sparc: copy exported sparc64 specific header files to asm-sparc

Copy was done using the following simple script:

set -e
SPARC64="h display7seg.h envctrl.h psrcompat.h pstate.h uctx.h utrap.h watchdog.h"
for FILE in ${SPARC64}; do
	if [ -f asm-sparc/$FILE ]; then
		echo $FILE exist in asm-sparc
	fi
	cat asm-sparc64/$FILE > asm-sparc/$FILE
	printf "#include <asm-sparc/$FILE>\n" > asm-sparc64/$FILE
done

The name of the copied files are added to asm-sparc/Kbuild
to keep "make headers_check" functional.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

include/asm-sparc/Kbuild

@@ -3,11 +3,18 @@ include include/asm-generic/Kbuild.asm
 header-y += apc.h
 header-y += asi.h
 header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
 header-y += jsflash.h
 header-y += openpromio.h
+header-y += psrcompat.h
+header-y += pstate.h
 header-y += reg.h
 header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
 header-y += vfc_ioctls.h
+header-y += watchdog.h
 
 unifdef-y += fbio.h
 unifdef-y += perfctr.h

include/asm-sparc/display7seg.h

@@ -0,0 +1,79 @@
+/*
+ *
+ * display7seg - Driver interface for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef __display7seg_h__
+#define __display7seg_h__
+
+#define D7S_IOC	'p'
+
+#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)	/* Read device state	*/
+#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)	/* Write device state	*/
+#define D7SIOCTM _IO (D7S_IOC, 0x47)		/* Translate mode (FLIP)*/
+
+/*
+ * ioctl flag definitions
+ *
+ * POINT	- Toggle decimal point	(0=absent 1=present)
+ * ALARM	- Toggle alarm LED 		(0=green  1=red)
+ * FLIP		- Toggle inverted mode 	(0=normal 1=flipped)
+ * bits 0-4	- Character displayed	(see definitions below)
+ *
+ * Display segments are defined as follows,
+ * subject to D7S_FLIP register state:
+ *
+ *    a
+ *   ---
+ * f|   |b
+ *   -g-
+ * e|   |c
+ *   ---
+ *    d
+ */
+
+#define D7S_POINT	(1 << 7)	/* Decimal point*/
+#define D7S_ALARM	(1 << 6)	/* Alarm LED 	*/
+#define D7S_FLIP	(1 << 5)	/* Flip display */
+
+#define D7S_0		0x00		/* Numerals 0-9 */
+#define D7S_1		0x01
+#define D7S_2		0x02
+#define D7S_3		0x03
+#define D7S_4		0x04
+#define D7S_5		0x05
+#define D7S_6		0x06
+#define D7S_7		0x07
+#define D7S_8		0x08
+#define D7S_9		0x09
+#define D7S_A		0x0A		/* Letters A-F, H, L, P */
+#define D7S_B		0x0B
+#define D7S_C		0x0C
+#define D7S_D		0x0D
+#define D7S_E		0x0E
+#define D7S_F		0x0F
+#define D7S_H		0x10
+#define D7S_E2		0x11
+#define D7S_L		0x12
+#define D7S_P		0x13
+#define D7S_SEGA	0x14		/* Individual segments */
+#define D7S_SEGB	0x15
+#define D7S_SEGC	0x16
+#define D7S_SEGD	0x17
+#define D7S_SEGE	0x18
+#define D7S_SEGF	0x19
+#define D7S_SEGG	0x1A
+#define D7S_SEGABFG 0x1B		/* Segment groupings */
+#define D7S_SEGCDEG	0x1C
+#define D7S_SEGBCEF 0x1D
+#define D7S_SEGADG	0x1E
+#define D7S_BLANK	0x1F		/* Clear all segments */
+
+#define D7S_MIN_VAL	0x0
+#define D7S_MAX_VAL	0x1F
+
+#endif /* ifndef __display7seg_h__ */

include/asm-sparc/envctrl.h

@@ -0,0 +1,103 @@
+/*
+ *
+ * envctrl.h: Definitions for access to the i2c environment
+ *            monitoring on Ultrasparc systems.
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
+ * VT - Add all ioctl commands and environment status definitions
+ * VT - Add application note
+ */
+#ifndef _SPARC64_ENVCTRL_H
+#define _SPARC64_ENVCTRL_H 1
+
+#include <linux/ioctl.h>
+
+/* Application note:
+ *
+ * The driver supports 4 operations: open(), close(), ioctl(), read()
+ * The device name is /dev/envctrl.
+ * Below is sample usage:
+ *
+ *	fd = open("/dev/envtrl", O_RDONLY);
+ *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *	close(fd);
+ *
+ * Notice in the case of cpu voltage and temperature, the default is
+ * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
+ * pass in cpu number in ioctl() last parameter.  For example, to
+ * get the voltage of cpu2:
+ *
+ *	ioctlbuf[0] = 2;
+ *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *
+ * All the return values are in ascii.  So check read return value
+ * and do appropriate conversions in your application.
+ */
+
+/* IOCTL commands */
+
+/* Note: these commands reflect possible monitor features.
+ * Some boards choose to support some of the features only.
+ */
+#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
+#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
+#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
+#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
+#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
+#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
+#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
+#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
+#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
+
+#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
+
+/* Read return values for a voltage status request. */
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
+#define ENVCTRL_VOLTAGE_BAD			0x02
+#define ENVCTRL_POWERSUPPLY_BAD			0x03
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
+
+/* Read return values for a fan status request.
+ * A failure match means either the fan fails or
+ * the fan is not connected.  Some boards have optional
+ * connectors to connect extra fans.
+ *
+ * There are maximum 8 monitor fans.  Some are cpu fans
+ * some are system fans.  The mask below only indicates
+ * fan by order number.
+ * Below is a sample application:
+ *
+ *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
+ *		printf("ioctl fan failed\n");
+ *	}
+ *	if (read(fd, rslt, 1) <= 0) {
+ *		printf("error or fan not monitored\n");
+ *	} else {
+ *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
+ *			printf("all fans good\n");
+ *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
+ *		printf("all fans bad\n");
+ *	} else {
+ *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
+ *			printf("fan 0 failed or not connected\n");
+ *	}
+ *	......
+ */
+
+#define ENVCTRL_ALL_FANS_GOOD			0x00
+#define ENVCTRL_FAN0_FAILURE_MASK		0x01
+#define ENVCTRL_FAN1_FAILURE_MASK		0x02
+#define ENVCTRL_FAN2_FAILURE_MASK		0x04
+#define ENVCTRL_FAN3_FAILURE_MASK		0x08
+#define ENVCTRL_FAN4_FAILURE_MASK		0x10
+#define ENVCTRL_FAN5_FAILURE_MASK		0x20
+#define ENVCTRL_FAN6_FAILURE_MASK		0x40
+#define ENVCTRL_FAN7_FAILURE_MASK		0x80
+#define ENVCTRL_ALL_FANS_BAD 			0xFF
+
+#endif /* !(_SPARC64_ENVCTRL_H) */

include/asm-sparc/psrcompat.h

@@ -0,0 +1,45 @@
+#ifndef _SPARC64_PSRCOMPAT_H
+#define _SPARC64_PSRCOMPAT_H
+
+#include <asm/pstate.h>
+
+/* Old 32-bit PSR fields for the compatibility conversion code. */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
+#define PSR_XCC	    0x000f0000         /* if PSR_V8PLUS, this is %xcc */
+
+static inline unsigned int tstate_to_psr(unsigned long tstate)
+{
+	return ((tstate & TSTATE_CWP)			|
+		PSR_S					|
+		((tstate & TSTATE_ICC) >> 12)		|
+		((tstate & TSTATE_XCC) >> 20)		|
+		((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
+		PSR_V8PLUS);
+}
+
+static inline unsigned long psr_to_tstate_icc(unsigned int psr)
+{
+	unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
+	if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
+		tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
+	return tstate;
+}
+
+#endif /* !(_SPARC64_PSRCOMPAT_H) */

include/asm-sparc/pstate.h

@@ -0,0 +1,91 @@
+#ifndef _SPARC64_PSTATE_H
+#define _SPARC64_PSTATE_H
+
+#include <linux/const.h>
+
+/* The V9 PSTATE Register (with SpitFire extensions).
+ *
+ * -----------------------------------------------------------------------
+ * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
+ * -----------------------------------------------------------------------
+ *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
+ */
+#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.	*/
+#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.		*/
+#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
+#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.	*/
+#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.		*/
+#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder	*/
+#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder	*/
+#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
+#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.	*/
+#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
+#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.		*/
+#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.		*/
+#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.	*/
+#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.	*/
+
+/* The V9 TSTATE Register (with SpitFire and Linux extensions).
+ *
+ * ---------------------------------------------------------------------
+ * |  Resv |  GL  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
+ * ---------------------------------------------------------------------
+ *  63   43 42  40 39   32 31   24 23    20 19       8 7      5 4     0
+ */
+#define TSTATE_GL	_AC(0x0000070000000000,UL) /* Global reg level  */
+#define TSTATE_CCR	_AC(0x000000ff00000000,UL) /* Condition Codes.	*/
+#define TSTATE_XCC	_AC(0x000000f000000000,UL) /* Condition Codes.	*/
+#define TSTATE_XNEG	_AC(0x0000008000000000,UL) /* %xcc Negative.	*/
+#define TSTATE_XZERO	_AC(0x0000004000000000,UL) /* %xcc Zero.	*/
+#define TSTATE_XOVFL	_AC(0x0000002000000000,UL) /* %xcc Overflow.	*/
+#define TSTATE_XCARRY	_AC(0x0000001000000000,UL) /* %xcc Carry.	*/
+#define TSTATE_ICC	_AC(0x0000000f00000000,UL) /* Condition Codes.	*/
+#define TSTATE_INEG	_AC(0x0000000800000000,UL) /* %icc Negative.	*/
+#define TSTATE_IZERO	_AC(0x0000000400000000,UL) /* %icc Zero.	*/
+#define TSTATE_IOVFL	_AC(0x0000000200000000,UL) /* %icc Overflow.	*/
+#define TSTATE_ICARRY	_AC(0x0000000100000000,UL) /* %icc Carry.	*/
+#define TSTATE_ASI	_AC(0x00000000ff000000,UL) /* AddrSpace ID.	*/
+#define TSTATE_PIL	_AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
+#define TSTATE_PSTATE	_AC(0x00000000000fff00,UL) /* PSTATE.		*/
+#define TSTATE_IG	_AC(0x0000000000080000,UL) /* Interrupt Globals.*/
+#define TSTATE_MG	_AC(0x0000000000040000,UL) /* MMU Globals.	*/
+#define TSTATE_CLE	_AC(0x0000000000020000,UL) /* CurrLittleEndian.	*/
+#define TSTATE_TLE	_AC(0x0000000000010000,UL) /* TrapLittleEndian.	*/
+#define TSTATE_MM	_AC(0x000000000000c000,UL) /* Memory Model.	*/
+#define TSTATE_TSO	_AC(0x0000000000000000,UL) /* MM: TSO		*/
+#define TSTATE_PSO	_AC(0x0000000000004000,UL) /* MM: PSO		*/
+#define TSTATE_RMO	_AC(0x0000000000008000,UL) /* MM: RMO		*/
+#define TSTATE_RED	_AC(0x0000000000002000,UL) /* Reset Error Debug.*/
+#define TSTATE_PEF	_AC(0x0000000000001000,UL) /* FPU Enable.	*/
+#define TSTATE_AM	_AC(0x0000000000000800,UL) /* Address Mask.	*/
+#define TSTATE_PRIV	_AC(0x0000000000000400,UL) /* Privilege.	*/
+#define TSTATE_IE	_AC(0x0000000000000200,UL) /* Interrupt Enable.	*/
+#define TSTATE_AG	_AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_SYSCALL	_AC(0x0000000000000020,UL) /* in syscall trap   */
+#define TSTATE_CWP	_AC(0x000000000000001f,UL) /* Curr Win-Pointer.	*/
+
+/* Floating-Point Registers State Register.
+ *
+ * --------------------------------
+ * |  Resv  |  FEF  |  DU  |  DL  |
+ * --------------------------------
+ *  63     3    2       1      0
+ */
+#define FPRS_FEF	_AC(0x0000000000000004,UL) /* FPU Enable.	*/
+#define FPRS_DU		_AC(0x0000000000000002,UL) /* Dirty Upper.	*/
+#define FPRS_DL		_AC(0x0000000000000001,UL) /* Dirty Lower.	*/
+
+/* Version Register.
+ *
+ * ------------------------------------------------------
+ * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
+ * ------------------------------------------------------
+ *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
+ */
+#define VERS_MANUF	_AC(0xffff000000000000,UL) /* Manufacturer.	*/
+#define VERS_IMPL	_AC(0x0000ffff00000000,UL) /* Implementation.	*/
+#define VERS_MASK	_AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
+#define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
+#define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
+
+#endif /* !(_SPARC64_PSTATE_H) */