---

yaml
---
r: 231207
b: refs/heads/master
c: bb12310
h: refs/heads/master
i:
  231205: a824329
  231203: fbb7f28
  231199: fec74c5
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4e5518ca53be29c1ec3c00089c97bef36bfed515
+refs/heads/master: bb1231052e265e960d902ab32e67c5ccdabc9434

trunk/drivers/net/Kconfig

@@ -1950,14 +1950,6 @@ config FEC
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
 	  controller on some Motorola ColdFire and Freescale i.MX processors.
 
-config FEC2
-	bool "Second FEC ethernet controller"
-	depends on FEC
-	help
-	  Say Y here if you want to use the second built-in 10/100 Fast
-	  ethernet controller on some Motorola ColdFire and Freescale
-	  i.MX processors.
-
 config FEC_MPC52xx
 	tristate "MPC52xx FEC driver"
 	depends on PPC_MPC52xx && PPC_BESTCOMM

trunk/drivers/net/bfin_mac.c

@@ -8,6 +8,11 @@
  * Licensed under the GPL-2 or later.
  */
 
+#define DRV_VERSION	"1.1"
+#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -41,12 +46,7 @@
 
 #include "bfin_mac.h"
 
-#define DRV_NAME	"bfin_mac"
-#define DRV_VERSION	"1.1"
-#define DRV_AUTHOR	"Bryan Wu, Luke Yang"
-#define DRV_DESC	"Blackfin on-chip Ethernet MAC driver"
-
-MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_AUTHOR("Bryan Wu, Luke Yang");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRV_DESC);
 MODULE_ALIAS("platform:bfin_mac");
@@ -189,8 +189,7 @@ static int desc_list_init(void)
 		/* allocate a new skb for next time receive */
 		new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 		if (!new_skb) {
-			printk(KERN_NOTICE DRV_NAME
-			       ": init: low on mem - packet dropped\n");
+			pr_notice("init: low on mem - packet dropped\n");
 			goto init_error;
 		}
 		skb_reserve(new_skb, NET_IP_ALIGN);
@@ -240,7 +239,7 @@ static int desc_list_init(void)
 
 init_error:
 	desc_list_free();
-	printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
+	pr_err("kmalloc failed\n");
 	return -ENOMEM;
 }
 
@@ -259,8 +258,7 @@ static int bfin_mdio_poll(void)
 	while ((bfin_read_EMAC_STAADD()) & STABUSY) {
 		udelay(1);
 		if (timeout_cnt-- < 0) {
-			printk(KERN_ERR DRV_NAME
-			": wait MDC/MDIO transaction to complete timeout\n");
+			pr_err("wait MDC/MDIO transaction to complete timeout\n");
 			return -ETIMEDOUT;
 		}
 	}
@@ -350,9 +348,9 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 					opmode &= ~RMII_10;
 					break;
 				default:
-					printk(KERN_WARNING
-						"%s: Ack!  Speed (%d) is not 10/100!\n",
-						DRV_NAME, phydev->speed);
+					netdev_warn(dev,
+						"Ack! Speed (%d) is not 10/100!\n",
+						phydev->speed);
 					break;
 				}
 				bfin_write_EMAC_OPMODE(opmode);
@@ -417,22 +415,21 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 
 	/* now we are supposed to have a proper phydev, to attach to... */
 	if (!phydev) {
-		printk(KERN_INFO "%s: Don't found any phy device at all\n",
-			dev->name);
+		netdev_err(dev, "no phy device found\n");
 		return -ENODEV;
 	}
 
 	if (phy_mode != PHY_INTERFACE_MODE_RMII &&
 		phy_mode != PHY_INTERFACE_MODE_MII) {
-		printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
+		netdev_err(dev, "invalid phy interface mode\n");
 		return -EINVAL;
 	}
 
 	phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
 			0, phy_mode);
 
 	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "could not attach PHY\n");
 		return PTR_ERR(phydev);
 	}
 
@@ -453,11 +450,10 @@ static int mii_probe(struct net_device *dev, int phy_mode)
 	lp->old_duplex = -1;
 	lp->phydev = phydev;
 
-	printk(KERN_INFO "%s: attached PHY driver [%s] "
-	       "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
-	       "@sclk=%dMHz)\n",
-	       DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
-	       MDC_CLK, mdc_div, sclk/1000000);
+	pr_info("attached PHY driver [%s] "
+	        "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
+	        phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
+	        MDC_CLK, mdc_div, sclk/1000000);
 
 	return 0;
 }
@@ -502,7 +498,7 @@ bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
 static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
 					struct ethtool_drvinfo *info)
 {
-	strcpy(info->driver, DRV_NAME);
+	strcpy(info->driver, KBUILD_MODNAME);
 	strcpy(info->version, DRV_VERSION);
 	strcpy(info->fw_version, "N/A");
 	strcpy(info->bus_info, dev_name(&dev->dev));
@@ -562,7 +558,7 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
 };
 
 /**************************************************************************/
-void setup_system_regs(struct net_device *dev)
+static void setup_system_regs(struct net_device *dev)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
 	int i;
@@ -592,6 +588,10 @@ void setup_system_regs(struct net_device *dev)
 
 	bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
 
+	/* Set vlan regs to let 1522 bytes long packets pass through */
+	bfin_write_EMAC_VLAN1(lp->vlan1_mask);
+	bfin_write_EMAC_VLAN2(lp->vlan2_mask);
+
 	/* Initialize the TX DMA channel registers */
 	bfin_write_DMA2_X_COUNT(0);
 	bfin_write_DMA2_X_MODIFY(4);
@@ -827,8 +827,7 @@ static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
 		while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
 			udelay(1);
 		if (timeout_cnt == 0)
-			printk(KERN_ERR DRV_NAME
-					": fails to timestamp the TX packet\n");
+			netdev_err(netdev, "timestamp the TX packet failed\n");
 		else {
 			struct skb_shared_hwtstamps shhwtstamps;
 			u64 ns;
@@ -1083,8 +1082,7 @@ static void bfin_mac_rx(struct net_device *dev)
 	 * we which case we simply drop the packet
 	 */
 	if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
-		printk(KERN_NOTICE DRV_NAME
-		       ": rx: receive error - packet dropped\n");
+		netdev_notice(dev, "rx: receive error - packet dropped\n");
 		dev->stats.rx_dropped++;
 		goto out;
 	}
@@ -1094,8 +1092,7 @@ static void bfin_mac_rx(struct net_device *dev)
 
 	new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
 	if (!new_skb) {
-		printk(KERN_NOTICE DRV_NAME
-		       ": rx: low on mem - packet dropped\n");
+		netdev_notice(dev, "rx: low on mem - packet dropped\n");
 		dev->stats.rx_dropped++;
 		goto out;
 	}
@@ -1213,7 +1210,7 @@ static int bfin_mac_enable(struct phy_device *phydev)
 	int ret;
 	u32 opmode;
 
-	pr_debug("%s: %s\n", DRV_NAME, __func__);
+	pr_debug("%s\n", __func__);
 
 	/* Set RX DMA */
 	bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@@ -1296,7 +1293,7 @@ static void bfin_mac_multicast_hash(struct net_device *dev)
 		addrs = ha->addr;
 
 		/* skip non-multicast addresses */
-		if (!(*addrs & 1))
+		if (!is_multicast_ether_addr(addrs))
 			continue;
 
 		crc = ether_crc(ETH_ALEN, addrs);
@@ -1323,7 +1320,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
 	u32 sysctl;
 
 	if (dev->flags & IFF_PROMISC) {
-		printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
+		netdev_info(dev, "set promisc mode\n");
 		sysctl = bfin_read_EMAC_OPMODE();
 		sysctl |= PR;
 		bfin_write_EMAC_OPMODE(sysctl);
@@ -1393,7 +1390,7 @@ static int bfin_mac_open(struct net_device *dev)
 	 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
 	 */
 	if (!is_valid_ether_addr(dev->dev_addr)) {
-		printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
+		netdev_warn(dev, "no valid ethernet hw addr\n");
 		return -EINVAL;
 	}
 
@@ -1527,6 +1524,9 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 		goto out_err_mii_probe;
 	}
 
+	lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
+	lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
+
 	/* Fill in the fields of the device structure with ethernet values. */
 	ether_setup(ndev);
 
@@ -1558,7 +1558,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
 	bfin_mac_hwtstamp_init(ndev);
 
 	/* now, print out the card info, in a short format.. */
-	dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
+	netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
 
 	return 0;
 
@@ -1650,7 +1650,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 	 * so set the GPIO pins to Ethernet mode
 	 */
 	pin_req = mii_bus_pd->mac_peripherals;
-	rc = peripheral_request_list(pin_req, DRV_NAME);
+	rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
 	if (rc) {
 		dev_err(&pdev->dev, "Requesting peripherals failed!\n");
 		return rc;
@@ -1739,7 +1739,7 @@ static struct platform_driver bfin_mac_driver = {
 	.resume = bfin_mac_resume,
 	.suspend = bfin_mac_suspend,
 	.driver = {
-		.name = DRV_NAME,
+		.name = KBUILD_MODNAME,
 		.owner	= THIS_MODULE,
 	},
 };

trunk/drivers/net/bfin_mac.h

@@ -17,7 +17,14 @@
 #include <linux/etherdevice.h>
 #include <linux/bfin_mac.h>
 
+/*
+ * Disable hardware checksum for bug #5600 if writeback cache is
+ * enabled. Otherwize, corrupted RX packet will be sent up stack
+ * without error mark.
+ */
+#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
 #define BFIN_MAC_CSUM_OFFLOAD
+#endif
 
 #define TX_RECLAIM_JIFFIES (HZ / 5)
 
@@ -68,14 +75,16 @@ struct bfin_mac_local {
 	 */
 	struct net_device_stats stats;
 
-	unsigned char Mac[6];	/* MAC address of the board */
 	spinlock_t lock;
 
 	int wol;		/* Wake On Lan */
 	int irq_wake_requested;
 	struct timer_list tx_reclaim_timer;
 	struct net_device *ndev;
 
+	/* Data for EMAC_VLAN1 regs */
+	u16 vlan1_mask, vlan2_mask;
+
 	/* MII and PHY stuffs */
 	int old_link;          /* used by bf537_adjust_link */
 	int old_speed;

trunk/drivers/net/cxgb4vf/cxgb4vf_main.c

@@ -749,13 +749,19 @@ static int cxgb4vf_open(struct net_device *dev)
 	netif_set_real_num_tx_queues(dev, pi->nqsets);
 	err = netif_set_real_num_rx_queues(dev, pi->nqsets);
 	if (err)
-		return err;
-	set_bit(pi->port_id, &adapter->open_device_map);
+		goto err_unwind;
 	err = link_start(dev);
 	if (err)
-		return err;
+		goto err_unwind;
+
 	netif_tx_start_all_queues(dev);
+	set_bit(pi->port_id, &adapter->open_device_map);
 	return 0;
+
+err_unwind:
+	if (adapter->open_device_map == 0)
+		adapter_down(adapter);
+	return err;
 }
 
 /*
@@ -764,13 +770,12 @@ static int cxgb4vf_open(struct net_device *dev)
  */
 static int cxgb4vf_stop(struct net_device *dev)
 {
-	int ret;
 	struct port_info *pi = netdev_priv(dev);
 	struct adapter *adapter = pi->adapter;
 
 	netif_tx_stop_all_queues(dev);
 	netif_carrier_off(dev);
-	ret = t4vf_enable_vi(adapter, pi->viid, false, false);
+	t4vf_enable_vi(adapter, pi->viid, false, false);
 	pi->link_cfg.link_ok = 0;
 
 	clear_bit(pi->port_id, &adapter->open_device_map);

trunk/drivers/net/cxgb4vf/t4vf_hw.c

@@ -147,9 +147,20 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
 	/*
 	 * Write the command array into the Mailbox Data register array and
 	 * transfer ownership of the mailbox to the firmware.
+	 *
+	 * For the VFs, the Mailbox Data "registers" are actually backed by
+	 * T4's "MA" interface rather than PL Registers (as is the case for
+	 * the PFs).  Because these are in different coherency domains, the
+	 * write to the VF's PL-register-backed Mailbox Control can race in
+	 * front of the writes to the MA-backed VF Mailbox Data "registers".
+	 * So we need to do a read-back on at least one byte of the VF Mailbox
+	 * Data registers before doing the write to the VF Mailbox Control
+	 * register.
 	 */
 	for (i = 0, p = cmd; i < size; i += 8)
 		t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++));
+	t4_read_reg(adapter, mbox_data);         /* flush write */
+
 	t4_write_reg(adapter, mbox_ctl,
 		     MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
 	t4_read_reg(adapter, mbox_ctl);          /* flush write */

trunk/drivers/net/ehea/ehea.h

@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0106"
+#define DRV_VERSION	"EHEA_0107"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1

trunk/drivers/net/ehea/ehea_main.c

@@ -437,7 +437,7 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
 		}
 	}
 	/* Ring doorbell */
-	ehea_update_rq1a(pr->qp, i);
+	ehea_update_rq1a(pr->qp, i - 1);
 }
 
 static int ehea_refill_rq_def(struct ehea_port_res *pr,
@@ -1329,9 +1329,7 @@ static int ehea_fill_port_res(struct ehea_port_res *pr)
 	int ret;
 	struct ehea_qp_init_attr *init_attr = &pr->qp->init_attr;
 
-	ehea_init_fill_rq1(pr, init_attr->act_nr_rwqes_rq1
-			       - init_attr->act_nr_rwqes_rq2
-			       - init_attr->act_nr_rwqes_rq3 - 1);
+	ehea_init_fill_rq1(pr, pr->rq1_skba.len);
 
 	ret = ehea_refill_rq2(pr, init_attr->act_nr_rwqes_rq2 - 1);
 

trunk/drivers/net/mlx4/en_netdev.c

@@ -972,7 +972,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	int i;
 	int err;
 
-	dev = alloc_etherdev_mq(sizeof(struct mlx4_en_priv), prof->tx_ring_num);
+	dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv),
+	    prof->tx_ring_num, prof->rx_ring_num);
 	if (dev == NULL) {
 		mlx4_err(mdev, "Net device allocation failed\n");
 		return -ENOMEM;

trunk/drivers/net/pcmcia/pcnet_cs.c

@@ -1536,6 +1536,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
 	PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
 	PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),