ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc

32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/ppc/Kconfig

@@ -61,26 +61,22 @@ config 6xx
 	select PPC_FPU
 	help
 	  There are four types of PowerPC chips supported.  The more common
-	  types (601, 603, 604, 740, 750, 7400), the Motorola embedded
-	  versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
-	  embedded versions (403 and 405) and the POWER3 processor.
-	  (For support for more recent 64-bit processors, set ARCH=powerpc.)
+	  types (601, 603, 604, 740, 750, 7400), the older Freescale
+	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
+	  52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
+	  For support for 64-bit processors, set ARCH=powerpc.
 	  Unless you are building a kernel for one of the embedded processor
-	  systems or a POWER3-based IBM RS/6000, choose 6xx.
-	  Note that the kernel runs in 32-bit mode even on 64-bit chips.
-	  Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
-	  specific support for that chipset is asked later on.
+	  systems, choose 6xx.
+	  Also note that because the 52xx, 82xx, & 83xx family have a 603e
+	  core, specific support for that chipset is asked later on.
 
 config 40x
 	bool "40x"
 
 config 44x
 	bool "44x"
 
-config POWER3
-	select PPC_FPU
-	bool "POWER3"
-
 config 8xx
 	bool "8xx"
 
@@ -252,14 +248,9 @@ config PPC601_SYNC_FIX
 source arch/ppc/platforms/4xx/Kconfig
 source arch/ppc/platforms/85xx/Kconfig
 
-config PPC64BRIDGE
-	bool
-	depends on POWER3
-	default y
-
 config PPC_STD_MMU
 	bool
-	depends on 6xx || POWER3
+	depends on 6xx
 	default y
 
 config NOT_COHERENT_CACHE
@@ -534,8 +525,8 @@ endmenu
 
 choice
 	prompt "Machine Type"
-	depends on 6xx || POWER3
-	default PPC_MULTIPLATFORM
+	depends on 6xx
+	default PPC_PREP
 	---help---
 	  Linux currently supports several different kinds of PowerPC-based
 	  machines: Apple Power Macintoshes and clones (such as the Motorola
@@ -545,15 +536,14 @@ choice
 	  Platform) machines (including all of the recent IBM RS/6000 and
 	  pSeries machines), and several embedded PowerPC systems containing
 	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on PReP and CHRP.
+	  default option is to build a kernel which works on PReP.
 
-	  Note that support for Apple machines is now only available with
-	  ARCH=powerpc, and has been removed from this menu.  If you wish
-	  to build a kernel for an Apple machine, exit this configuration
-	  process and re-run it with ARCH=powerpc.
+	  Note that support for Apple and CHRP machines is now only available
+	  with ARCH=powerpc, and has been removed from this menu.  If you
+	  wish to build a kernel for an Apple or CHRP machine, exit this
+	  configuration process and re-run it with ARCH=powerpc.
 
-	  Select CHRP/PReP if configuring for an IBM RS/6000 or
-	  pSeries machine, or a PReP machine.
+	  Select PReP if configuring for a PReP machine.
 
 	  Select Gemini if configuring for a Synergy Microsystems' Gemini
 	  series Single Board Computer.  More information is available at:
@@ -562,8 +552,8 @@ choice
 	  Select APUS if configuring for a PowerUP Amiga.  More information is
 	  available at: <http://linux-apus.sourceforge.net/>.
 
-config PPC_MULTIPLATFORM
-	bool "CHRP/PReP"
+config PPC_PREP
+	bool "PReP"
 
 config APUS
 	bool "Amiga-APUS"
@@ -807,25 +797,6 @@ config CPM2
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CHRP
-	bool "Support for CHRP (Common Hardware Reference Platform) machines"
-	depends on PPC_MULTIPLATFORM
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	default y
-
-config PPC_PREP
-	bool "Support for PReP (PowerPC Reference Platform) machines"
-	depends on PPC_MULTIPLATFORM
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	default y
-
-config PPC_OF
-	bool
-	depends on PPC_CHRP
-	default y
-
 config PPC_GEN550
 	bool
 	depends on SANDPOINT || SPRUCE || PPLUS || \
@@ -984,14 +955,6 @@ source "mm/Kconfig"
 
 source "fs/Kconfig.binfmt"
 
-config PROC_DEVICETREE
-	bool "Support for Open Firmware device tree in /proc"
-	depends on PPC_OF && PROC_FS
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware. If unsure, say Y here.
-
 config PREP_RESIDUAL
 	bool "Support for PReP Residual Data"
 	depends on PPC_PREP
@@ -1184,8 +1147,7 @@ menu "Bus options"
 
 config ISA
 	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP || PPC_CHRP
-	select PPC_I8259
+	depends on PPC_PREP
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1195,18 +1157,18 @@ config ISA
 
 config GENERIC_ISA_DMA
 	bool
-	depends on POWER3 || 6xx && !CPM2
+	depends on 6xx && !CPM2
 	default y
 
 config PPC_I8259
 	bool
-	default y if 85xx
+	default y if 85xx || PPC_PREP
 	default n
 
 config PPC_INDIRECT_PCI
 	bool
 	depends on PCI
-	default y if 40x || 44x || 85xx || 83xx
+	default y if 40x || 44x || 85xx || 83xx || PPC_PREP
 	default n
 
 config EISA
@@ -1397,7 +1359,7 @@ config CONSISTENT_SIZE
 
 config BOOT_LOAD_BOOL
 	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+	depends on ADVANCED_OPTIONS && !PPC_PREP
 	help
 	  This option allows you to set the initial load address of the zImage
 	  or zImage.initrd file.  This can be useful if you are on a board

arch/ppc/Kconfig.debug

@@ -53,13 +53,6 @@ config BDI_SWITCH
 	  Unless you are intending to debug the kernel with one of these
 	  machines, say N here.
 
-config BOOTX_TEXT
-	bool "Support for early boot text console (BootX or OpenFirmware only)"
-	depends PPC_OF
-	help
-	  Say Y here to see progress messages from the boot firmware in text
-	  mode. Requires either BootX or Open Firmware.
-
 config SERIAL_TEXT_DEBUG
 	bool "Support for early boot texts over serial port"
 	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \

arch/ppc/Makefile

@@ -40,10 +40,8 @@ ifndef CONFIG_FSL_BOOKE
 CFLAGS		+= -mstring
 endif
 
-cpu-as-$(CONFIG_PPC64BRIDGE)	+= -Wa,-mppc64bridge
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 

arch/ppc/boot/Makefile

@@ -19,14 +19,13 @@ HOSTCFLAGS	+= -Iarch/$(ARCH)/boot/include
 BOOT_TARGETS	= zImage zImage.initrd znetboot znetboot.initrd
 
 bootdir-y			:= simple
-bootdir-$(CONFIG_PPC_OF)	+= openfirmware
 subdir-y			:= lib common images
-subdir-$(CONFIG_PPC_MULTIPLATFORM)	+= of1275
+subdir-$(CONFIG_PPC_PREP)	+= of1275
 
 # for cleaning
-subdir-				+= simple openfirmware
+subdir-				+= simple
 
-hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
+hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
 
 PHONY += $(BOOT_TARGETS) $(bootdir-y)