---

yaml
---
r: 355740
b: refs/heads/master
c: dea3eac
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5f66d482af4e12e2a2d4cda0686820550b80ac8e
+refs/heads/master: dea3eacd087cfa692ea20aafbfaf4827607afe45

trunk/arch/arm/mach-nomadik/cpu-8815.c

@@ -38,7 +38,6 @@
 #include <linux/gpio.h>
 #include <linux/amba/mmci.h>
 
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -48,6 +47,51 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+/*
+ * These are the only hard-coded address offsets we still have to use.
+ */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
+#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
+#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
+#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
+#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
+#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
+#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
+#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
+#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
+#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
+#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
+#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
+#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
+#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
+#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
+#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
+#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
+#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
+#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
+#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
+#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface */
+#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
+#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface */
+#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
+#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
+#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
+#define NOMADIK_UART1_VBASE	0xF01FB000
+
 static unsigned long out_low[] = { PIN_OUTPUT_LOW };
 static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
 static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
@@ -90,30 +134,29 @@ static struct pinctrl_map __initdata nhk8815_pinmap[] = {
 	PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
 };
 
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc cpu8815_io_desc[] __initdata = {
 	{
-		.virtual =	NOMADIK_IO_VIRTUAL,
-		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
-		.length =	NOMADIK_IO_SIZE,
-		.type = 	MT_DEVICE,
-	}
-	/* static ram and secured ram may be added later */
+		.virtual =	NOMADIK_UART1_VBASE,
+		.pfn =		__phys_to_pfn(NOMADIK_UART1_BASE),
+		.length =	SZ_4K,
+		.type =		MT_DEVICE,
+	},
 };
 
 static void __init cpu8815_map_io(void)
 {
-	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+	iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc));
 }
 
 static void cpu8815_restart(char mode, const char *cmd)
 {
-	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+	void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K);
 
 	/* FIXME: use egpio when implemented */
 
 	/* Write anything to Reset status register */
-	writel(1, src_rstsr);
+	writel(1, srcbase + 0x18);
 }
 
 /* Initial value for SRC control register: all timers use MXTAL/8 source */

trunk/arch/arm/mach-nomadik/include/mach/irqs.h

@@ -20,8 +20,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-#include <mach/hardware.h>
-
 #define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
 
 /*

trunk/arch/arm/mach-nomadik/include/mach/uncompress.h

@@ -21,7 +21,6 @@
 
 #include <asm/setup.h>
 #include <asm/io.h>
-#include <mach/hardware.h>
 
 /* we need the constants in amba/serial.h, but it refers to amba_device */
 struct amba_device;