---

yaml
---
r: 74015
b: refs/heads/master
c: d12dbbf
h: refs/heads/master
i:
  74013: 2e13cca
  74011: f9b7e67
  74007: fc784a2
  73999: 7543ea9
  73983: 5947654
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 59f91ff11e594913a5b3c03a4707fdf02338c8df
+refs/heads/master: d12dbbfe948c89156ad1b0fe7c808ba4d6f00bc2

trunk/Documentation/accounting/getdelays.c

@@ -25,6 +25,7 @@
 
 #include <linux/genetlink.h>
 #include <linux/taskstats.h>
+#include <linux/cgroupstats.h>
 
 /*
  * Generic macros for dealing with netlink sockets. Might be duplicated
@@ -78,6 +79,7 @@ static void usage(void)
 	fprintf(stderr, "  -i: print IO accounting (works only with -p)\n");
 	fprintf(stderr, "  -l: listen forever\n");
 	fprintf(stderr, "  -v: debug on\n");
+	fprintf(stderr, "  -C: container path\n");
 }
 
 /*
@@ -212,6 +214,14 @@ void task_context_switch_counts(struct taskstats *t)
 	       t->nvcsw, t->nivcsw);
 }
 
+void print_cgroupstats(struct cgroupstats *c)
+{
+	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
+		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
+		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+}
+
+
 void print_ioacct(struct taskstats *t)
 {
 	printf("%s: read=%llu, write=%llu, cancelled_write=%llu\n",
@@ -239,11 +249,14 @@ int main(int argc, char *argv[])
 	int maskset = 0;
 	char *logfile = NULL;
 	int loop = 0;
+	int containerset = 0;
+	char containerpath[1024];
+	int cfd = 0;
 
 	struct msgtemplate msg;
 
 	while (1) {
-		c = getopt(argc, argv, "qdiw:r:m:t:p:vl");
+		c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:");
 		if (c < 0)
 			break;
 
@@ -260,6 +273,10 @@ int main(int argc, char *argv[])
 			printf("printing task/process context switch rates\n");
 			print_task_context_switch_counts = 1;
 			break;
+		case 'C':
+			containerset = 1;
+			strncpy(containerpath, optarg, strlen(optarg) + 1);
+			break;
 		case 'w':
 			logfile = strdup(optarg);
 			printf("write to file %s\n", logfile);
@@ -334,6 +351,11 @@ int main(int argc, char *argv[])
 		}
 	}
 
+	if (tid && containerset) {
+		fprintf(stderr, "Select either -t or -C, not both\n");
+		goto err;
+	}
+
 	if (tid) {
 		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
 			      cmd_type, &tid, sizeof(__u32));
@@ -344,6 +366,20 @@ int main(int argc, char *argv[])
 		}
 	}
 
+	if (containerset) {
+		cfd = open(containerpath, O_RDONLY);
+		if (cfd < 0) {
+			perror("error opening container file");
+			goto err;
+		}
+		rc = send_cmd(nl_sd, id, mypid, CGROUPSTATS_CMD_GET,
+			      CGROUPSTATS_CMD_ATTR_FD, &cfd, sizeof(__u32));
+		if (rc < 0) {
+			perror("error sending cgroupstats command");
+			goto err;
+		}
+	}
+
 	do {
 		int i;
 
@@ -422,6 +458,9 @@ int main(int argc, char *argv[])
 				}
 				break;
 
+			case CGROUPSTATS_TYPE_CGROUP_STATS:
+				print_cgroupstats(NLA_DATA(na));
+				break;
 			default:
 				fprintf(stderr, "Unknown nla_type %d\n",
 					na->nla_type);
@@ -443,5 +482,7 @@ int main(int argc, char *argv[])
 	close(nl_sd);
 	if (fd)
 		close(fd);
+	if (cfd)
+		close(cfd);
 	return 0;
 }

trunk/Documentation/feature-removal-schedule.txt

@@ -181,15 +181,6 @@ Who:	Nick Piggin <npiggin@suse.de>
 
 ---------------------------
 
-What:	Interrupt only SA_* flags
-When:	September 2007
-Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
-	out of the signal namespace.
-
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
 What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
 When:	October 2008
 Why:	The stacking of class devices makes these values misleading and

trunk/Documentation/hwmon/sysfs-interface

@@ -328,6 +328,37 @@ curr[1-*]_input	Current input value
 		Unit: milliampere
 		RO
 
+*********
+* Power *
+*********
+
+power[1-*]_average		Average power use
+				Unit: microWatt
+				RO
+
+power[1-*]_average_highest	Historical average maximum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_average_lowest	Historical average minimum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_input		Instantaneous power use
+				Unit: microWatt
+				RO
+
+power[1-*]_input_highest	Historical maximum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_input_lowest		Historical minimum power use
+				Unit: microWatt
+				RO
+
+power[1-*]_reset_history	Reset input_highest, input_lowest,
+				average_highest and average_lowest.
+				WO
 
 **********
 * Alarms *

trunk/Documentation/lguest/lguest.c

@@ -62,8 +62,8 @@ typedef uint8_t u8;
 #endif
 /* We can have up to 256 pages for devices. */
 #define DEVICE_PAGES 256
-/* This fits nicely in a single 4096-byte page. */
-#define VIRTQUEUE_NUM 127
+/* This will occupy 2 pages: it must be a power of 2. */
+#define VIRTQUEUE_NUM 128
 
 /*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
  * this, and although I wouldn't recommend it, it works quite nicely here. */
@@ -1036,7 +1036,8 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	void *p;
 
 	/* First we need some pages for this virtqueue. */
-	pages = (vring_size(num_descs) + getpagesize() - 1) / getpagesize();
+	pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1)
+		/ getpagesize();
 	p = get_pages(pages);
 
 	/* Initialize the configuration. */
@@ -1045,7 +1046,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->config.pfn = to_guest_phys(p) / getpagesize();
 
 	/* Initialize the vring. */
-	vring_init(&vq->vring, num_descs, p);
+	vring_init(&vq->vring, num_descs, p, getpagesize());
 
 	/* Add the configuration information to this device's descriptor. */
 	add_desc_field(dev, VIRTIO_CONFIG_F_VIRTQUEUE,
@@ -1342,7 +1343,7 @@ static bool service_io(struct device *dev)
 	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
 		fprintf(stderr, "Scsi commands unsupported\n");
 		in->status = VIRTIO_BLK_S_UNSUPP;
-		wlen = sizeof(in);
+		wlen = sizeof(*in);
 	} else if (out->type & VIRTIO_BLK_T_OUT) {
 		/* Write */
 
@@ -1363,7 +1364,7 @@ static bool service_io(struct device *dev)
 			/* Die, bad Guest, die. */
 			errx(1, "Write past end %llu+%u", off, ret);
 		}
-		wlen = sizeof(in);
+		wlen = sizeof(*in);
 		in->status = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
 		/* Read */
@@ -1376,10 +1377,10 @@ static bool service_io(struct device *dev)
 		ret = readv(vblk->fd, iov+1, in_num-1);
 		verbose("READ from sector %llu: %i\n", out->sector, ret);
 		if (ret >= 0) {
-			wlen = sizeof(in) + ret;
+			wlen = sizeof(*in) + ret;
 			in->status = VIRTIO_BLK_S_OK;
 		} else {
-			wlen = sizeof(in);
+			wlen = sizeof(*in);
 			in->status = VIRTIO_BLK_S_IOERR;
 		}
 	}

trunk/Documentation/local_ops.txt

@@ -45,6 +45,29 @@ long fails. The definition looks like :
 typedef struct { atomic_long_t a; } local_t;
 
 
+* Rules to follow when using local atomic operations
+
+- Variables touched by local ops must be per cpu variables.
+- _Only_ the CPU owner of these variables must write to them.
+- This CPU can use local ops from any context (process, irq, softirq, nmi, ...)
+  to update its local_t variables.
+- Preemption (or interrupts) must be disabled when using local ops in
+  process context to   make sure the process won't be migrated to a
+  different CPU between getting the per-cpu variable and doing the
+  actual local op.
+- When using local ops in interrupt context, no special care must be
+  taken on a mainline kernel, since they will run on the local CPU with
+  preemption already disabled. I suggest, however, to explicitly
+  disable preemption anyway to make sure it will still work correctly on
+  -rt kernels.
+- Reading the local cpu variable will provide the current copy of the
+  variable.
+- Reads of these variables can be done from any CPU, because updates to
+  "long", aligned, variables are always atomic. Since no memory
+  synchronization is done by the writer CPU, an outdated copy of the
+  variable can be read when reading some _other_ cpu's variables.
+
+
 * Rules to follow when using local atomic operations
 
 - Variables touched by local ops must be per cpu variables.

trunk/Documentation/markers.txt

@@ -35,12 +35,14 @@ In order to use the macro trace_mark, you should include linux/marker.h.
 
 And,
 
-trace_mark(subsystem_event, "%d %s", someint, somestring);
+trace_mark(subsystem_event, "myint %d mystring %s", someint, somestring);
 Where :
 - subsystem_event is an identifier unique to your event
     - subsystem is the name of your subsystem.
     - event is the name of the event to mark.
-- "%d %s" is the formatted string for the serializer.
+- "myint %d mystring %s" is the formatted string for the serializer. "myint" and
+  "mystring" are repectively the field names associated with the first and
+  second parameter.
 - someint is an integer.
 - somestring is a char pointer.
 

trunk/Documentation/networking/00-INDEX

@@ -4,8 +4,6 @@
 	- information on the 3Com EtherLink Plus (3c505) driver.
 6pack.txt
 	- info on the 6pack protocol, an alternative to KISS for AX.25
-Configurable
-	- info on some of the configurable network parameters
 DLINK.txt
 	- info on the D-Link DE-600/DE-620 parallel port pocket adapters
 PLIP.txt
@@ -26,8 +24,6 @@ baycom.txt
 	- info on the driver for Baycom style amateur radio modems
 bridge.txt
 	- where to get user space programs for ethernet bridging with Linux.
-comx.txt
-	- info on drivers for COMX line of synchronous serial adapters.
 cops.txt
 	- info on the COPS LocalTalk Linux driver
 cs89x0.txt
@@ -78,20 +74,14 @@ ltpc.txt
 	- the Apple or Farallon LocalTalk PC card driver
 multicast.txt
 	- Behaviour of cards under Multicast
-ncsa-telnet
-	- notes on how NCSA telnet (DOS) breaks with MTU discovery enabled.
 netdevices.txt
 	- info on network device driver functions exported to the kernel.
 olympic.txt
 	- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
 policy-routing.txt
 	- IP policy-based routing
-pt.txt
-	- the Gracilis Packetwin AX.25 device driver
 ray_cs.txt
 	- Raylink Wireless LAN card driver info.
-routing.txt
-	- the new routing mechanism
 shaper.txt
 	- info on the module that can shape/limit transmitted traffic.
 sk98lin.txt

trunk/Documentation/networking/3c505.txt

@@ -14,8 +14,7 @@ If no base address is given at boot time, the driver will autoprobe
 ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver
 will try to probe for it.
 
-The driver can be used as a loadable module.  See net-modules.txt for details
-of the parameters it can take.  
+The driver can be used as a loadable module.
 
 Theoretically, one instance of the driver can now run multiple cards,
 in the standard way (when loading a module, say "modprobe 3c505