---

yaml
---
r: 347815
b: refs/heads/master
c: c4d6d8d
h: refs/heads/master
i:
  347813: 661d638
  347811: 32ddee8
  347807: d0fe0ec
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b911a6bdeef5848c468597d040e3407e0aee04ce
+refs/heads/master: c4d6d8dbf335c7fa47341654a37c53a512b519bb

trunk/Documentation/filesystems/Locking

@@ -80,6 +80,7 @@ rename:		yes (all)	(see below)
 readlink:	no
 follow_link:	no
 put_link:	no
+truncate:	yes		(see below)
 setattr:	yes
 permission:	no (may not block if called in rcu-walk mode)
 get_acl:	no
@@ -95,6 +96,11 @@ atomic_open:	yes
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
 victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
+	->truncate() is never called directly - it's a callback, not a
+method. It's called by vmtruncate() - deprecated library function used by
+->setattr(). Locking information above applies to that call (i.e. is
+inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been
+passed).
 
 See Documentation/filesystems/directory-locking for more detailed discussion
 of the locking scheme for directory operations.

trunk/Documentation/filesystems/porting

@@ -281,7 +281,7 @@ ext2_write_failed and callers for an example.
 
 [mandatory]
 
-	->truncate is gone.  The whole truncate sequence needs to be
+	->truncate is going away.  The whole truncate sequence needs to be
 implemented in ->setattr, which is now mandatory for filesystems
 implementing on-disk size changes.  Start with a copy of the old inode_setattr
 and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to

trunk/Documentation/filesystems/vfs.txt

@@ -350,6 +350,7 @@ struct inode_operations {
 	int (*readlink) (struct dentry *, char __user *,int);
         void * (*follow_link) (struct dentry *, struct nameidata *);
         void (*put_link) (struct dentry *, struct nameidata *, void *);
+	void (*truncate) (struct inode *);
 	int (*permission) (struct inode *, int);
 	int (*get_acl)(struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
@@ -430,6 +431,16 @@ otherwise noted.
   	started might not be in the page cache at the end of the
   	walk).
 
+  truncate: Deprecated. This will not be called if ->setsize is defined.
+	Called by the VFS to change the size of a file.  The
+ 	i_size field of the inode is set to the desired size by the
+ 	VFS before this method is called.  This method is called by
+ 	the truncate(2) system call and related functionality.
+
+	Note: ->truncate and vmtruncate are deprecated. Do not add new
+	instances/calls of these. Filesystems should be converted to do their
+	truncate sequence via ->setattr().
+
   permission: called by the VFS to check for access rights on a POSIX-like
   	filesystem.
 

trunk/Documentation/hwmon/it87

@@ -209,3 +209,13 @@ doesn't use CPU cycles.
 Trip points must be set properly before switching to automatic fan speed
 control mode. The driver will perform basic integrity checks before
 actually switching to automatic control mode.
+
+
+Temperature offset attributes
+-----------------------------
+
+The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
+temperature for thermal diodes or diode-connected thermal transistors.
+If a temperature sensor is configured for thermistors, the attribute values
+are ignored. If the thermal sensor type is Intel PECI, the temperature offset
+must be programmed to the critical CPU temperature.

trunk/arch/arm/boot/dts/Makefile

@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
+	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
 	omap4-var-som.dtb \
 	omap4-sdp.dtb \
@@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
-dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \
-	sun5i-olinuxino.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+	sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \

trunk/arch/arm/boot/dts/at91sam9263.dtsi

@@ -368,14 +368,14 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
 				interrupts = <16 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fff9c000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <17 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			macb0: ethernet@fffbc000 {

trunk/arch/arm/boot/dts/at91sam9g45.dtsi

@@ -425,14 +425,14 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <16 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fffa0000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
 				interrupts = <17 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			adc0: adc@fffb0000 {

trunk/arch/arm/boot/dts/at91sam9x5.dtsi

@@ -92,7 +92,7 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 4 5>;
-				status = "disable";
+				status = "disabled";
 			};
 
 			tcb0: timer@f8008000 {

trunk/arch/arm/boot/dts/imx27-3ds.dts

@@ -21,17 +21,17 @@
 	};
 
 	soc {
-		aipi@10000000 { /* aipi */
-
+		aipi@10000000 { /* aipi1 */
 			uart1: serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
+		};
 
-			fec@1002b000 {
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
 				status = "okay";
 			};
 		};
 	};
-
 };

trunk/arch/arm/boot/dts/imx27-phytec-phycore.dts

@@ -21,8 +21,7 @@
 	};
 
 	soc {
-		aipi@10000000 { /* aipi */
-
+		aipi@10000000 { /* aipi1 */
 			serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
@@ -38,10 +37,6 @@
 				status = "okay";
 			};
 
-			ethernet@1002b000 {
-				status = "okay";
-			};
-
 			i2c@1001d000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -60,6 +55,12 @@
 				};
 			};
 		};
+
+		aipi@10020000 { /* aipi2 */
+			ethernet@1002b000 {
+				status = "okay";
+			};
+		};
 	};
 
 	nor_flash@c0000000 {

trunk/arch/arm/boot/dts/imx27.dtsi

@@ -55,7 +55,7 @@
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10000000 0x10000000>;
+			reg = <0x10000000 0x20000>;
 			ranges;
 
 			wdog: wdog@10002000 {
@@ -211,6 +211,15 @@
 				status = "disabled";
 			};
 
+		};
+
+		aipi@10020000 { /* AIPI2 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10020000 0x20000>;
+			ranges;
+
 			fec: ethernet@1002b000 {
 				compatible = "fsl,imx27-fec";
 				reg = <0x1002b000 0x4000>;

trunk/arch/arm/boot/dts/omap2420-h4.dts

@@ -15,6 +15,6 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x84000000>; /* 64 MB */
+		reg = <0x80000000 0x4000000>; /* 64 MB */
 	};
 };

trunk/arch/arm/boot/dts/sun4i-cubieboard.dts

@@ -11,11 +11,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i.dtsi"
+/include/ "sun4i-a10.dtsi"
 
 / {
 	model = "Cubietech Cubieboard";
-	compatible = "cubietech,cubieboard", "allwinner,sun4i";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
 
 	aliases {
 		serial0 = &uart0;

trunk/arch/arm/boot/dts/sun5i-olinuxino.dts

@@ -12,11 +12,11 @@
  */
 
 /dts-v1/;
-/include/ "sun5i.dtsi"
+/include/ "sun5i-a13.dtsi"
 
 / {
 	model = "Olimex A13-Olinuxino";
-	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
 
 	chosen {
 		bootargs = "earlyprintk console=ttyS0,115200";

trunk/arch/arm/mach-davinci/board-da850-evm.c

@@ -41,6 +41,7 @@
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/mux.h>
+#include <mach/sram.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

trunk/arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	int i;
-
-	for (i = 0; i < 1000; i++) {
-		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
+	/* Transmit fifo not full?  */
+	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
+		;
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }

trunk/arch/arm/mach-exynos/common.h

@@ -25,7 +25,7 @@ void exynos_init_late(void);
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else
-static int exynos_pm_late_initcall(void) { return 0; }
+static inline int exynos_pm_late_initcall(void) { return 0; }
 #endif
 
 #ifdef CONFIG_ARCH_EXYNOS4

trunk/arch/arm/mach-imx/clk-imx51-imx53.c

@@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 			unsigned long rate_ckih1, unsigned long rate_ckih2)
 {
 	int i;
+	u32 val;
 	struct device_node *np;
 
 	clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
@@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable_unprepare(clk[iim_gate]);
 
+	/*
+	 * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
+	 * longer supported. Set to one for better power saving.
+	 *
+	 * The effect of not setting these bits is that MIPI clocks can't be
+	 * enabled without the IPU clock being enabled aswell.
+	 */
+	val = readl(MXC_CCM_CCDR);
+	val |= 1 << 18;
+	writel(val, MXC_CCM_CCDR);
+
+	val = readl(MXC_CCM_CLPCR);
+	val |= 1 << 23;
+	writel(val, MXC_CCM_CLPCR);
+
 	return 0;
 }
 

trunk/arch/arm/plat-mxc/devices/platform-mx2-emma.c → trunk/arch/arm/mach-imx/devices/platform-mx2-emma.c

@@ -6,8 +6,8 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
 
 #define imx_mx2_emmaprp_data_entry_single(soc)				\
 	{								\

trunk/arch/arm/mach-omap2/Kconfig

@@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC
 
 config SOC_HAS_REALTIME_COUNTER
 	bool "Real time free running counter"
+	depends on SOC_OMAP5
+	default y
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
@@ -79,7 +81,6 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_SMP
-	select SOC_HAS_REALTIME_COUNTER
 	select COMMON_CLK
 
 comment "OMAP Core Type"

trunk/arch/arm/mach-omap2/board-3430sdp.c

@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device sdp3430_dvi_device = {

trunk/arch/arm/mach-omap2/board-am3517evm.c

@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device am3517_evm_dvi_device = {

trunk/arch/arm/mach-omap2/board-cm-t35.c

@@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= CM_T35_DVI_EN_GPIO,
+	.i2c_bus_num		= -1,
 };
 
 static struct omap_dss_device cm_t35_dvi_device = {

trunk/arch/arm/mach-omap2/board-devkit8000.c

@@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
 
 static struct tfp410_platform_data dvi_panel = {
 	.power_down_gpio	= -1,
+	.i2c_bus_num		= 1,
 };
 
 static struct omap_dss_device devkit8000_dvi_device = {