---

yaml --- r: 328741 b: refs/heads/master c: 8376869 h: refs/heads/master i: 328739: d26a1b4 v: v3
git-mirror · Sep 24, 2012 · 0c8df6e · 0c8df6e
1 parent d579c10
commit 0c8df6e
Show file tree

Hide file tree

Showing 574 changed files with 3,081 additions and 6,212 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 057d51a1268fe4be039db8ff0791fcfcb63a4f1b
+refs/heads/master: 8376869e51f5094e87229aa6200c43ada85c9aaf
diff --git a/trunk/Documentation/ABI/testing/sysfs-bus-pci b/trunk/Documentation/ABI/testing/sysfs-bus-pci
@@ -210,15 +210,3 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
-
-What:		/sys/bus/pci/devices/.../d3cold_allowed
-Date:		July 2012
-Contact:	Huang Ying <ying.huang@intel.com>
-Description:
-		d3cold_allowed is bit to control whether the corresponding PCI
-		device can be put into D3Cold state.  If it is cleared, the
-		device will never be put into D3Cold state.  If it is set, the
-		device may be put into D3Cold state if other requirements are
-		satisfied too.  Reading this attribute will show the current
-		value of d3cold_allowed bit.  Writing this attribute will set
-		the value of d3cold_allowed bit.
diff --git a/trunk/Documentation/ABI/testing/sysfs-devices-system-cpu b/trunk/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -176,14 +176,3 @@ Description:	Disable L3 cache indices
 		All AMD processors with L3 caches provide this functionality.
 		For details, see BKDGs at
 		http://developer.amd.com/documentation/guides/Pages/default.aspx
-
-
-What:		/sys/devices/system/cpu/cpufreq/boost
-Date:		August 2012
-Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-Description:	Processor frequency boosting control
-
-		This switch controls the boost setting for the whole system.
-		Boosting allows the CPU and the firmware to run at a frequency
-		beyound it's nominal limit.
-		More details can be found in Documentation/cpu-freq/boost.txt
diff --git a/trunk/Documentation/cpu-freq/boost.txt b/trunk/Documentation/cpu-freq/boost.txt
diff --git a/trunk/Documentation/cpuidle/sysfs.txt b/trunk/Documentation/cpuidle/sysfs.txt
@@ -76,17 +76,9 @@ total 0
 
 
 * desc : Small description about the idle state (string)
-* disable : Option to disable this idle state (bool) -> see note below
+* disable : Option to disable this idle state (bool)
 * latency : Latency to exit out of this idle state (in microseconds)
 * name : Name of the idle state (string)
 * power : Power consumed while in this idle state (in milliwatts)
 * time : Total time spent in this idle state (in microseconds)
 * usage : Number of times this state was entered (count)
-
-Note:
-The behavior and the effect of the disable variable depends on the
-implementation of a particular governor. In the ladder governor, for
-example, it is not coherent, i.e. if one is disabling a light state,
-then all deeper states are disabled as well, but the disable variable
-does not reflect it. Likewise, if one enables a deep state but a lighter
-state still is disabled, then this has no effect.
diff --git a/trunk/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/trunk/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
diff --git a/trunk/Documentation/devicetree/bindings/power/opp.txt b/trunk/Documentation/devicetree/bindings/power/opp.txt
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.8
+When:	3.7
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

diff --git a/trunk/Documentation/i2c/busses/i2c-i801 b/trunk/Documentation/i2c/busses/i2c-i801
@@ -21,7 +21,6 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
-  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -3388,7 +3388,7 @@ M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.pengutronix.de/git/wsa/linux.git
+T:	git git://git.fluff.org/bjdooks/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc4
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

diff --git a/trunk/arch/arm/Kconfig.debug b/trunk/arch/arm/Kconfig.debug
@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I/O"
+		bool "Kernel low-level debug output via semihosting I"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC call. The host debugger or emulator must have
+		  simple SVC calls. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as well as
+		  This is known to work with OpenOCD, as wellas
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 

diff --git a/trunk/arch/arm/Makefile b/trunk/arch/arm/Makefile
@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb: scripts
+%.dtb:
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs: scripts
+dtbs:
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

diff --git a/trunk/arch/arm/boot/compressed/head.S b/trunk/arch/arm/boot/compressed/head.S
@@ -659,14 +659,10 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
-		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
-		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
-		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register

diff --git a/trunk/arch/arm/boot/dts/at91sam9g25ek.dts b/trunk/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

diff --git a/trunk/arch/arm/configs/armadillo800eva_defconfig b/trunk/arch/arm/configs/armadillo800eva_defconfig
@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

diff --git a/trunk/arch/arm/include/asm/assembler.h b/trunk/arch/arm/include/asm/assembler.h
@@ -320,12 +320,4 @@
 	.size \name , . - \name
 	.endm
 
-	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
-#ifndef CONFIG_CPU_USE_DOMAINS
-	adds	\tmp, \addr, #\size - 1
-	sbcccs	\tmp, \tmp, \limit
-	bcs	\bad
-#endif
-	.endm
-
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/trunk/arch/arm/include/asm/dma-mapping.h b/trunk/arch/arm/include/asm/dma-mapping.h
@@ -202,13 +202,6 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
-/*
- * This can be called during early boot to increase the size of the atomic
- * coherent DMA pool above the default value of 256KiB. It must be called
- * before postcore_initcall.
- */
-extern void __init init_dma_coherent_pool_size(unsigned long size);
-
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

diff --git a/trunk/arch/arm/include/asm/memory.h b/trunk/arch/arm/include/asm/memory.h
@@ -187,7 +187,6 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
-#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -197,8 +196,6 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
-#ifndef __ASSEMBLY__
-
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.