---

yaml
---
r: 15728
b: refs/heads/master
c: c8ebd3a
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 638cbac8de9b57345a9446e107b6aebc10b58970
+refs/heads/master: c8ebd3a37f0e7a2aae337279d58a50c1a1fcd053

trunk/CREDITS

@@ -1097,7 +1097,7 @@ S: 80050-430 - Curitiba - Paran
 S: Brazil
 
 N: Kumar Gala
-E: galak@kernel.crashing.org
+E: kumar.gala@freescale.com
 D: Embedded PowerPC 6xx/7xx/74xx/82xx/83xx/85xx support
 S: Austin, Texas 78729
 S: USA

trunk/Documentation/DocBook/Makefile

@@ -20,12 +20,6 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 #                        +--> DIR=file  (htmldocs)
 #                        +--> man/      (mandocs)
 
-
-# for PDF and PS output you can choose between xmlto and docbook-utils tools
-PDF_METHOD	= $(prefer-db2x)
-PS_METHOD	= $(prefer-db2x)
-
-
 ###
 # The targets that may be used.
 .PHONY:	xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
@@ -99,39 +93,27 @@ C-procfs-example = procfs_example.xml
 C-procfs-example2 = $(addprefix $(obj)/,$(C-procfs-example))
 $(obj)/procfs-guide.xml: $(C-procfs-example2)
 
-notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
-		   exit 1
-db2xtemplate = db2TYPE -o $(dir $@) $<
-xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $<
-
-# determine which methods are available
-ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found)
-	use-db2x = db2x
-	prefer-db2x = db2x
-else
-	use-db2x = notfound
-	prefer-db2x = $(use-xmlto)
-endif
-ifeq ($(shell which xmlto >/dev/null 2>&1 && echo found),found)
-	use-xmlto = xmlto
-	prefer-xmlto = xmlto
-else
-	use-xmlto = notfound
-	prefer-xmlto = $(use-db2x)
-endif
+###
+# Rules to generate postscript, PDF and HTML
+# db2html creates a directory. Generate a html file used for timestamp
 
-# the commands, generated from the chosen template
-quiet_cmd_db2ps = PS      $@
-      cmd_db2ps = $(subst TYPE,ps, $($(PS_METHOD)template))
+quiet_cmd_db2ps = XMLTO    $@
+      cmd_db2ps = xmlto ps $(XMLTOFLAGS) -o $(dir $@) $<
 %.ps : %.xml
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
+	  exit 1)
 	$(call cmd,db2ps)
 
-quiet_cmd_db2pdf = PDF      $@
-      cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template))
+quiet_cmd_db2pdf = XMLTO   $@
+      cmd_db2pdf = xmlto pdf $(XMLTOFLAGS) -o $(dir $@) $<
 %.pdf : %.xml
+	@(which xmlto > /dev/null 2>&1) || \
+	 (echo "*** You need to install xmlto ***"; \
+	  exit 1)
 	$(call cmd,db2pdf)
 
-quiet_cmd_db2html = HTML   $@
+quiet_cmd_db2html = XMLTO  $@
       cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
 		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
          Goto $(patsubst %.html,%,$(notdir $@))</a><p>' > $@
@@ -145,7 +127,7 @@ quiet_cmd_db2html = HTML   $@
 	@if [ ! -z "$(PNG-$(basename $(notdir $@)))" ]; then \
             cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
 
-quiet_cmd_db2man = MAN     $@
+quiet_cmd_db2man = XMLTO   $@
       cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
 %.9 : %.xml
 	@(which xmlto > /dev/null 2>&1) || \

trunk/Documentation/DocBook/kernel-api.tmpl

@@ -68,7 +68,9 @@ X!Iinclude/linux/kobject.h
 
      <sect1><title>Kernel utility functions</title>
 !Iinclude/linux/kernel.h
-!Ekernel/printk.c
+<!-- This needs to clean up to make kernel-doc happy
+X!Ekernel/printk.c
+ -->
 !Ekernel/panic.c
 !Ekernel/sys.c
 !Ekernel/rcupdate.c
@@ -386,7 +388,7 @@ X!Edrivers/pnp/system.c
 
   <chapter id="blkdev">
      <title>Block Devices</title>
-!Eblock/ll_rw_blk.c
+!Edrivers/block/ll_rw_blk.c
   </chapter>
 
   <chapter id="miscdev">

trunk/Documentation/DocBook/stylesheet.xsl

@@ -3,5 +3,4 @@
 <param name="chunk.quietly">1</param>
 <param name="funcsynopsis.style">ansi</param>
 <param name="funcsynopsis.tabular.threshold">80</param>
-<!-- <param name="paper.type">A4</param> -->
 </stylesheet>

trunk/Documentation/atomic_ops.txt

@@ -115,33 +115,6 @@ boolean is return which indicates whether the resulting counter value
 is negative.  It requires explicit memory barrier semantics around the
 operation.
 
-Then:
-
-	int atomic_cmpxchg(atomic_t *v, int old, int new);
-
-This performs an atomic compare exchange operation on the atomic value v,
-with the given old and new values. Like all atomic_xxx operations,
-atomic_cmpxchg will only satisfy its atomicity semantics as long as all
-other accesses of *v are performed through atomic_xxx operations.
-
-atomic_cmpxchg requires explicit memory barriers around the operation.
-
-The semantics for atomic_cmpxchg are the same as those defined for 'cas'
-below.
-
-Finally:
-
-	int atomic_add_unless(atomic_t *v, int a, int u);
-
-If the atomic value v is not equal to u, this function adds a to v, and
-returns non zero. If v is equal to u then it returns zero. This is done as
-an atomic operation.
-
-atomic_add_unless requires explicit memory barriers around the operation.
-
-atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0)
-
-
 If a caller requires memory barrier semantics around an atomic_t
 operation which does not return a value, a set of interfaces are
 defined which accomplish this:

trunk/Documentation/block/biodoc.txt

@@ -1063,8 +1063,8 @@ Aside:
 4.4 I/O contexts
 I/O contexts provide a dynamically allocated per process data area. They may
 be used in I/O schedulers, and in the block layer (could be used for IO statis,
-priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c
-for an example of usage in an i/o scheduler.
+priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and
+as-iosched.c for an example of usage in an i/o scheduler.
 
 
 5. Scalability related changes

trunk/Documentation/devices.txt

@@ -2903,14 +2903,14 @@ Your cooperation is appreciated.
 		196 = /dev/dvb/adapter3/video0    first video decoder of fourth card
 
 
-216 char	Bluetooth RFCOMM TTY devices
-		  0 = /dev/rfcomm0		First Bluetooth RFCOMM TTY device
-		  1 = /dev/rfcomm1		Second Bluetooth RFCOMM TTY device
+216 char	USB BlueTooth devices
+		  0 = /dev/ttyUB0		First USB BlueTooth device
+		  1 = /dev/ttyUB1		Second USB BlueTooth device
 		    ...
 
-217 char	Bluetooth RFCOMM TTY devices (alternate devices)
-		  0 = /dev/curf0		Callout device for rfcomm0
-		  1 = /dev/curf1		Callout device for rfcomm1
+217 char	USB BlueTooth devices (alternate devices)
+		  0 = /dev/cuub0		Callout device for ttyUB0
+		  1 = /dev/cuub1		Callout device for ttyUB1
 		    ...
 
 218 char	The Logical Company bus Unibus/Qbus adapters

trunk/Documentation/feature-removal-schedule.txt

@@ -140,22 +140,3 @@ What:	EXPORT_SYMBOL(lookup_hash)
 When:	January 2006
 Why:	Too low-level interface.  Use lookup_one_len or lookup_create instead.
 Who:	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
-What:	START_ARRAY ioctl for md
-When:	July 2006
-Files:	drivers/md/md.c
-Why:	Not reliable by design - can fail when most needed.
-	Alternatives exist
-Who:	NeilBrown <neilb@suse.de>
-
----------------------------
-
-What:	au1x00_uart driver
-When:	January 2006
-Why:	The 8250 serial driver now has the ability to deal with the differences
-	between the standard 8250 family of UARTs and their slightly strange
-	brother on Alchemy SOCs.  The loss of features is not considered an
-	issue.
-Who:	Ralf Baechle <ralf@linux-mips.org>

trunk/Documentation/oops-tracing.txt

@@ -30,12 +30,7 @@ the disk is not available then you have three options :-
 
 (1) Hand copy the text from the screen and type it in after the machine
     has restarted.  Messy but it is the only option if you have not
-    planned for a crash. Alternatively, you can take a picture of
-    the screen with a digital camera - not nice, but better than
-    nothing.  If the messages scroll off the top of the console, you
-    may find that booting with a higher resolution (eg, vga=791)
-    will allow you to read more of the text. (Caveat: This needs vesafb,
-    so won't help for 'early' oopses)
+    planned for a crash.
 
 (2) Boot with a serial console (see Documentation/serial-console.txt),
     run a null modem to a second machine and capture the output there

trunk/Documentation/usb/bluetooth.txt

@@ -0,0 +1,44 @@
+INTRODUCTION
+
+  The USB Bluetooth driver supports any USB Bluetooth device.
+  It currently works well with the Linux USB Bluetooth stack from Axis 
+  (available at http://developer.axis.com/software/bluetooth/ ) and 
+  has been rumored to work with other Linux USB Bluetooth stacks.
+
+
+CONFIGURATION
+
+  Currently the driver can handle up to 256 different USB Bluetooth 
+  devices at once. 
+
+  If you are not using devfs:
+    The major number that the driver uses is 216 so to use the driver,
+    create the following nodes:
+	mknod /dev/ttyUB0 c 216 0
+	mknod /dev/ttyUB1 c 216 1
+	mknod /dev/ttyUB2 c 216 2
+	mknod /dev/ttyUB3 c 216 3
+		.
+		.
+		.
+	mknod /dev/ttyUB254 c 216 254
+	mknod /dev/ttyUB255 c 216 255
+
+  If you are using devfs:
+    The devices supported by this driver will show up as
+    /dev/usb/ttub/{0,1,...}
+
+  When the device is connected and recognized by the driver, the driver
+  will print to the system log, which node the device has been bound to.
+
+
+CONTACT:
+
+  If anyone has any problems using this driver, please contact me, or 
+  join the Linux-USB mailing list (information on joining the mailing 
+  list, as well as a link to its searchable archive is at 
+  http://www.linux-usb.org/ )
+
+
+Greg Kroah-Hartman
+greg@kroah.com

trunk/Documentation/video4linux/CARDLIST.bttv

@@ -140,4 +140,3 @@
 139 -> Prolink PixelView PlayTV MPEG2 PV-M4900
 140 -> Osprey 440                                          [0070:ff07]
 141 -> Asound Skyeye PCTV
-142 -> Sabrent TV-FM (bttv version)

trunk/Documentation/video4linux/CARDLIST.saa7134

@@ -80,5 +80,3 @@
  79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
  80 -> ASUS Digimatrix TV                       [1043:0210]
  81 -> Philips Tiger reference design           [1131:2018]
- 82 -> MSI TV@Anywhere plus                     [1462:6231]
-

trunk/Documentation/video4linux/CARDLIST.tuner

@@ -67,4 +67,3 @@ tuner=65 - Ymec TVF66T5-B/DFF
 tuner=66 - LG NTSC (TALN mini series)
 tuner=67 - Philips TD1316 Hybrid Tuner
 tuner=68 - Philips TUV1236D ATSC/NTSC dual in
-tuner=69 - Tena TNF 5335 MF

trunk/Documentation/x86_64/boot-options.txt

@@ -7,12 +7,10 @@ Machine check
 
    mce=off disable machine check
    mce=bootlog Enable logging of machine checks left over from booting.
-               Disabled by default on AMD because some BIOS leave bogus ones.
+               Disabled by default because some BIOS leave bogus ones.
                If your BIOS doesn't do that it's a good idea to enable though
                to make sure you log even machine check events that result
-               in a reboot. On Intel systems it is enabled by default.
-   mce=nobootlog
-		Disable boot machine check logging.
+               in a reboot.
    mce=tolerancelevel (number)
 		0: always panic, 1: panic if deadlock possible,
 		2: try to avoid panic, 3: never panic or exit (for testing)
@@ -124,9 +122,6 @@ SMP
 
   cpumask=MASK   only use cpus with bits set in mask
 
-  additional_cpus=NUM Allow NUM more CPUs for hotplug
-		 (defaults are specified by the BIOS or half the available CPUs)
-
 NUMA
 
   numa=off	Only set up a single NUMA node spanning all memory.
@@ -193,9 +188,6 @@ Debugging
 
   kstack=N   Print that many words from the kernel stack in oops dumps.
 
-  pagefaulttrace Dump all page faults. Only useful for extreme debugging
-		and will create a lot of output.
-
 Misc
 
   noreplacement  Don't replace instructions with more appropiate ones

trunk/Documentation/x86_64/mm.txt

@@ -6,18 +6,14 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47bits) user space, different per mm
 hole caused by [48:63] sign extension
 ffff800000000000 - ffff80ffffffffff (=40bits) guard hole
-ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of all phys. memory
+ffff810000000000 - ffffc0ffffffffff (=46bits) direct mapping of phys. memory
 ffffc10000000000 - ffffc1ffffffffff (=40bits) hole
 ffffc20000000000 - ffffe1ffffffffff (=45bits) vmalloc/ioremap space
 ... unused hole ...
 ffffffff80000000 - ffffffff82800000 (=40MB)   kernel text mapping, from phys 0
 ... unused hole ...
 ffffffff88000000 - fffffffffff00000 (=1919MB) module mapping space
 
-The direct mapping covers all memory in the system upto the highest
-memory address (this means in some cases it can also include PCI memory
-holes)
-
 vmalloc space is lazily synchronized into the different PML4 pages of
 the processes using the page fault handler, with init_level4_pgt as
 reference.

trunk/MAINTAINERS

@@ -1565,7 +1565,7 @@ S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 P:     Kumar Gala
-M:     galak@kernel.crashing.org
+M:     kumar.gala@freescale.com
 W:     http://www.penguinppc.org/
 L:     linuxppc-embedded@ozlabs.org
 S:     Maintained
@@ -1873,16 +1873,6 @@ L:	linux-tr@linuxtr.net
 W:	http://www.linuxtr.net
 S:	Maintained
 
-OMNIKEY CARDMAN 4000 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
-S:	Maintained
-
-OMNIKEY CARDMAN 4040 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
-S:	Maintained
-
 ONSTREAM SCSI TAPE DRIVER
 P:	Willem Riede
 M:	osst@riede.org

trunk/Makefile

@@ -1193,17 +1193,6 @@ else
 __srctree = $(srctree)/
 endif
 
-ifeq ($(ALLSOURCE_ARCHS),)
-ifeq ($(ARCH),um)
-ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
-else
-ALLINCLUDE_ARCHS := $(ARCH)
-endif
-else
-#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
-ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
-endif
-
 ALLSOURCE_ARCHS := $(ARCH)
 
 define all-sources
@@ -1219,7 +1208,7 @@ define all-sources
 	  find $(__srctree)include $(RCS_FIND_IGNORE) \
 	       \( -name config -o -name 'asm-*' \) -prune \
 	       -o -name '*.[chS]' -print; \
-	  for ARCH in $(ALLINCLUDE_ARCHS) ; do \
+	  for ARCH in $(ALLSOURCE_ARCHS) ; do \
 	       find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
 	            -name '*.[chS]' -print; \
 	  done ; \

trunk/README

@@ -81,11 +81,6 @@ INSTALLING the kernel:
    failed patches (xxx# or xxx.rej). If there are, either you or me has
    made a mistake.
 
-   Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
-   (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 2.6.x kernel.  Please read
-   Documentation/applying-patches.txt for more information.
-
    Alternatively, the script patch-kernel can be used to automate this
    process.  It determines the current kernel version and applies any
    patches found.