---

yaml
---
r: 313431
b: refs/heads/master
c: 31a985f
h: refs/heads/master
i:
  313429: 9234c4b
  313427: f493cc7
  313423: 3b10a01
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a44fccbc18889676fa3f6b44319ca55b32646284
+refs/heads/master: 31a985f5bdc7e0708fc2cf02fac06c74664a7910

trunk/Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -47,3 +47,6 @@ Boards:
 
 - AM335X EVM : Software Developement Board for AM335x
   compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
+
+- OMAP5 EVM : Evaluation Module
+  compatible = "ti,omap5-evm", "ti,omap5"

trunk/arch/arm/Kconfig

@@ -1595,6 +1595,7 @@ config ARCH_NR_GPIO
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 355 if ARCH_U8500
 	default 264 if MACH_H4700
+	default 512 if SOC_OMAP5
 	default 0
 	help
 	  Maximum number of GPIOs in the system.

trunk/arch/arm/boot/dts/omap5-evm.dts

@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap5.dtsi"
+
+/ {
+	model = "TI OMAP5 EVM board";
+	compatible = "ti,omap5-evm", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};

trunk/arch/arm/boot/dts/omap5.dtsi

@@ -0,0 +1,184 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+		};
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is uses for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since that will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+		gic: interrupt-controller@48211000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x48211000 0x1000>,
+			      <0x48212000 0x1000>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap5-uart";
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap6-uart";
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+		};
+	};
+};

trunk/arch/arm/configs/omap2plus_defconfig

@@ -236,3 +236,4 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
+CONFIG_SOC_OMAP5=y

trunk/arch/arm/mach-omap1/board-ams-delta.c

@@ -37,12 +37,12 @@
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
 #include <mach/camera.h>
+#include <mach/usb.h>
 
 #include "iomap.h"
 #include "common.h"

trunk/arch/arm/mach-omap1/board-generic.c

@@ -23,8 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/board.h>
+
+#include <mach/usb.h>
+
 #include "common.h"
 
 /* assume no Mini-AB port */

trunk/arch/arm/mach-omap1/board-h2.c

@@ -40,11 +40,11 @@
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>
-#include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/flash.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 #include "board-h2.h"

trunk/arch/arm/mach-omap1/board-h3.c

@@ -40,13 +40,13 @@
 
 #include <plat/mux.h>
 #include <plat/tc.h>
-#include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
 #include <plat/flash.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/usb.h>
 
 #include "common.h"
 #include "board-h3.h"

trunk/arch/arm/mach-omap1/board-htcherald.c

@@ -44,10 +44,10 @@
 #include <plat/omap7xx.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include <plat/usb.h>
 #include <plat/mmc.h>
 
 #include <mach/irqs.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

trunk/arch/arm/mach-omap1/board-innovator.c

@@ -35,11 +35,11 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/tc.h>
-#include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/mmc.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "iomap.h"
 #include "common.h"

trunk/arch/arm/mach-omap1/board-nokia770.c

@@ -26,14 +26,14 @@
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

trunk/arch/arm/mach-omap1/board-osk.c

@@ -45,11 +45,11 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

trunk/arch/arm/mach-omap1/board-palmte.c

@@ -35,14 +35,14 @@
 
 #include <plat/flash.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

trunk/arch/arm/mach-omap1/board-palmtt.c

@@ -35,14 +35,14 @@
 #include <plat/led.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"
 

trunk/arch/arm/mach-omap1/board-palmz71.c

@@ -37,14 +37,14 @@
 
 #include <plat/flash.h>
 #include <plat/mux.h>
-#include <plat/usb.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
 
 #include <mach/hardware.h>
+#include <mach/usb.h>
 
 #include "common.h"