Skip to content

Commit

Permalink
Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/…
Browse files Browse the repository at this point in the history 
…git/galak/powerpc

* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits)
  [POWERPC] 85xx: Added needed MPC85xx PCI device IDs
  [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs
  [POWERPC] 85xxCDS: MPC8548 DTS cleanup.
  [POWERPC] 85xxCDS: Misc 8548 PCI Corrections.
  [POWERPC] 85xxCDS: Delay 8259 cascade hookup.
  [POWERPC] 85xxCDS: Make sure restart resets the PCI bus.
  [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line.
  [POWERPC] FSL: Add support for PCI-X controllers
  [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
  [POWERPC] Provide ability to setup P2P bridge registers from struct resource
  [POWERPC] Add basic PCI/PCI Express support for 8544DS board
  [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
  [POWERPC] Removed setup_indirect_pci_nomap
  [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS
  [POWERPC] 85xx: Added 8568 PCIe support
  [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
  [POWERPC] Add basic PCI node for mpc8568mds board
  [POWERPC] Use Freescale pci/pcie common code for 85xx boards
  [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree
  [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node
  ...
  • Loading branch information
Linus Torvalds committed Jul 25, 2007
2 parents 3836df6 + e587121 commit 0de085b
Show file tree
Hide file tree
Showing 45 changed files with 1,660 additions and 840 deletions.
9 changes: 4 additions & 5 deletions arch/powerpc/Kconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -411,11 +411,6 @@ config PPC_INDIRECT_PCI
default y if 40x || 44x
default n

config PPC_INDIRECT_PCI_BE
bool
depends PPC_INDIRECT_PCI
default n

config EISA
bool

Expand All @@ -425,6 +420,10 @@ config SBUS
config FSL_SOC
bool

config FSL_PCI
bool
select PPC_INDIRECT_PCI

# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
Expand Down
2 changes: 1 addition & 1 deletion arch/powerpc/boot/dts/mpc8313erdb.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -178,7 +178,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
2 changes: 1 addition & 1 deletion arch/powerpc/boot/dts/mpc832x_mds.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -154,7 +154,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
2 changes: 1 addition & 1 deletion arch/powerpc/boot/dts/mpc832x_rdb.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -123,7 +123,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
4 changes: 2 additions & 2 deletions arch/powerpc/boot/dts/mpc8349emitx.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -197,7 +197,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand All @@ -222,7 +222,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8600 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
2 changes: 1 addition & 1 deletion arch/powerpc/boot/dts/mpc8349emitxgp.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -154,7 +154,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8600 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
4 changes: 2 additions & 2 deletions arch/powerpc/boot/dts/mpc834x_mds.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -241,7 +241,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down Expand Up @@ -301,7 +301,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8600 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
2 changes: 1 addition & 1 deletion arch/powerpc/boot/dts/mpc836x_mds.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -169,7 +169,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8500 100>;
compatible = "83xx";
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};

Expand Down
2 changes: 1 addition & 1 deletion arch/powerpc/boot/dts/mpc8540ads.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -258,7 +258,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "85xx";
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};

Expand Down
4 changes: 2 additions & 2 deletions arch/powerpc/boot/dts/mpc8541cds.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -193,7 +193,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "85xx";
compatible = "fsl,mpc8540-pci";
device_type = "pci";

i8259@19000 {
Expand Down Expand Up @@ -230,7 +230,7 @@
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
compatible = "85xx";
compatible = "fsl,mpc8540-pci";
device_type = "pci";
};

Expand Down
211 changes: 211 additions & 0 deletions arch/powerpc/boot/dts/mpc8544ds.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -137,6 +137,217 @@
interrupt-parent = <&mpic>;
};

pci@8000 {
compatible = "fsl,mpc8540-pci";
device_type = "pci";
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <

/* IDSEL 0x11 J17 Slot 1 */
8800 0 0 1 &mpic 2 1
8800 0 0 2 &mpic 3 1
8800 0 0 3 &mpic 4 1
8800 0 0 4 &mpic 1 1

/* IDSEL 0x12 J16 Slot 2 */

9000 0 0 1 &mpic 3 1
9000 0 0 2 &mpic 4 1
9000 0 0 3 &mpic 2 1
9000 0 0 4 &mpic 1 1>;

interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 ff>;
ranges = <02000000 0 80000000 80000000 0 10000000
01000000 0 00000000 e2000000 0 00800000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
};

pcie@9000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 90000000 90000000 0 10000000
01000000 0 00000000 e3000000 0 00800000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 4 1
0000 0 0 2 &mpic 5 1
0000 0 0 3 &mpic 6 1
0000 0 0 4 &mpic 7 1
>;
};

pcie@a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <a000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 e2800000 0 00800000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 0 1
0000 0 0 2 &mpic 1 1
0000 0 0 3 &mpic 2 1
0000 0 0 4 &mpic 3 1
>;
};

pcie@b000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <b000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
01000000 0 00000000 e3800000 0 00800000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <

// IDSEL 0x1a
d000 0 0 1 &i8259 6 2
d000 0 0 2 &i8259 3 2
d000 0 0 3 &i8259 4 2
d000 0 0 4 &i8259 5 2

// IDSEL 0x1b
d800 0 0 1 &i8259 5 2
d800 0 0 2 &i8259 0 0
d800 0 0 3 &i8259 0 0
d800 0 0 4 &i8259 0 0

// IDSEL 0x1c USB
e000 0 0 1 &i8259 9 2
e000 0 0 2 &i8259 a 2
e000 0 0 3 &i8259 c 2
e000 0 0 4 &i8259 7 2

// IDSEL 0x1d Audio
e800 0 0 1 &i8259 9 2
e800 0 0 2 &i8259 a 2
e800 0 0 3 &i8259 b 2
e800 0 0 4 &i8259 0 0

// IDSEL 0x1e Legacy
f000 0 0 1 &i8259 c 2
f000 0 0 2 &i8259 0 0
f000 0 0 3 &i8259 0 0
f000 0 0 4 &i8259 0 0

// IDSEL 0x1f IDE/SATA
f800 0 0 1 &i8259 6 2
f800 0 0 2 &i8259 0 0
f800 0 0 3 &i8259 0 0
f800 0 0 4 &i8259 0 0
>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <02000000 0 b0000000
02000000 0 b0000000
0 10000000
01000000 0 00000000
01000000 0 00000000
0 00080000>;

pci_bridge@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <02000000 0 b0000000
02000000 0 b0000000
0 20000000
01000000 0 00000000
01000000 0 00000000
0 00100000>;

isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <f000 0 0 0 0>;
ranges = <1 0 01000000 0 0
00001000>;
interrupt-parent = <&i8259>;

i8259: interrupt-controller@20 {
reg = <1 20 2
1 a0 2
1 4d0 2>;
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
built-in;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent =
<&mpic>;
};

i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <1 60 1 1 64 1>;
interrupts = <1 3 c 3>;
interrupt-parent =
<&i8259>;

keyboard@0 {
reg = <0>;
compatible = "pnpPNP,303";
};

mouse@1 {
reg = <1>;
compatible = "pnpPNP,f03";
};
};

rtc@70 {
compatible =
"pnpPNP,b00";
reg = <1 70 2>;
};

gpio@400 {
reg = <1 400 80>;
};
};
};
};

};

mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
Expand Down
Loading

0 comments on commit 0de085b

Please sign in to comment.