---

yaml --- r: 352641 b: refs/heads/master c: aa5a1b8 h: refs/heads/master i: 352639: 958d861 v: v3
git-mirror · Feb 5, 2013 · 0e7c34f · 0e7c34f
1 parent 3153de9
commit 0e7c34f
Show file tree

Hide file tree

Showing 274 changed files with 3,980 additions and 31,964 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8457703f1e86aaf0f134402dd1e09e1f13e65222
+refs/heads/master: aa5a1b8e68c95151fd249a3b5ec444c6b0aa2f1c
diff --git a/trunk/arch/arm/mach-omap2/board-omap3evm.c b/trunk/arch/arm/mach-omap2/board-omap3evm.c
@@ -309,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.gpio_wp	= 63,
 		.deferred	= true,
 	},
-#ifdef CONFIG_WILINK_PLATFORM_DATA
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
 	{
 		.name		= "wl1271",
 		.mmc		= 2,
@@ -450,7 +450,7 @@ static struct regulator_init_data omap3evm_vio = {
 	.consumer_supplies	= omap3evm_vio_supply,
 };
 
-#ifdef CONFIG_WILINK_PLATFORM_DATA
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
 
 #define OMAP3EVM_WLAN_PMENA_GPIO	(150)
 #define OMAP3EVM_WLAN_IRQ_GPIO		(149)
@@ -563,7 +563,7 @@ static struct omap_board_mux omap35x_board_mux[] __initdata = {
 				OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(GPMC_WAIT2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
 				OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 
@@ -601,7 +601,7 @@ static struct omap_board_mux omap36x_board_mux[] __initdata = {
 	OMAP3_MUX(SYS_BOOT4, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(SYS_BOOT5, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
 	OMAP3_MUX(SYS_BOOT6, OMAP_MUX_MODE3 | OMAP_PIN_OFF_NONE),
-#ifdef CONFIG_WILINK_PLATFORM_DATA
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
 	/* WLAN IRQ - GPIO 149 */
 	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 
@@ -637,7 +637,7 @@ static struct gpio omap3_evm_ehci_gpios[] __initdata = {
 
 static void __init omap3_evm_wl12xx_init(void)
 {
-#ifdef CONFIG_WILINK_PLATFORM_DATA
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
 	int ret;
 
 	/* WL12xx WLAN Init */

diff --git a/trunk/drivers/bcma/bcma_private.h b/trunk/drivers/bcma/bcma_private.h
@@ -47,7 +47,6 @@ int bcma_sprom_get(struct bcma_bus *bus);
 /* driver_chipcommon.c */
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
-extern struct platform_device bcma_pflash_dev;
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
 
 /* driver_chipcommon_pmu.c */

diff --git a/trunk/drivers/bcma/driver_chipcommon_nflash.c b/trunk/drivers/bcma/driver_chipcommon_nflash.c
@@ -5,11 +5,11 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
-#include "bcma_private.h"
-
 #include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
 
+#include "bcma_private.h"
+
 struct platform_device bcma_nflash_dev = {
 	.name		= "bcma_nflash",
 	.num_resources	= 0,

diff --git a/trunk/drivers/bcma/driver_chipcommon_sflash.c b/trunk/drivers/bcma/driver_chipcommon_sflash.c
@@ -5,11 +5,11 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
-#include "bcma_private.h"
-
 #include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
 
+#include "bcma_private.h"
+
 static struct resource bcma_sflash_resource = {
 	.name	= "bcma_sflash",
 	.start	= BCMA_SOC_FLASH2,

diff --git a/trunk/drivers/bcma/driver_gpio.c b/trunk/drivers/bcma/driver_gpio.c
@@ -73,16 +73,6 @@ static void bcma_gpio_free(struct gpio_chip *chip, unsigned gpio)
 	bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
 }
 
-static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
-	struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
-
-	if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
-		return bcma_core_irq(cc->core);
-	else
-		return -EINVAL;
-}
-
 int bcma_gpio_init(struct bcma_drv_cc *cc)
 {
 	struct gpio_chip *chip = &cc->gpio;
@@ -95,7 +85,6 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 	chip->set		= bcma_gpio_set_value;
 	chip->direction_input	= bcma_gpio_direction_input;
 	chip->direction_output	= bcma_gpio_direction_output;
-	chip->to_irq		= bcma_gpio_to_irq;
 	chip->ngpio		= 16;
 	/* There is just one SoC in one device and its GPIO addresses should be
 	 * deterministic to address them more easily. The other buses could get

diff --git a/trunk/drivers/bcma/driver_mips.c b/trunk/drivers/bcma/driver_mips.c
@@ -14,33 +14,11 @@
 
 #include <linux/bcma/bcma.h>
 
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 #include <linux/time.h>
 
-static const char *part_probes[] = { "bcm47xxpart", NULL };
-
-static struct physmap_flash_data bcma_pflash_data = {
-	.part_probe_types	= part_probes,
-};
-
-static struct resource bcma_pflash_resource = {
-	.name	= "bcma_pflash",
-	.flags  = IORESOURCE_MEM,
-};
-
-struct platform_device bcma_pflash_dev = {
-	.name		= "physmap-flash",
-	.dev		= {
-		.platform_data  = &bcma_pflash_data,
-	},
-	.resource	= &bcma_pflash_resource,
-	.num_resources	= 1,
-};
-
 /* The 47162a0 hangs when reading MIPS DMP registers registers */
 static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
 {
@@ -233,7 +211,6 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
 {
 	struct bcma_bus *bus = mcore->core->bus;
 	struct bcma_drv_cc *cc = &bus->drv_cc;
-	struct bcma_pflash *pflash = &cc->pflash;
 
 	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
 	case BCMA_CC_FLASHT_STSER:
@@ -243,20 +220,15 @@ static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
 		break;
 	case BCMA_CC_FLASHT_PARA:
 		bcma_debug(bus, "Found parallel flash\n");
-		pflash->present = true;
-		pflash->window = BCMA_SOC_FLASH2;
-		pflash->window_size = BCMA_SOC_FLASH2_SZ;
+		cc->pflash.present = true;
+		cc->pflash.window = BCMA_SOC_FLASH2;
+		cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
 
 		if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
 		     BCMA_CC_FLASH_CFG_DS) == 0)
-			pflash->buswidth = 1;
+			cc->pflash.buswidth = 1;
 		else
-			pflash->buswidth = 2;
-
-		bcma_pflash_data.width = pflash->buswidth;
-		bcma_pflash_resource.start = pflash->window;
-		bcma_pflash_resource.end = pflash->window + pflash->window_size;
-
+			cc->pflash.buswidth = 2;
 		break;
 	default:
 		bcma_err(bus, "Flash type not supported\n");

diff --git a/trunk/drivers/bcma/main.c b/trunk/drivers/bcma/main.c
@@ -149,14 +149,6 @@ static int bcma_register_cores(struct bcma_bus *bus)
 		dev_id++;
 	}
 
-#ifdef CONFIG_BCMA_DRIVER_MIPS
-	if (bus->drv_cc.pflash.present) {
-		err = platform_device_register(&bcma_pflash_dev);
-		if (err)
-			bcma_err(bus, "Error registering parallel flash\n");
-	}
-#endif
-
 #ifdef CONFIG_BCMA_SFLASH
 	if (bus->drv_cc.sflash.present) {
 		err = platform_device_register(&bcma_sflash_dev);

diff --git a/trunk/drivers/net/wireless/ath/ath5k/phy.c b/trunk/drivers/net/wireless/ath/ath5k/phy.c
@@ -1613,10 +1613,6 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
 	ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
 
 	ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
-	if (WARN_ON(ee_mode < 0)) {
-		ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
-		return;
-	}
 
 	/* completed NF calibration, test threshold */
 	nf = ath5k_hw_read_measured_noise_floor(ah);

diff --git a/trunk/drivers/net/wireless/ath/ath5k/reset.c b/trunk/drivers/net/wireless/ath/ath5k/reset.c
@@ -985,8 +985,6 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 		return;
 
 	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (WARN_ON(ee_mode < 0))
-		return;
 
 	/* Adjust power delta for channel 14 */
 	if (channel->center_freq == 2484)

diff --git a/trunk/drivers/net/wireless/ath/ath6kl/cfg80211.c b/trunk/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1778,14 +1778,14 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev,
 
 	if (vif->target_stats.rx_byte) {
 		sinfo->rx_bytes = vif->target_stats.rx_byte;
-		sinfo->filled |= STATION_INFO_RX_BYTES64;
+		sinfo->filled |= STATION_INFO_RX_BYTES;
 		sinfo->rx_packets = vif->target_stats.rx_pkt;
 		sinfo->filled |= STATION_INFO_RX_PACKETS;
 	}
 
 	if (vif->target_stats.tx_byte) {
 		sinfo->tx_bytes = vif->target_stats.tx_byte;
-		sinfo->filled |= STATION_INFO_TX_BYTES64;
+		sinfo->filled |= STATION_INFO_TX_BYTES;
 		sinfo->tx_packets = vif->target_stats.tx_pkt;
 		sinfo->filled |= STATION_INFO_TX_PACKETS;
 	}

diff --git a/trunk/drivers/net/wireless/ath/ath9k/Kconfig b/trunk/drivers/net/wireless/ath/ath9k/Kconfig
@@ -58,7 +58,6 @@ config ATH9K_DEBUGFS
 	bool "Atheros ath9k debugging"
 	depends on ATH9K
 	select MAC80211_DEBUGFS
-	select RELAY
 	---help---
 	  Say Y, if you need access to ath9k's statistics for
 	  interrupts, rate control, etc.

diff --git a/trunk/drivers/net/wireless/ath/ath9k/ath9k.h b/trunk/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -319,8 +319,6 @@ struct ath_rx {
 	struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX];
 
 	struct sk_buff *frag;
-
-	u32 ampdu_ref;
 };
 
 int ath_startrecv(struct ath_softc *sc);
@@ -389,7 +387,6 @@ struct ath_beacon_config {
 	u16 bmiss_timeout;
 	u8 dtim_count;
 	bool enable_beacon;
-	bool ibss_creator;
 };
 
 struct ath_beacon {
@@ -757,7 +754,6 @@ struct ath_softc {
 	/* relay(fs) channel for spectral scan */
 	struct rchan *rfs_chan_spec_scan;
 	enum spectral_mode spectral_mode;
-	struct ath_spec_scan spec_config;
 	int scanning;
 
 #ifdef CONFIG_PM_SLEEP
@@ -867,31 +863,31 @@ static inline u8 spectral_bitmap_weight(u8 *bins)
  * interface.
  */
 enum ath_fft_sample_type {
-	ATH_FFT_SAMPLE_HT20 = 1,
+	ATH_FFT_SAMPLE_HT20 = 0,
 };
 
 struct fft_sample_tlv {
 	u8 type;	/* see ath_fft_sample */
-	__be16 length;
+	u16 length;
 	/* type dependent data follows */
 } __packed;
 
 struct fft_sample_ht20 {
 	struct fft_sample_tlv tlv;
 
-	u8 max_exp;
+	u8 __alignment;
 
-	__be16 freq;
+	u16 freq;
 	s8 rssi;
 	s8 noise;
 
-	__be16 max_magnitude;
+	u16 max_magnitude;
 	u8 max_index;
 	u8 bitmap_weight;
 
-	__be64 tsf;
+	u64 tsf;
 
-	u8 data[SPECTRAL_HT20_NUM_BINS];
+	u16 data[SPECTRAL_HT20_NUM_BINS];
 } __packed;
 
 void ath9k_tasklet(unsigned long data);