---

yaml
---
r: 180743
b: refs/heads/master
c: f7072e0
h: refs/heads/master
i:
  180741: c8b199a
  180739: 414eeeb
  180735: fe63ced
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6c42966768b0254f465a8f451333795283f53d22
+refs/heads/master: f7072e00f0868ff5184d29706905c4a9eca3608e

trunk/.gitignore

@@ -22,6 +22,7 @@
 *.lst
 *.symtypes
 *.order
+modules.builtin
 *.elf
 *.bin
 *.gz
@@ -36,6 +37,7 @@
 tags
 TAGS
 vmlinux
+vmlinuz
 System.map
 Module.markers
 Module.symvers
@@ -45,14 +47,8 @@ Module.symvers
 #
 # Generated include files
 #
-include/asm
-include/asm-*/asm-offsets.h
 include/config
-include/linux/autoconf.h
-include/linux/compile.h
 include/linux/version.h
-include/linux/utsrelease.h
-include/linux/bounds.h
 include/generated
 
 # stgit generated dirs

trunk/Documentation/ABI/stable/sysfs-driver-qla2xxx

@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date:		September 2009
+Contact:	QLogic Linux Driver <linux-driver@qlogic.com>
+Description:	qla2xxx-udev.sh currently looks for uevent CHANGE events to
+		signal a firmware-dump has been generated by the driver and is
+		ready for retrieval.
+Users:		qla2xxx-udev.sh.  Proposed changes should be mailed to
+		linux-driver@qlogic.com

trunk/Documentation/ABI/testing/ima_policy

@@ -20,7 +20,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@ Description:
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=INODE_PERM mask=MAY_READ uid=0
+			measure func=FILE_CHECK mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in inode_permission.
+		open for read by root in do_filp_open.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@ Description:
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
-			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=INODE_PERM mask=MAY_READ
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ

trunk/Documentation/ABI/testing/procfs-diskstats

@@ -8,7 +8,7 @@ Description:
 		 1 - major number
 		 2 - minor mumber
 		 3 - device name
-		 4 - reads completed succesfully
+		 4 - reads completed successfully
 		 5 - reads merged
 		 6 - sectors read
 		 7 - time spent reading (ms)

trunk/Documentation/ABI/testing/sysfs-block

@@ -4,7 +4,7 @@ Contact:	Jerome Marchand <jmarchan@redhat.com>
 Description:
 		The /sys/block/<disk>/stat files displays the I/O
 		statistics of disk <disk>. They contain 11 fields:
-		 1 - reads completed succesfully
+		 1 - reads completed successfully
 		 2 - reads merged
 		 3 - sectors read
 		 4 - time spent reading (ms)

trunk/Documentation/ABI/testing/sysfs-bus-usb

@@ -21,25 +21,27 @@ Contact:	Alan Stern <stern@rowland.harvard.edu>
 Description:
 		Each USB device directory will contain a file named
 		power/level.  This file holds a power-level setting for
-		the device, one of "on", "auto", or "suspend".
+		the device, either "on" or "auto".
 
 		"on" means that the device is not allowed to autosuspend,
 		although normal suspends for system sleep will still
 		be honored.  "auto" means the device will autosuspend
 		and autoresume in the usual manner, according to the
-		capabilities of its driver.  "suspend" means the device
-		is forced into a suspended state and it will not autoresume
-		in response to I/O requests.  However remote-wakeup requests
-		from the device may still be enabled (the remote-wakeup
-		setting is controlled separately by the power/wakeup
-		attribute).
+		capabilities of its driver.
 
 		During normal use, devices should be left in the "auto"
-		level.  The other levels are meant for administrative uses.
+		level.  The "on" level is meant for administrative uses.
 		If you want to suspend a device immediately but leave it
 		free to wake up in response to I/O requests, you should
 		write "0" to power/autosuspend.
 
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
 What:		/sys/bus/usb/devices/.../power/persist
 Date:		May 2007
 KernelVersion:	2.6.23
@@ -144,3 +146,16 @@ Description:
 
 		Write a 1 to force the device to disconnect
 		(equivalent to unplugging a wired USB device).
+
+What:		/sys/bus/usb/drivers/.../remove_id
+Date:		November 2009
+Contact:	CHENG Renquan <rqcheng@smu.edu.sg>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		idVendor idProduct.	After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id

trunk/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc

@@ -23,3 +23,16 @@ Description:
                 Since this relates to security (specifically, the
                 lifetime of PTKs and GTKs) it should not be changed
                 from the default.
+
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
+Date:           August 2009
+KernelVersion:  2.6.32
+Contact:        David Vrabel <david.vrabel@csr.com>
+Description:
+                The maximum PHY rate to use for all connected devices.
+                This is only of limited use for testing and
+                development as the hardware's automatic rate
+                adaptation is better then this simple control.
+
+                Refer to [ECMA-368] section 10.3.1.1 for the value to
+                use.

trunk/Documentation/ABI/testing/sysfs-devices-memory

@@ -60,6 +60,19 @@ Description:
 Users:		hotplug memory remove tools
 		https://w3.opensource.ibm.com/projects/powerpc-utils/
 
+
+What:		/sys/devices/system/memoryX/nodeY
+Date:		October 2009
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, a symbolic link that
+		points to the corresponding NUMA node directory.
+
+		For example, the following symbolic link is created for
+		memory section 9 on node0:
+		/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
+
 What:		/sys/devices/system/node/nodeX/memoryY
 Date:		September 2008
 Contact:	Gary Hade <garyhade@us.ibm.com>
@@ -70,4 +83,3 @@ Description:
 		memory section directory.  For example, the following symbolic
 		link is created for memory section 9 on node0.
 		/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
-

trunk/Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -62,6 +62,35 @@ Description:	CPU topology files that describe kernel limits related to
 		See Documentation/cputopology.txt for more information.
 
 
+What:		/sys/devices/system/cpu/probe
+		/sys/devices/system/cpu/release
+Date:		November 2009
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Dynamic addition and removal of CPU's.  This is not hotplug
+		removal, this is meant complete removal/addition of the CPU
+		from the system.
+
+		probe: writes to this file will dynamically add a CPU to the
+		system.  Information written to the file to add CPU's is
+		architecture specific.
+
+		release: writes to this file dynamically remove a CPU from
+		the system.  Information writtento the file to remove CPU's
+		is architecture specific.
+
+What:		/sys/devices/system/cpu/cpu#/node
+Date:		October 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Discover NUMA node a CPU belongs to
+
+		When CONFIG_NUMA is enabled, a symbolic link that points
+		to the corresponding NUMA node directory.
+
+		For example, the following symlink is created for cpu42
+		in NUMA node 2:
+
+		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
 
 What:		/sys/devices/system/cpu/cpu#/node
 Date:		October 2009
@@ -136,6 +165,24 @@ Description:	Discover cpuidle policy and mechanism
 		See files in Documentation/cpuidle/ for more information.
 
 
+What:		/sys/devices/system/cpu/cpu#/cpufreq/*
+Date:		pre-git history
+Contact:	cpufreq@vger.kernel.org
+Description:	Discover and change clock speed of CPUs
+
+		Clock scaling allows you to change the clock speed of the
+		CPUs on the fly. This is a nice method to save battery
+		power, because the lower the clock speed, the less power
+		the CPU consumes.
+
+		There are many knobs to tweak in this directory.
+
+		See files in Documentation/cpu-freq/ for more information.
+
+		In particular, read Documentation/cpu-freq/user-guide.txt
+		to learn how to control the knobs.
+
+
 What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
 Date:      August 2008
 KernelVersion:	2.6.27