---

yaml
---
r: 362823
b: refs/heads/master
c: d0b8883
h: refs/heads/master
i:
  362821: 46b8e2a
  362819: 218408c
  362815: 8026b17
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1c21351b722c9101bacdb961f5b5711669c882a0
+refs/heads/master: d0b8883800c913f5cc0eb273c052bcac94ad44d8

trunk/Documentation/kernel-parameters.txt

@@ -596,16 +596,33 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			is selected automatically. Check
 			Documentation/kdump/kdump.txt for further details.
 
-	crashkernel_low=size[KMG]
-			[KNL, x86] parts under 4G.
-
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for an example.
 
+	crashkernel=size[KMG],high
+			[KNL, x86_64] range could be above 4G. Allow kernel
+			to allocate physical memory region from top, so could
+			be above 4G if system have more than 4G ram installed.
+			Otherwise memory region will be allocated below 4G, if
+			available.
+			It will be ignored if crashkernel=X is specified.
+	crashkernel=size[KMG],low
+			[KNL, x86_64] range under 4G. When crashkernel=X,high
+			is passed, kernel could allocate physical memory region
+			above 4G, that cause second kernel crash on system
+			that require some amount of low memory, e.g. swiotlb
+			requires at least 64M+32K low memory.  Kernel would
+			try to allocate 72M below 4G automatically.
+			This one let user to specify own low range under 4G
+			for second kernel instead.
+			0: to disable low allocation.
+			It will be ignored when crashkernel=X,high is not used
+			or memory reserved is below 4G.
+
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
+	efi_no_storage_paranoia [EFI; X86]
+			Using this parameter you can use more than 50% of
+			your efi variable storage. Use this parameter only if
+			you are really sure that your UEFI does sane gc and
+			fulfills the spec otherwise your board may brick.
+
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
@@ -513,7 +513,8 @@ ifeq ($(KBUILD_EXTMOD),)
 # Carefully list dependencies so we do not try to build scripts twice
 # in parallel
 PHONY += scripts
-scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
+	 asm-generic
 	$(Q)$(MAKE) $(build)=$(@)
 
 # Objects we will link into vmlinux / subdirs we need to visit

trunk/arch/arm/include/asm/glue-cache.h

@@ -19,14 +19,6 @@
 #undef _CACHE
 #undef MULTI_CACHE
 
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v3
-# endif
-#endif
-
 #if defined(CONFIG_CPU_CACHE_V4)
 # ifdef _CACHE
 #  define MULTI_CACHE 1

trunk/arch/arm/include/asm/hardware/iop3xx.h

@@ -37,7 +37,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX processor registers
  */
 #define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfeffe000
+#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfedfe000
 #define IOP3XX_PERIPHERAL_SIZE		0x00002000
 #define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
 					IOP3XX_PERIPHERAL_SIZE - 1)

trunk/arch/arm/include/asm/pgtable-3level.h

@@ -111,7 +111,7 @@
 #define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
 #define L_PTE_S2_MT_WRITEBACK	 (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
 #define L_PTE_S2_RDONLY		 (_AT(pteval_t, 1) << 6)   /* HAP[1]   */
-#define L_PTE_S2_RDWR		 (_AT(pteval_t, 2) << 6)   /* HAP[2:1] */
+#define L_PTE_S2_RDWR		 (_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
 
 /*
  * Hyp-mode PL2 PTE definitions for LPAE.

trunk/arch/arm/include/asm/tlbflush.h

@@ -14,15 +14,13 @@
 
 #include <asm/glue.h>
 
-#define TLB_V3_PAGE	(1 << 0)
 #define TLB_V4_U_PAGE	(1 << 1)
 #define TLB_V4_D_PAGE	(1 << 2)
 #define TLB_V4_I_PAGE	(1 << 3)
 #define TLB_V6_U_PAGE	(1 << 4)
 #define TLB_V6_D_PAGE	(1 << 5)
 #define TLB_V6_I_PAGE	(1 << 6)
 
-#define TLB_V3_FULL	(1 << 8)
 #define TLB_V4_U_FULL	(1 << 9)
 #define TLB_V4_D_FULL	(1 << 10)
 #define TLB_V4_I_FULL	(1 << 11)
@@ -52,7 +50,6 @@
  *	=============
  *
  *	We have the following to choose from:
- *	  v3    - ARMv3
  *	  v4    - ARMv4 without write buffer
  *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
  *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
@@ -330,7 +327,6 @@ static inline void local_flush_tlb_all(void)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
 	tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero);
 	tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero);
 	tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero);
@@ -351,9 +347,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
+	if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
 		if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
-			tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
 			tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
 			tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
 			tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
@@ -385,9 +380,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
+	if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
 	    cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-		tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr);
 		tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr);
 		tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr);
 		tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr);
@@ -418,7 +412,6 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr);
 	tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr);
 	tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr);
 	tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr);

trunk/arch/arm/kernel/hw_breakpoint.c

@@ -1043,7 +1043,7 @@ static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = {
+static struct notifier_block dbg_cpu_pm_nb = {
 	.notifier_call = dbg_cpu_pm_notify,
 };
 

trunk/arch/arm/kernel/perf_event.c

@@ -253,7 +253,10 @@ validate_event(struct pmu_hw_events *hw_events,
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	struct pmu *leader_pmu = event->group_leader->pmu;
 
-	if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
+	if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
+		return 1;
+
+	if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
 		return 1;
 
 	return armpmu->get_event_idx(hw_events, event) >= 0;

trunk/arch/arm/kernel/sched_clock.c

@@ -45,12 +45,12 @@ static u32 notrace jiffy_sched_clock_read(void)
 
 static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
 
-static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
 {
 	return (cyc * mult) >> shift;
 }
 
-static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
+static unsigned long long notrace cyc_to_sched_clock(u32 cyc, u32 mask)
 {
 	u64 epoch_ns;
 	u32 epoch_cyc;

trunk/arch/arm/kernel/setup.c

@@ -56,7 +56,6 @@
 #include <asm/virt.h>
 
 #include "atags.h"
-#include "tcm.h"
 
 
 #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
@@ -798,8 +797,6 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_crashkernel();
 
-	tcm_init();
-
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif

trunk/arch/arm/kernel/tcm.c

@@ -17,7 +17,6 @@
 #include <asm/mach/map.h>
 #include <asm/memory.h>
 #include <asm/system_info.h>
-#include "tcm.h"
 
 static struct gen_pool *tcm_pool;
 static bool dtcm_present;

trunk/arch/arm/kvm/arm.c

@@ -201,6 +201,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 		break;
 	case KVM_CAP_ARM_SET_DEVICE_ADDR:
 		r = 1;
+		break;
 	case KVM_CAP_NR_VCPUS:
 		r = num_online_cpus();
 		break;

trunk/arch/arm/kvm/coproc.c

@@ -79,11 +79,11 @@ static bool access_dcsw(struct kvm_vcpu *vcpu,
 	u32 val;
 	int cpu;
 
-	cpu = get_cpu();
-
 	if (!p->is_write)
 		return read_from_write_only(vcpu, p);
 
+	cpu = get_cpu();
+
 	cpumask_setall(&vcpu->arch.require_dcache_flush);
 	cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush);
 

trunk/arch/arm/mach-highbank/hotplug.c

@@ -28,13 +28,11 @@ extern void secondary_startup(void);
  */
 void __ref highbank_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
-
 	highbank_set_cpu_jump(cpu, phys_to_virt(0));
-	highbank_set_core_pwr();
 
-	cpu_do_idle();
+	flush_cache_louis();
+	highbank_set_core_pwr();
 
-	/* We should never return from idle */
-	panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+	while (1)
+		cpu_do_idle();
 }

trunk/arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2714,16 +2714,22 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
 	{ }
 };
 
-static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
-	{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
-};
-
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
 	.class		= &omap44xx_ocp2scp_hwmod_class,
 	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "func_48m_fclk",
+	/*
+	 * ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP
+	 * block as an "optional clock," and normally should never be
+	 * specified as the main_clk for an OMAP IP block.  However it
+	 * turns out that this clock is actually the main clock for
+	 * the ocp2scp_usb_phy IP block:
+	 * http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html
+	 * So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems
+	 * to be the best workaround.
+	 */
+	.main_clk	= "ocp2scp_usb_phy_phy_48m",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
@@ -2732,8 +2738,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 		},
 	},
 	.dev_attr	= ocp2scp_dev_attr,
-	.opt_clks	= ocp2scp_usb_phy_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*

trunk/arch/arm/mm/Kconfig

@@ -43,7 +43,7 @@ config CPU_ARM740T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_CACHE_V3	# although the core is v4t
+	select CPU_CACHE_V4
 	select CPU_CP15_MPU
 	select CPU_PABRT_LEGACY
 	help
@@ -469,9 +469,6 @@ config CPU_PABRT_V7
 	bool
 
 # The cache model
-config CPU_CACHE_V3
-	bool
-
 config CPU_CACHE_V4
 	bool
 

trunk/arch/arm/mm/Makefile

@@ -33,7 +33,6 @@ obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
 obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
 obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
 
-obj-$(CONFIG_CPU_CACHE_V3)	+= cache-v3.o
 obj-$(CONFIG_CPU_CACHE_V4)	+= cache-v4.o
 obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
 obj-$(CONFIG_CPU_CACHE_V4WB)	+= cache-v4wb.o

trunk/arch/arm/mm/cache-feroceon-l2.c

@@ -343,6 +343,7 @@ void __init feroceon_l2_init(int __l2_wt_override)
 	outer_cache.inv_range = feroceon_l2_inv_range;
 	outer_cache.clean_range = feroceon_l2_clean_range;
 	outer_cache.flush_range = feroceon_l2_flush_range;
+	outer_cache.inv_all = l2_inv_all;
 
 	enable_l2();