---

yaml
---
r: 232343
b: refs/heads/master
c: 5e82ea9
h: refs/heads/master
i:
  232341: 8270343
  232339: 89b8c7c
  232335: 10e192b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: abb72c828878a2c69b2cfb33ac30007c8ecd735e
+refs/heads/master: 5e82ea99827f6aa122fbb08f8659e76226ce107b

trunk/arch/arm/mach-omap1/Kconfig

@@ -9,6 +9,7 @@ config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
 	select CPU_ARM926T
+	select OMAP_MPU_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
@@ -22,6 +23,7 @@ config ARCH_OMAP15XX
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
+	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1

trunk/arch/arm/mach-omap1/Makefile

@@ -3,12 +3,11 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management

trunk/arch/arm/mach-omap1/time.c

@@ -44,16 +44,21 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
+#include <asm/sched_clock.h>
+
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 #include <plat/common.h>
 
+#ifdef CONFIG_OMAP_MPU_TIMER
+
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
@@ -67,7 +72,7 @@ typedef struct {
 ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
-static inline unsigned long omap_mpu_timer_read(int nr)
+static inline unsigned long notrace omap_mpu_timer_read(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 	return timer->read_tim;
@@ -212,24 +217,46 @@ static struct clocksource clocksource_mpu = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+
+static inline unsigned long long notrace _omap_mpu_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+#ifndef CONFIG_OMAP_32K_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#else
+static unsigned long long notrace omap_mpu_sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#endif
+
+static void notrace mpu_update_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static void __init omap_init_clocksource(unsigned long rate)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
 	omap_mpu_timer_start(1, ~0, 1);
+	init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
 
 	if (clocksource_register_hz(&clocksource_mpu, rate))
 		printk(err, clocksource_mpu.name);
 }
 
-/*
- * ---------------------------------------------------------------------------
- * Timer initialization
- * ---------------------------------------------------------------------------
- */
-static void __init omap_timer_init(void)
+static void __init omap_mpu_timer_init(void)
 {
 	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
 	unsigned long	rate;
@@ -246,6 +273,66 @@ static void __init omap_timer_init(void)
 	omap_init_clocksource(rate);
 }
 
+#else
+static inline void omap_mpu_timer_init(void)
+{
+	pr_err("Bogus timer, should not happen\n");
+}
+#endif	/* CONFIG_OMAP_MPU_TIMER */
+
+#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
+static unsigned long long (*preferred_sched_clock)(void);
+
+unsigned long long notrace sched_clock(void)
+{
+	if (!preferred_sched_clock)
+		return 0;
+
+	return preferred_sched_clock();
+}
+
+static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
+{
+	if (use_32k_sched_clock)
+		preferred_sched_clock = omap_32k_sched_clock;
+	else
+		preferred_sched_clock = omap_mpu_sched_clock;
+}
+#else
+static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
+{
+}
+#endif
+
+static inline int omap_32k_timer_usable(void)
+{
+	int res = false;
+
+	if (cpu_is_omap730() || cpu_is_omap15xx())
+		return res;
+
+#ifdef CONFIG_OMAP_32K_TIMER
+	res = omap_32k_timer_init();
+#endif
+
+	return res;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static void __init omap_timer_init(void)
+{
+	if (omap_32k_timer_usable()) {
+		preferred_sched_clock_init(1);
+	} else {
+		omap_mpu_timer_init();
+		preferred_sched_clock_init(0);
+	}
+}
+
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
 };

trunk/arch/arm/mach-omap1/timer32k.c

@@ -52,10 +52,9 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <plat/common.h>
 #include <plat/dmtimer.h>
 
-struct sys_timer omap_timer;
-
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer
@@ -181,14 +180,14 @@ static __init void omap_init_32k_timer(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap_timer_init(void)
+bool __init omap_32k_timer_init(void)
 {
+	omap_init_clocksource_32k();
+
 #ifdef CONFIG_OMAP_DM_TIMER
 	omap_dm_timer_init();
 #endif
 	omap_init_32k_timer();
-}
 
-struct sys_timer omap_timer = {
-	.init		= omap_timer_init,
-};
+	return true;
+}

trunk/arch/arm/mach-omap2/board-cm-t3517.c

@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 #define RTC_IO_GPIO		(153)
 #define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(160)
+#define RTC_RD_GPIO		(53)
 #define RTC_CS_GPIO		(163)
+#define RTC_CS_EN_GPIO		(160)
 
 struct v3020_platform_data cm_t3517_v3020_pdata = {
 	.use_gpio	= 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
 
 static void __init cm_t3517_init_rtc(void)
 {
+	int err;
+
+	err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+	if (err) {
+		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+		return;
+	}
+
+	gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
 	platform_device_register(&cm_t3517_rtc_device);
 }
 #else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 	},
 	{
 		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
 		.size           = 32 * NAND_BLOCK_SIZE,
 	},
 	{
 		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
 		.size           = MTDPART_SIZ_FULL,
 	},
 };
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
 	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* RTC GPIOs: IO, WR#, RD#, CS# */
+
+	/* RTC GPIOs: */
+	/* IO - GPIO153 */
 	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* WR# - GPIO154 */
 	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* RD# - GPIO53 */
+	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS# - GPIO163 */
 	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS EN - GPIO160 */
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
 	/* HSUSB1 RESET */
 	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* HSUSB2 RESET */

trunk/arch/arm/mach-omap2/board-devkit8000.c

@@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };

trunk/arch/arm/mach-omap2/clock44xx_data.c

@@ -34,7 +34,6 @@
 #include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
-#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
 #include "scrm44xx.h"

trunk/arch/arm/mach-omap2/clockdomain.c

@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
 	if (IS_ERR(cd)) {
 		pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	struct clkdm_dep *cd;
 	u32 mask = 0;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s: %s: not yet implemented\n",
+		       clkdm->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm)
 		return -EINVAL;
 
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
-			  "support is not yet implemented\n");
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
-			  "support is not yet implemented\n");
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_del_autodeps(clkdm);

trunk/arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -30,8 +30,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
 #include "prcm44xx.h"

trunk/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c

@@ -19,7 +19,6 @@
 #include <plat/prcm.h>
 
 #include "powerdomain.h"
-#include "prm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"