Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits)
  sh_mobile_meram: Safely disable MERAM operation when not initialized
  video: mb862xxfb: add support for L1 displaying
  video: mb862xx: add support for controller's I2C bus adapter
  video: mb862xxfb: relocate register space to get contiguous vram
  video: mb862xxfb: use pre-initialized configuration for PCI GDCs
  video: mb862xxfb: correct fix.smem_len field initialization
  video: s3c-fb: correct transparency checking in 32bpp
  video: s3c-fb: add gpio setup function to resume function
  fbdev/amifb: Remove superfluous alignment of frame buffer memory
  fbdev/amifb: Do not call panic() if there's not enough Chip RAM
  fbdev/amifb: Correct check for video memory size
  video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME
  video: s3c-fb: add window variant information for S5P
  video: s3c-fb: add additional validate bpps
  video: s3c-fb: correct window osd size offset values
  udlfb: include prefetch.h explicitly
  drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region
  drivers/video/sm501fb.c: Convert release_resource to release_mem_region
  drivers/video: Convert release_resource to release_mem_region
  video, udlfb: Fix two build warnings about 'ignoring return value'
  ...

arch/arm/mach-omap2/board-3430sdp.c

@@ -37,8 +37,8 @@
 #include <plat/common.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/gpmc-smc91x.h>
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -36,7 +36,7 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include <plat/omap4-keypad.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include "mux.h"
 #include "hsmmc.h"
@@ -680,6 +680,15 @@ static struct omap_dss_device sdp4430_hdmi_device = {
 	.name = "hdmi",
 	.driver_name = "hdmi_panel",
 	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.clocks	= {
+		.dispc	= {
+			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
+		},
+		.hdmi	= {
+			.regn	= 15,
+			.regm2	= 1,
+		},
+	},
 	.platform_enable = sdp4430_panel_enable_hdmi,
 	.platform_disable = sdp4430_panel_disable_hdmi,
 	.channel = OMAP_DSS_CHANNEL_DIGIT,

arch/arm/mach-omap2/board-am3517evm.c

@@ -34,8 +34,8 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include "mux.h"
 #include "control.h"

arch/arm/mach-omap2/board-cm-t35.c

@@ -45,8 +45,8 @@
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -45,8 +45,8 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -31,8 +31,8 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/onenand.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-omap3beagle.c

@@ -41,8 +41,8 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -44,8 +44,8 @@
 #include <plat/usb.h>
 #include <plat/common.h>
 #include <plat/mcspi.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -46,7 +46,7 @@
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 #include <plat/nand.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-omap3stalker.c

@@ -39,8 +39,8 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-omap4panda.c

@@ -34,13 +34,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include "timer-gp.h"
 
 #include "hsmmc.h"

arch/arm/mach-omap2/board-overo.c

@@ -43,8 +43,8 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/display.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-rx51-video.c

@@ -15,7 +15,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mm.h>
 #include <asm/mach-types.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 #include <plat/vram.h>
 #include <plat/mcspi.h>
 

arch/arm/mach-omap2/board-zoom-display.c

@@ -15,7 +15,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/spi/spi.h>
 #include <plat/mcspi.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define LCD_PANEL_RESET_GPIO_PROD	96
 #define LCD_PANEL_RESET_GPIO_PILOT	55

arch/arm/mach-omap2/display.c

@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
@@ -56,37 +56,58 @@ static bool opt_clock_available(const char *clk_role)
 	return false;
 }
 
+struct omap_dss_hwmod_data {
+	const char *oh_name;
+	const char *dev_name;
+	const int id;
+};
+
+static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initdata = {
+	{ "dss_core", "omapdss_dss", -1 },
+	{ "dss_dispc", "omapdss_dispc", -1 },
+	{ "dss_rfbi", "omapdss_rfbi", -1 },
+	{ "dss_venc", "omapdss_venc", -1 },
+};
+
+static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
+	{ "dss_core", "omapdss_dss", -1 },
+	{ "dss_dispc", "omapdss_dispc", -1 },
+	{ "dss_rfbi", "omapdss_rfbi", -1 },
+	{ "dss_venc", "omapdss_venc", -1 },
+	{ "dss_dsi1", "omapdss_dsi1", -1 },
+};
+
+static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
+	{ "dss_core", "omapdss_dss", -1 },
+	{ "dss_dispc", "omapdss_dispc", -1 },
+	{ "dss_rfbi", "omapdss_rfbi", -1 },
+	{ "dss_venc", "omapdss_venc", -1 },
+	{ "dss_dsi1", "omapdss_dsi1", -1 },
+	{ "dss_dsi2", "omapdss_dsi2", -1 },
+	{ "dss_hdmi", "omapdss_hdmi", -1 },
+};
+
 int __init omap_display_init(struct omap_dss_board_info *board_data)
 {
 	int r = 0;
 	struct omap_hwmod *oh;
 	struct omap_device *od;
-	int i;
+	int i, oh_count;
 	struct omap_display_platform_data pdata;
-
-	/*
-	 * omap: valid DSS hwmod names
-	 * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc
-	 * omap3,4: dss_dsi1
-	 * omap4: dss_dsi2, dss_hdmi
-	 */
-	char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc",
-		"dss_dsi1", "dss_dsi2", "dss_hdmi" };
-	char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi",
-		"omapdss_venc", "omapdss_dsi1", "omapdss_dsi2",
-		"omapdss_hdmi" };
-	int oh_count;
+	const struct omap_dss_hwmod_data *curr_dss_hwmod;
 
 	memset(&pdata, 0, sizeof(pdata));
 
-	if (cpu_is_omap24xx())
-		oh_count = ARRAY_SIZE(oh_name) - 3;
-		/* last 3 hwmod dev in oh_name are not available for omap2 */
-	else if (cpu_is_omap44xx())
-		oh_count = ARRAY_SIZE(oh_name);
-	else
-		oh_count = ARRAY_SIZE(oh_name) - 2;
-		/* last 2 hwmod dev in oh_name are not available for omap3 */
+	if (cpu_is_omap24xx()) {
+		curr_dss_hwmod = omap2_dss_hwmod_data;
+		oh_count = ARRAY_SIZE(omap2_dss_hwmod_data);
+	} else if (cpu_is_omap34xx()) {
+		curr_dss_hwmod = omap3_dss_hwmod_data;
+		oh_count = ARRAY_SIZE(omap3_dss_hwmod_data);
+	} else {
+		curr_dss_hwmod = omap4_dss_hwmod_data;
+		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
+	}
 
 	/* opt_clks are always associated with dss hwmod */
 	oh_core = omap_hwmod_lookup("dss_core");
@@ -100,19 +121,21 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 	pdata.opt_clock_available = opt_clock_available;
 
 	for (i = 0; i < oh_count; i++) {
-		oh = omap_hwmod_lookup(oh_name[i]);
+		oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);
 		if (!oh) {
-			pr_err("Could not look up %s\n", oh_name[i]);
+			pr_err("Could not look up %s\n",
+				curr_dss_hwmod[i].oh_name);
 			return -ENODEV;
 		}
 
-		od = omap_device_build(dev_name[i], -1, oh, &pdata,
+		od = omap_device_build(curr_dss_hwmod[i].dev_name,
+				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
 				omap_dss_latency,
 				ARRAY_SIZE(omap_dss_latency), 0);
 
 		if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
-				oh_name[i]))
+				curr_dss_hwmod[i].oh_name))
 			return -ENODEV;
 	}
 	omap_display_device.dev.platform_data = board_data;

arch/arm/mach-omap2/include/mach/board-zoom.h

@@ -1,7 +1,7 @@
 /*
  * Defines for zoom boards
  */
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define ZOOM_NAND_CS    0
 

drivers/media/video/omap/omap_vout.c

@@ -47,7 +47,7 @@
 #include <plat/dma.h>
 #include <plat/vram.h>
 #include <plat/vrfb.h>
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #include "omap_voutlib.h"
 #include "omap_voutdef.h"

drivers/media/video/omap/omap_voutdef.h

@@ -11,7 +11,7 @@
 #ifndef OMAP_VOUTDEF_H
 #define OMAP_VOUTDEF_H
 
-#include <plat/display.h>
+#include <video/omapdss.h>
 
 #define YUYV_BPP        2
 #define RGB565_BPP      2

drivers/video/Kconfig

@@ -1460,6 +1460,14 @@ config FB_S3
 	---help---
 	  Driver for graphics boards with S3 Trio / S3 Virge chip.
 
+config FB_S3_DDC
+	bool "DDC for S3 support"
+	depends on FB_S3
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your S3 graphics card.
+
 config FB_SAVAGE
 	tristate "S3 Savage support"
 	depends on FB && PCI && EXPERIMENTAL
@@ -1983,6 +1991,18 @@ config FB_SH_MOBILE_HDMI
 	---help---
 	  Driver for the on-chip SH-Mobile HDMI controller.
 
+config FB_SH_MOBILE_MERAM
+	tristate "SuperH Mobile MERAM read ahead support for LCDC"
+	depends on FB_SH_MOBILE_LCDC
+	default y
+	---help---
+	  Enable MERAM support for the SH-Mobile LCD controller.
+
+	  This will allow for caching of the framebuffer to provide more
+	  reliable access under heavy main memory bus traffic situations.
+	  Up to 4 memory channels can be configured, allowing 4 RGB or
+	  2 YCbCr framebuffers to be configured.
+
 config FB_TMIO
 	tristate "Toshiba Mobile IO FrameBuffer support"
 	depends on FB && MFD_CORE
@@ -2246,29 +2266,43 @@ config FB_METRONOME
 config FB_MB862XX
 	tristate "Fujitsu MB862xx GDC support"
 	depends on FB
+	depends on PCI || (OF && PPC)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	---help---
 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
 
+choice
+	prompt "GDC variant"
+	depends on FB_MB862XX
+
 config FB_MB862XX_PCI_GDC
 	bool "Carmine/Coral-P(A) GDC"
-	depends on PCI && FB_MB862XX
+	depends on PCI
 	---help---
 	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
 	  PCI graphics controller devices.
 
 config FB_MB862XX_LIME
 	bool "Lime GDC"
-	depends on FB_MB862XX
-	depends on OF && !FB_MB862XX_PCI_GDC
-	depends on PPC
+	depends on OF && PPC
 	select FB_FOREIGN_ENDIAN
 	select FB_LITTLE_ENDIAN
 	---help---
 	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
 
+endchoice
+
+config FB_MB862XX_I2C
+	bool "Support I2C bus on MB862XX GDC"
+	depends on FB_MB862XX && I2C
+	default y
+	help
+	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+	  driver to support accessing I2C devices on controller's I2C bus.
+	  These are usually some video decoder chips.
+
 config FB_EP93XX
 	tristate "EP93XX frame buffer support"
 	depends on FB && ARCH_EP93XX

drivers/video/Makefile

@@ -130,6 +130,7 @@ obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
+obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
 obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
 obj-$(CONFIG_FB_OMAP)             += omap/
 obj-y                             += omap2/