---

yaml
---
r: 242438
b: refs/heads/master
c: ec9ac74
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5027070b3ca2eb90adbf40c2d67f792818ae9077
+refs/heads/master: ec9ac747be8c42a653468295162cbc02d0a8a8a6

trunk/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h

@@ -0,0 +1,343 @@
+/*
+ *
+ * Macros for external SMP-safe access to the PMC MSP71xx reference
+ * board GPIO pins
+ *
+ * Copyright 2010 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MSP_GPIO_MACROS_H__
+#define __MSP_GPIO_MACROS_H__
+
+#include <msp_regops.h>
+#include <msp_regs.h>
+
+#ifdef CONFIG_PMC_MSP7120_GW
+#define MSP_NUM_GPIOS		20
+#else
+#define MSP_NUM_GPIOS		28
+#endif
+
+/* -- GPIO Enumerations -- */
+enum msp_gpio_data {
+	MSP_GPIO_LO = 0,
+	MSP_GPIO_HI = 1,
+	MSP_GPIO_NONE,		/* Special - Means pin is out of range */
+	MSP_GPIO_TOGGLE,	/* Special - Sets pin to opposite */
+};
+
+enum msp_gpio_mode {
+	MSP_GPIO_INPUT		= 0x0,
+	/* MSP_GPIO_ INTERRUPT	= 0x1,	Not supported yet */
+	MSP_GPIO_UART_INPUT	= 0x2,	/* Only GPIO 4 or 5 */
+	MSP_GPIO_OUTPUT		= 0x8,
+	MSP_GPIO_UART_OUTPUT	= 0x9,	/* Only GPIO 2 or 3 */
+	MSP_GPIO_PERIF_TIMERA	= 0x9,	/* Only GPIO 0 or 1 */
+	MSP_GPIO_PERIF_TIMERB	= 0xa,	/* Only GPIO 0 or 1 */
+	MSP_GPIO_UNKNOWN	= 0xb,  /* No such GPIO or mode */
+};
+
+/* -- Static Tables -- */
+
+/* Maps pins to data register */
+static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = {
+	/* GPIO 0 and 1 on the first register */
+	GPIO_DATA1_REG, GPIO_DATA1_REG,
+	/* GPIO 2, 3, 4, and 5 on the second register */
+	GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG,
+	/* GPIO 6, 7, 8, and 9 on the third register */
+	GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG,
+	/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
+	GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG,
+	GPIO_DATA4_REG, GPIO_DATA4_REG,
+	/* GPIO 16 - 23 on the first strange EXTENDED register */
+	EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+	EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+	EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+	/* GPIO 24 - 27 on the second strange EXTENDED register */
+	EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
+	EXTENDED_GPIO2_REG,
+};
+
+/* Maps pins to mode register */
+static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = {
+	/* GPIO 0 and 1 on the first register */
+	GPIO_CFG1_REG, GPIO_CFG1_REG,
+	/* GPIO 2, 3, 4, and 5 on the second register */
+	GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG,
+	/* GPIO 6, 7, 8, and 9 on the third register */
+	GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG,
+	/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
+	GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG,
+	GPIO_CFG4_REG, GPIO_CFG4_REG,
+	/* GPIO 16 - 23 on the first strange EXTENDED register */
+	EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+	EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+	EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG,
+	/* GPIO 24 - 27 on the second strange EXTENDED register */
+	EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG,
+	EXTENDED_GPIO2_REG,
+};
+
+/* Maps 'basic' pins to relative offset from 0 per register */
+static int MSP_GPIO_OFFSET[] = {
+	/* GPIO 0 and 1 on the first register */
+	0, 0,
+	/* GPIO 2, 3, 4, and 5 on the second register */
+	2, 2, 2, 2,
+	/* GPIO 6, 7, 8, and 9 on the third register */
+	6, 6, 6, 6,
+	/* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */
+	10, 10, 10, 10, 10, 10,
+};
+
+/* Maps MODE to allowed pin mask */
+static unsigned int MSP_GPIO_MODE_ALLOWED[] = {
+	0xffffffff,	/* Mode 0 - INPUT */
+	0x00000,	/* Mode 1 - INTERRUPT */
+	0x00030,	/* Mode 2 - UART_INPUT (GPIO 4, 5)*/
+	0, 0, 0, 0, 0,	/* Modes 3, 4, 5, 6, and 7 are reserved */
+	0xffffffff,	/* Mode 8 - OUTPUT */
+	0x0000f,	/* Mode 9 - UART_OUTPUT/
+				PERF_TIMERA (GPIO 0, 1, 2, 3) */
+	0x00003,	/* Mode a - PERF_TIMERB (GPIO 0, 1) */
+	0x00000,	/* Mode b - Not really a mode! */
+};
+
+/* -- Bit masks -- */
+
+/* This gives you the 'register relative offset gpio' number */
+#define OFFSET_GPIO_NUMBER(gpio)	(gpio - MSP_GPIO_OFFSET[gpio])
+
+/* These take the 'register relative offset gpio' number */
+#define BASIC_DATA_REG_MASK(ogpio)		(1 << ogpio)
+#define BASIC_MODE_REG_VALUE(mode, ogpio)	\
+	(mode << BASIC_MODE_REG_SHIFT(ogpio))
+#define BASIC_MODE_REG_MASK(ogpio)		\
+	BASIC_MODE_REG_VALUE(0xf, ogpio)
+#define BASIC_MODE_REG_SHIFT(ogpio)		(ogpio * 4)
+#define BASIC_MODE_REG_FROM_REG(data, ogpio)	\
+	((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio))
+
+/* These take the actual GPIO number (0 through 15) */
+#define BASIC_DATA_MASK(gpio)	\
+	BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE_MASK(gpio)	\
+	BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE(mode, gpio)	\
+	BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE_SHIFT(gpio)	\
+	BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio))
+#define BASIC_MODE_FROM_REG(data, gpio)	\
+	BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio))
+
+/*
+ * Each extended GPIO register is 32 bits long and is responsible for up to
+ * eight GPIOs. The least significant 16 bits contain the set and clear bit
+ * pair for each of the GPIOs. The most significant 16 bits contain the
+ * disable and enable bit pair for each of the GPIOs. For example, the
+ * extended GPIO reg for GPIOs 16-23 is as follows:
+ *
+ *	31: GPIO23_DISABLE
+ *	...
+ *	19: GPIO17_DISABLE
+ *	18: GPIO17_ENABLE
+ *	17: GPIO16_DISABLE
+ *	16: GPIO16_ENABLE
+ *	...
+ *	3:  GPIO17_SET
+ *	2:  GPIO17_CLEAR
+ *	1:  GPIO16_SET
+ *	0:  GPIO16_CLEAR
+ */
+
+/* This gives the 'register relative offset gpio' number */
+#define EXTENDED_OFFSET_GPIO(gpio)	(gpio < 24 ? gpio - 16 : gpio - 24)
+
+/* These take the 'register relative offset gpio' number */
+#define EXTENDED_REG_DISABLE(ogpio)	(0x2 << ((ogpio * 2) + 16))
+#define EXTENDED_REG_ENABLE(ogpio)	(0x1 << ((ogpio * 2) + 16))
+#define EXTENDED_REG_SET(ogpio)		(0x2 << (ogpio * 2))
+#define EXTENDED_REG_CLR(ogpio)		(0x1 << (ogpio * 2))
+
+/* These take the actual GPIO number (16 through 27) */
+#define EXTENDED_DISABLE(gpio)	\
+	EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio))
+#define EXTENDED_ENABLE(gpio)	\
+	EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio))
+#define EXTENDED_SET(gpio)	\
+	EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio))
+#define EXTENDED_CLR(gpio)	\
+	EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio))
+
+#define EXTENDED_FULL_MASK		(0xffffffff)
+
+/* -- API inline-functions -- */
+
+/*
+ * Gets the current value of the specified pin
+ */
+static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio)
+{
+	u32 pinhi_mask = 0, pinhi_mask2 = 0;
+
+	if (gpio >= MSP_NUM_GPIOS)
+		return MSP_GPIO_NONE;
+
+	if (gpio < 16) {
+		pinhi_mask = BASIC_DATA_MASK(gpio);
+	} else {
+		/*
+		 * Two cases are possible with the EXTENDED register:
+		 *  - In output mode (ENABLED flag set), check the CLR bit
+		 *  - In input mode (ENABLED flag not set), check the SET bit
+		 */
+		pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio);
+		pinhi_mask2 = EXTENDED_SET(gpio);
+	}
+	if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) ||
+	    (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2))
+		return MSP_GPIO_HI;
+	else
+		return MSP_GPIO_LO;
+}
+
+/* Sets the specified pin to the specified value */
+static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio)
+{
+	if (gpio >= MSP_NUM_GPIOS)
+		return;
+
+	if (gpio < 16) {
+		if (data == MSP_GPIO_TOGGLE)
+			toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+					BASIC_DATA_MASK(gpio));
+		else if (data == MSP_GPIO_HI)
+			set_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+					BASIC_DATA_MASK(gpio));
+		else
+			clear_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+					BASIC_DATA_MASK(gpio));
+	} else {
+		if (data == MSP_GPIO_TOGGLE) {
+			/* Special ugly case:
+			 *   We have to read the CLR bit.
+			 *   If set, we write the CLR bit.
+			 *   If not, we write the SET bit.
+			 */
+			u32 tmpdata;
+
+			custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+								tmpdata);
+			if (tmpdata & EXTENDED_CLR(gpio))
+				tmpdata = EXTENDED_CLR(gpio);
+			else
+				tmpdata = EXTENDED_SET(gpio);
+			custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+								tmpdata);
+		} else {
+			u32 newdata;
+
+			if (data == MSP_GPIO_HI)
+				newdata = EXTENDED_SET(gpio);
+			else
+				newdata = EXTENDED_CLR(gpio);
+			set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio],
+						EXTENDED_FULL_MASK, newdata);
+		}
+	}
+}
+
+/* Sets the specified pin to the specified value */
+static inline void msp_gpio_pin_hi(unsigned int gpio)
+{
+	msp_gpio_pin_set(MSP_GPIO_HI, gpio);
+}
+
+/* Sets the specified pin to the specified value */
+static inline void msp_gpio_pin_lo(unsigned int gpio)
+{
+	msp_gpio_pin_set(MSP_GPIO_LO, gpio);
+}
+
+/* Sets the specified pin to the opposite value */
+static inline void msp_gpio_pin_toggle(unsigned int gpio)
+{
+	msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio);
+}
+
+/* Gets the mode of the specified pin */
+static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio)
+{
+	enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN;
+	uint32_t data;
+
+	if (gpio >= MSP_NUM_GPIOS)
+		return retval;
+
+	data = *MSP_GPIO_MODE_REGISTER[gpio];
+
+	if (gpio < 16) {
+		retval = BASIC_MODE_FROM_REG(data, gpio);
+	} else {
+		/* Extended pins can only be either INPUT or OUTPUT */
+		if (data & EXTENDED_ENABLE(gpio))
+			retval = MSP_GPIO_OUTPUT;
+		else
+			retval = MSP_GPIO_INPUT;
+	}
+
+	return retval;
+}
+
+/*
+ * Sets the specified mode on the requested pin
+ * Returns 0 on success, or -1 if that mode is not allowed on this pin
+ */
+static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio)
+{
+	u32 modemask, newmode;
+
+	if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode])
+		return -1;
+
+	if (gpio >= MSP_NUM_GPIOS)
+		return -1;
+
+	if (gpio < 16) {
+		modemask = BASIC_MODE_MASK(gpio);
+		newmode =  BASIC_MODE(mode, gpio);
+	} else {
+		modemask = EXTENDED_FULL_MASK;
+		if (mode == MSP_GPIO_INPUT)
+			newmode = EXTENDED_DISABLE(gpio);
+		else
+			newmode = EXTENDED_ENABLE(gpio);
+	}
+	/* Do the set atomically */
+	set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode);
+
+	return 0;
+}
+
+#endif /* __MSP_GPIO_MACROS_H__ */

trunk/arch/mips/pmc-sierra/Kconfig

@@ -24,6 +24,7 @@ config PMC_MSP7120_GW
 	select IRQ_MSP_CIC
 	select HW_HAS_PCI
 	select MSP_HAS_USB
+	select MSP_ETH
 
 config PMC_MSP7120_FPGA
 	bool "PMC-Sierra MSP7120 FPGA"
@@ -40,3 +41,12 @@ config HYPERTRANSPORT
 config MSP_HAS_USB
 	boolean
 	depends on PMC_MSP
+
+config MSP_ETH
+	boolean
+	select MSP_HAS_MAC
+	depends on PMC_MSP
+
+config MSP_HAS_MAC
+	boolean
+	depends on PMC_MSP

trunk/arch/mips/pmc-sierra/msp71xx/Makefile

@@ -8,7 +8,7 @@ obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o
 obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o
 obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o
 obj-$(CONFIG_PCI) += msp_pci.o
-obj-$(CONFIG_MSPETH) += msp_eth.o
+obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o
 obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o
 obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o
 obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o