Merge branch 'linusw/devel' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/linusw/linux-gpio.git into gpio/next

Device driver features, cleanups and bug fixes.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

arch/arm/mach-pxa/tosa.c

@@ -927,8 +927,6 @@ static void tosa_restart(char mode, const char *cmd)
 
 static void __init tosa_init(void)
 {
-	int dummy;
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 
 	pxa_set_ffuart_info(NULL);
@@ -947,10 +945,6 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
-	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
-	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
-	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
-
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
 	pxa_set_i2c_info(NULL);

drivers/gpio/Kconfig

@@ -30,6 +30,9 @@ config ARCH_REQUIRE_GPIOLIB
 	  Selecting this from the architecture code will cause the gpiolib
 	  code to always get built in.
 
+config GPIO_DEVRES
+	def_bool y
+	depends on HAS_IOMEM
 
 
 menuconfig GPIOLIB

drivers/gpio/Makefile

@@ -2,7 +2,8 @@
 
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
 
-obj-$(CONFIG_GPIOLIB)		+= gpiolib.o devres.o
+obj-$(CONFIG_GPIO_DEVRES)	+= devres.o
+obj-$(CONFIG_GPIOLIB)		+= gpiolib.o
 obj-$(CONFIG_OF_GPIO)		+= gpiolib-of.o
 obj-$(CONFIG_GPIO_ACPI)		+= gpiolib-acpi.o
 

drivers/gpio/gpio-mpc8xxx.c

@@ -292,7 +292,6 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
 
 	irq_set_chip_data(virq, h->host_data);
 	irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
 
 	return 0;
 }

drivers/gpio/gpio-mxs.c

@@ -65,6 +65,7 @@ struct mxs_gpio_port {
 	struct irq_domain *domain;
 	struct bgpio_chip bgc;
 	enum mxs_gpio_id devid;
+	u32 both_edges;
 };
 
 static inline int is_imx23_gpio(struct mxs_gpio_port *port)
@@ -81,13 +82,23 @@ static inline int is_imx28_gpio(struct mxs_gpio_port *port)
 
 static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 {
+	u32 val;
 	u32 pin_mask = 1 << d->hwirq;
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mxs_gpio_port *port = gc->private;
 	void __iomem *pin_addr;
 	int edge;
 
+	port->both_edges &= ~pin_mask;
 	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		val = gpio_get_value(port->bgc.gc.base + d->hwirq);
+		if (val)
+			edge = GPIO_INT_FALL_EDGE;
+		else
+			edge = GPIO_INT_RISE_EDGE;
+		port->both_edges |= pin_mask;
+		break;
 	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
 		break;
@@ -124,6 +135,23 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
+static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio)
+{
+	u32 bit, val, edge;
+	void __iomem *pin_addr;
+
+	bit = 1 << gpio;
+
+	pin_addr = port->base + PINCTRL_IRQPOL(port);
+	val = readl(pin_addr);
+	edge = val & bit;
+
+	if (edge)
+		writel(bit, pin_addr + MXS_CLR);
+	else
+		writel(bit, pin_addr + MXS_SET);
+}
+
 /* MXS has one interrupt *per* gpio port */
 static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -137,6 +165,9 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	while (irq_stat != 0) {
 		int irqoffset = fls(irq_stat) - 1;
+		if (port->both_edges & (1 << irqoffset))
+			mxs_flip_edge(port, irqoffset);
+
 		generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
 		irq_stat &= ~(1 << irqoffset);
 	}