---

yaml
---
r: 290553
b: refs/heads/master
c: ffcb973
h: refs/heads/master
i:
  290551: 495076c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d8a199355f8f8a0797c00d98788d7282c9ea38bd
+refs/heads/master: ffcb97388b1d41b1db063eb041cb9af408662127

trunk/Documentation/ioctl/ioctl-number.txt

@@ -255,7 +255,7 @@ Code  Seq#(hex)	Include File		Comments
 		linux/ixjuser.h		<http://web.archive.org/web/*/http://www.quicknet.net>
 'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
 's'	all	linux/cdk.h
-'t'	00-7F	linux/if_ppp.h
+'t'	00-7F	linux/ppp-ioctl.h
 't'	80-8F	linux/isdn_ppp.h
 't'	90	linux/toshiba.h
 'u'	00-1F	linux/smb_fs.h		gone

trunk/Documentation/networking/l2tp.txt

@@ -111,7 +111,7 @@ When creating PPPoL2TP sockets, the application provides information
 to the driver about the socket in a socket connect() call. Source and
 destination tunnel and session ids are provided, as well as the file
 descriptor of a UDP socket. See struct pppol2tp_addr in
-include/linux/if_ppp.h. Note that zero tunnel / session ids are
+include/linux/if_pppol2tp.h. Note that zero tunnel / session ids are
 treated specially. When creating the per-tunnel PPPoL2TP management
 socket in Step 2 above, zero source and destination session ids are
 specified, which tells the driver to prepare the supplied UDP file

trunk/Documentation/networking/ppp_generic.txt

@@ -342,7 +342,7 @@ an interface unit are:
 				numbers on received multilink fragments
 	SC_MP_XSHORTSEQ		transmit short multilink sequence nos.
 
-  The values of these flags are defined in <linux/if_ppp.h>.  Note
+  The values of these flags are defined in <linux/ppp-ioctl.h>.  Note
   that the values of the SC_MULTILINK, SC_MP_SHORTSEQ and
   SC_MP_XSHORTSEQ bits are ignored if the CONFIG_PPP_MULTILINK option
   is not selected.
@@ -358,7 +358,7 @@ an interface unit are:
 
 * PPPIOCSCOMPRESS sets the parameters for packet compression or
   decompression.  The argument should point to a ppp_option_data
-  structure (defined in <linux/if_ppp.h>), which contains a
+  structure (defined in <linux/ppp-ioctl.h>), which contains a
   pointer/length pair which should describe a block of memory
   containing a CCP option specifying a compression method and its
   parameters.  The ppp_option_data struct also contains a `transmit'
@@ -395,7 +395,7 @@ an interface unit are:
 
 * PPPIOCSNPMODE sets the network-protocol mode for a given network
   protocol.  The argument should point to an npioctl struct (defined
-  in <linux/if_ppp.h>).  The `protocol' field gives the PPP protocol
+  in <linux/ppp-ioctl.h>).  The `protocol' field gives the PPP protocol
   number for the protocol to be affected, and the `mode' field
   specifies what to do with packets for that protocol:
 

trunk/drivers/isdn/capi/capi.c

@@ -25,7 +25,7 @@
 #include <linux/tty.h>
 #include <linux/netdevice.h>
 #include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
+#include <linux/ppp-ioctl.h>
 #include <linux/skbuff.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>

trunk/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c

@@ -2142,7 +2142,7 @@ static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap)
 	return rval;
 }
 
-static u8 bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
+static int bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
 {
 	struct bnx2x *bp = netdev_priv(netdev);
 	u8 rval = 0;
@@ -2169,7 +2169,7 @@ static u8 bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
 	return rval;
 }
 
-static u8 bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num)
+static int bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num)
 {
 	struct bnx2x *bp = netdev_priv(netdev);
 	DP(NETIF_MSG_LINK, "num tcs = %d; Not supported\n", num);

trunk/drivers/net/ethernet/broadcom/tg3.c

@@ -5928,6 +5928,9 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
 
 	/* Refill RX ring(s). */
 	if (!tg3_flag(tp, ENABLE_RSS)) {
+		/* Sync BD data before updating mailbox */
+		wmb();
+
 		if (work_mask & RXD_OPAQUE_RING_STD) {
 			tpr->rx_std_prod_idx = std_prod_idx &
 					       tp->rx_std_ring_mask;
@@ -6970,6 +6973,9 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_tx_timestamp(skb);
 	netdev_sent_queue(tp->dev, skb->len);
 
+	/* Sync BD data before updating mailbox */
+	wmb();
+
 	/* Packets are ready, update Tx producer idx local and on card. */
 	tw32_tx_mbox(tnapi->prodmbox, entry);
 
@@ -11727,6 +11733,10 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, bool tso_loopback)
 	} else {
 		num_pkts = 1;
 		data_off = ETH_HLEN;
+
+		if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
+		    tx_len > VLAN_ETH_FRAME_LEN)
+			base_flags |= TXD_FLAG_JMB_PKT;
 	}
 
 	for (i = data_off; i < tx_len; i++)
@@ -11759,6 +11769,9 @@ static int tg3_run_loopback(struct tg3 *tp, u32 pktsz, bool tso_loopback)
 
 	tnapi->tx_prod++;
 
+	/* Sync BD data before updating mailbox */
+	wmb();
+
 	tw32_tx_mbox(tnapi->prodmbox, tnapi->tx_prod);
 	tr32_mailbox(tnapi->prodmbox);
 
@@ -11857,6 +11870,10 @@ static int tg3_test_loopback(struct tg3 *tp, u64 *data, bool do_extlpbk)
 {
 	int err = -EIO;
 	u32 eee_cap;
+	u32 jmb_pkt_sz = 9000;
+
+	if (tp->dma_limit)
+		jmb_pkt_sz = tp->dma_limit - ETH_HLEN;
 
 	eee_cap = tp->phy_flags & TG3_PHYFLG_EEE_CAP;
 	tp->phy_flags &= ~TG3_PHYFLG_EEE_CAP;
@@ -11900,7 +11917,7 @@ static int tg3_test_loopback(struct tg3 *tp, u64 *data, bool do_extlpbk)
 			data[0] |= TG3_STD_LOOPBACK_FAILED;
 
 		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
-		    tg3_run_loopback(tp, 9000 + ETH_HLEN, false))
+		    tg3_run_loopback(tp, jmb_pkt_sz + ETH_HLEN, false))
 			data[0] |= TG3_JMB_LOOPBACK_FAILED;
 
 		tg3_mac_loopback(tp, false);
@@ -11925,7 +11942,7 @@ static int tg3_test_loopback(struct tg3 *tp, u64 *data, bool do_extlpbk)
 		    tg3_run_loopback(tp, ETH_FRAME_LEN, true))
 			data[1] |= TG3_TSO_LOOPBACK_FAILED;
 		if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
-		    tg3_run_loopback(tp, 9000 + ETH_HLEN, false))
+		    tg3_run_loopback(tp, jmb_pkt_sz + ETH_HLEN, false))
 			data[1] |= TG3_JMB_LOOPBACK_FAILED;
 
 		if (do_extlpbk) {
@@ -11943,7 +11960,7 @@ static int tg3_test_loopback(struct tg3 *tp, u64 *data, bool do_extlpbk)
 			    tg3_run_loopback(tp, ETH_FRAME_LEN, true))
 				data[2] |= TG3_TSO_LOOPBACK_FAILED;
 			if (tg3_flag(tp, JUMBO_RING_ENABLE) &&
-			    tg3_run_loopback(tp, 9000 + ETH_HLEN, false))
+			    tg3_run_loopback(tp, jmb_pkt_sz + ETH_HLEN, false))
 				data[2] |= TG3_JMB_LOOPBACK_FAILED;
 		}
 
@@ -12250,7 +12267,7 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
 static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct tg3 *tp = netdev_priv(dev);
-	int err;
+	int err, reset_phy = 0;
 
 	if (new_mtu < TG3_MIN_MTU || new_mtu > TG3_MAX_MTU(tp))
 		return -EINVAL;
@@ -12273,7 +12290,13 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 
 	tg3_set_mtu(dev, tp, new_mtu);
 
-	err = tg3_restart_hw(tp, 0);
+	/* Reset PHY, otherwise the read DMA engine will be in a mode that
+	 * breaks all requests to 256 bytes.
+	 */
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57766)
+		reset_phy = 1;
+
+	err = tg3_restart_hw(tp, reset_phy);
 
 	if (!err)
 		tg3_netif_start(tp);
@@ -14219,12 +14242,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 		tg3_flag_set(tp, PCI_EXPRESS);
 
-		if (tp->pci_chip_rev_id == CHIPREV_ID_5719_A0) {
-			int readrq = pcie_get_readrq(tp->pdev);
-			if (readrq > 2048)
-				pcie_set_readrq(tp->pdev, 2048);
-		}
-
 		pci_read_config_word(tp->pdev,
 				     pci_pcie_cap(tp->pdev) + PCI_EXP_LNKCTL,
 				     &lnkctl);