sh: Integrate the SH-5 onchip_remap() more coherently.

Presently this is special-cased for early initialization. While there are
situations where these static early initializations are still necessary,
with minor changes it is possible to use this for the regular ioremap
implementation as well. This allows us to kill off the special-casing for
the remap completely and to start tidying up all of the SH-5
special-casing in drivers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/mach-cayman/irq.c

@@ -161,7 +161,7 @@ void init_cayman_irq(void)
 {
 	int i;
 
-	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
 	if (!epld_virt) {
 		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
 		return;

arch/sh/boards/mach-cayman/setup.c

@@ -102,7 +102,7 @@ static int __init smsc_superio_setup(void)
 {
 	unsigned char devid, devrev;
 
-	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
 	if (!smsc_superio_virt) {
 		panic("Unable to remap SMSC SuperIO\n");
 	}

arch/sh/drivers/pci/pci-sh5.c

@@ -119,12 +119,12 @@ static int __init sh5pci_init(void)
                 return -EINVAL;
         }
 
-	pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+	pcicr_virt = (unsigned long)ioremap_nocache(SH5PCI_ICR_BASE, 1024);
 	if (!pcicr_virt) {
 		panic("Unable to remap PCICR\n");
 	}
 
-	PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+	PCI_IO_AREA = (unsigned long)ioremap_nocache(SH5PCI_IO_BASE, 0x10000);
 	if (!PCI_IO_AREA) {
 		panic("Unable to remap PCIIO\n");
 	}

arch/sh/include/asm/io.h

@@ -224,11 +224,6 @@ void __iomem *__ioremap(unsigned long offset, unsigned long size,
 			unsigned long flags);
 void __iounmap(void __iomem *addr);
 
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
-			   const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-
 static inline void __iomem *
 __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 {
@@ -263,8 +258,6 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 	return __ioremap(offset, size, flags);
 }
 #else
-#define onchip_remap(addr, size, name)		(addr)
-#define onchip_unmap(addr)			do { } while (0)
 #define __ioremap_mode(offset, size, flags)	((void __iomem *)(offset))
 #define __iounmap(addr)				do { } while (0)
 #endif /* CONFIG_MMU */

arch/sh/kernel/cpu/irq/intc-sh5.c

@@ -188,7 +188,7 @@ void __init plat_irq_setup(void)
 	unsigned long reg;
 	int i;
 
-	intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+	intc_virt = (unsigned long)ioremap_nocache(INTC_BASE, 1024);
 	if (!intc_virt) {
 		panic("Unable to remap INTC\n");
 	}

arch/sh/kernel/cpu/sh5/Makefile

@@ -6,6 +6,9 @@ obj-y := entry.o probe.o switchto.o
 obj-$(CONFIG_SH_FPU)		+= fpu.o
 obj-$(CONFIG_KALLSYMS)		+= unwind.o
 
+# CPU subtype setup
+obj-$(CONFIG_CPU_SH5)		+= setup-sh5.o
+
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH5)		:= clock-sh5.o
 

arch/sh/kernel/cpu/sh5/clock-sh5.c

@@ -71,7 +71,7 @@ static struct clk_ops *sh5_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
-	cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+	cprc_base = (unsigned long)ioremap_nocache(CPRC_BASE, 1024);
 	BUG_ON(!cprc_base);
 
 	if (idx < ARRAY_SIZE(sh5_clk_ops))

arch/sh/kernel/cpu/sh5/entry.S

@@ -1410,8 +1410,8 @@ peek_real_address_q:
 	   r2(out) : result quadword
 
 	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to onchip_remap the debug
-	   module, and to avoid the need to onchip_remap the watchpoint
+	   registers for debugging (to avoid the need to ioremap the debug
+	   module, and to avoid the need to ioremap the watchpoint
 	   controller in a way that identity maps sufficient bits to avoid the
 	   SH5-101 cut2 silicon defect).
 
@@ -1459,8 +1459,8 @@ poke_real_address_q:
 	   r3 : quadword value to write.
 
 	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to onchip_remap the debug
-	   module, and to avoid the need to onchip_remap the watchpoint
+	   registers for debugging (to avoid the need to ioremap the debug
+	   module, and to avoid the need to ioremap the watchpoint
 	   controller in a way that identity maps sufficient bits to avoid the
 	   SH5-101 cut2 silicon defect).
 

arch/sh/kernel/cpu/sh5/setup-sh5.c

@@ -0,0 +1,46 @@
+/*
+ * SH5-101/SH5-103 CPU Setup
+ *
+ *  Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <asm/addrspace.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= PHYS_PERIPHERAL_BLOCK + 0x01030000,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.type		= PORT_SCIF,
+		.irqs		= { 39, 40, 42, 0 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh5_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init sh5_devices_setup(void)
+{
+	return platform_add_devices(sh5_devices,
+				    ARRAY_SIZE(sh5_devices));
+}
+__initcall(sh5_devices_setup);

arch/sh/kernel/time_64.c

@@ -243,12 +243,12 @@ void __init time_init(void)
 	unsigned long interval;
 	struct clk *clk;
 
-	tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
+	tmu_base = (unsigned long)ioremap_nocache(TMU_BASE, 1024);
 	if (!tmu_base) {
 		panic("Unable to remap TMU\n");
 	}
 
-	rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
+	rtc_base = (unsigned long)ioremap_nocache(RTC_BASE, 1024);
 	if (!rtc_base) {
 		panic("Unable to remap RTC\n");
 	}