Merge branch 'next-s3c24xx' into next-s3c

arch/arm/mach-s3c2410/include/mach/irqs.h

@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 

arch/arm/mach-s3c2410/include/mach/regs-gpio.h

@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
 
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
 
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
 
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 

arch/arm/mach-s3c2410/include/mach/spi.h

@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 					      int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					       int enable);
+
 #endif /* __ASM_ARCH_SPI_H */

arch/arm/plat-s3c/include/plat/devs.h

@@ -58,5 +58,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif

arch/arm/plat-s3c24xx/Kconfig

@@ -105,6 +105,12 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 	  SPI GPIO configuration code for BUS 1 when connected to
 	  GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+	bool
+	help
+	  SPI GPIO configuration code for BUS 1 when connected to
+	  GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
 config MACH_SMDK

arch/arm/plat-s3c24xx/Makefile

@@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 
 # machine common support
 

arch/arm/plat-s3c24xx/devs.c

@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -473,4 +475,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+	[0] = {
+		.start = S3C2440_PA_AC97,
+		.end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3C244x_AC97,
+		.end   = IRQ_S3C244x_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name  = "PCM out",
+		.start = DMACH_PCM_OUT,
+		.end   = DMACH_PCM_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.name  = "PCM in",
+		.start = DMACH_PCM_IN,
+		.end   = DMACH_PCM_IN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.name  = "Mic in",
+		.start = DMACH_MIC_IN,
+		.end   = DMACH_MIC_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
+	.resource	  = s3c_ac97_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440

arch/arm/plat-s3c24xx/include/plat/fiq.h

@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);

arch/arm/plat-s3c24xx/irq.c

@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 	}
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
 	int irqno;
 	int i;
 
+#ifdef CONFIG_FIQ
+	init_FIQ();
+#endif
+
 	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
 	/* first, clear all interrupts pending... */

arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c

@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					int enable)
+{
+
+	printk(KERN_INFO "%s(%d)\n", __func__, enable);
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+	}
+}

sound/soc/s3c24xx/s3c24xx-ac97.h

@@ -20,12 +20,6 @@
 #define AC_CMD_ADDR(x) (x << 16)
 #define AC_CMD_DATA(x) (x & 0xffff)
 
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
-#endif
-
 extern struct snd_soc_dai s3c2443_ac97_dai[];
 
 #endif /*S3C24XXAC97_H_*/