---

yaml
---
r: 56272
b: refs/heads/master
c: c5b7bed
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5c34202b8bf942da411b6599668a76b07449bbfd
+refs/heads/master: c5b7bede71853d92fc747cdc12fa5234b6045731

trunk/Documentation/feature-removal-schedule.txt

@@ -328,3 +328,22 @@ Who:   Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
+What: libata.spindown_compat module parameter
+When: Dec 2008
+Why:  halt(8) synchronizes caches for and spins down libata disks
+      because libata didn't use to spin down disk on system halt
+      (only synchronized caches).
+      Spin down on system halt is now implemented and can be tested
+      using sysfs node /sys/class/scsi_disk/h:c:i:l/manage_start_stop.
+      Because issuing spin down command to an already spun down disk
+      makes some disks spin up just to spin down again, the old
+      behavior needs to be maintained till userspace tool is updated
+      to check the sysfs node and not to spin down disks with the
+      node set to one.
+      This module parameter is to give userspace tool the time to
+      get updated and should be removed after userspace is
+      reasonably updated.
+Who:  Tejun Heo <htejun@gmail.com>
+
+---------------------------
+

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -821,6 +821,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  6stack-dig	6-jack digital with SPDIF I/O
 	  arima		Arima W820Di1
 	  macpro	MacPro support
+	  w2jc		ASUS W2JC
 	  auto		auto-config reading BIOS (default)
 
 	ALC883/888
@@ -852,6 +853,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  3stack-dig	3-jack with SPDIF OUT
 	  6stack-dig	6-jack with SPDIF OUT
 	  3stack-660	3-jack (for ALC660VD)
+	  lenovo	Lenovo 3000 C200
 	  auto		auto-config reading BIOS (default)
 
 	CMI9880
@@ -909,6 +911,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  macbook	Intel Mac Book
 	  macbook-pro-v1 Intel Mac Book Pro 1st generation
 	  macbook-pro	Intel Mac Book Pro 2nd generation
+	  imac-intel	Intel iMac
 
 	STAC9202/9250/9251
 	  ref		Reference board, base config
@@ -924,6 +927,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  vaio		Setup for VAIO FE550G/SZ110
 	  vaio-ar Setup for VAIO AR
 
+    The model name "genric" is treated as a special case.  When this
+    model is given, the driver uses the generic codec parser without
+    "codec-patch".  It's sometimes good for testing and debugging.
+
     If the default configuration doesn't work and one of the above
     matches with your device, report it together with the PCI
     subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
@@ -1278,6 +1285,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     port	- port number or -1 (disable)
     irq		- IRQ number or -1 (disable)
     pnp		- PnP detection - 0 = disable, 1 = enable (default)
+    uart_enter	- Issue UART_ENTER command at open - bool, default = on
 
     This module supports multiple devices and PnP.
 
@@ -1692,6 +1700,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple devices, autoprobe and hotplugging.
 
+  Module snd-usb-caiaq
+  --------------------
+
+    Module for caiaq UB audio interfaces,
+	    * Native Instruments RigKontrol2
+	    * Native Instruments Kore Controller
+	    * Native Instruments Audio Kontrol 1
+	    * Native Instruments Audio 8 DJ
+
+    This module supports multiple devices, autoprobe and hotplugging.
+
   Module snd-usb-usx2y
   --------------------
 
@@ -2046,4 +2065,4 @@ Links and Addresses
        https://bugtrack.alsa-project.org/bugs/
 
   ALSA Developers ML
-       mailto:alsa-devel@lists.sourceforge.net
+       mailto:alsa-devel@alsa-project.org

trunk/Documentation/sound/alsa/Bt87x.txt

@@ -36,8 +36,8 @@ recorded data is not right, try to specify the digital_rate option with
 other values than the default 32000 (often it's 44100 or 64000).
 
 If you have an unknown card, please mail the ID and board name to
-<alsa-devel@lists.sf.net>, regardless of whether audio capture works or
-not, so that future versions of this driver know about your card.
+<alsa-devel@alsa-project.org>, regardless of whether audio capture works
+or not, so that future versions of this driver know about your card.
 
 
 Audio modes

trunk/Documentation/video4linux/CARDLIST.saa7134

@@ -52,7 +52,7 @@
  51 -> ProVideo PV952                           [1540:9524]
  52 -> AverMedia AverTV/305                     [1461:2108]
  53 -> ASUS TV-FM 7135                          [1043:4845]
- 54 -> LifeView FlyTV Platinum FM / Gold        [5168:0214,1489:0214,5168:0304]
+ 54 -> LifeView FlyTV Platinum FM / Gold        [5168:0214,5168:5214,1489:0214,5168:0304]
  55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere Duo [5168:0306,4E42:0306]
  56 -> Avermedia AVerTV 307                     [1461:a70a]
  57 -> Avermedia AVerTV GO 007 FM               [1461:f31f]
@@ -111,3 +111,6 @@
 110 -> Avermedia M102                           [1461:f31e]
 111 -> ASUS P7131 4871                          [1043:4871]
 112 -> ASUSTeK P7131 Hybrid                     [1043:4876]
+113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6]
+114 -> KWorld DVB-T 210                         [17de:7250]
+115 -> Sabrent PCMCIA TV-PCB05                  [0919:2003]

trunk/Documentation/video4linux/sn9c102.txt

@@ -355,6 +355,9 @@ devices assembling the SN9C1xx PC camera controllers:
 
 Vendor ID  Product ID
 ---------  ----------
+0x0458     0x7025
+0x045e     0x00f5
+0x045e     0x00f7
 0x0471     0x0327
 0x0471     0x0328
 0x0c45     0x6001
@@ -432,7 +435,7 @@ Image sensor / SN9C1xx bridge      | SN9C10[12]  SN9C103  SN9C105  SN9C120
 HV7131D    Hynix Semiconductor     | Yes         No       No       No
 HV7131R    Hynix Semiconductor     | No          Yes      Yes      Yes
 MI-0343    Micron Technology       | Yes         No       No       No
-MI-0360    Micron Technology       | No          Yes      No       No
+MI-0360    Micron Technology       | No          Yes      Yes      Yes
 OV7630     OmniVision Technologies | Yes         Yes      No       No
 OV7660     OmniVision Technologies | No          No       Yes      Yes
 PAS106B    PixArt Imaging          | Yes         No       No       No
@@ -478,13 +481,12 @@ scaling factor is restored to 1.
 This driver supports two different video formats: the first one is the "8-bit
 Sequential Bayer" format and can be used to obtain uncompressed video data
 from the device through the current I/O method, while the second one provides
-"raw" compressed video data (without frame headers not related to the
-compressed data). The compression quality may vary from 0 to 1 and can be
-selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2
-ioctl's. For maximum flexibility, both the default active video format and the
-default compression quality depend on how the image sensor being used is
-initialized (as described in the documentation of the API for the image sensors
-supplied by this driver).
+either "raw" compressed video data (without frame headers not related to the
+compressed data) or standard JPEG (with frame headers). The compression quality
+may vary from 0 to 1 and can be selected or queried thanks to the
+VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP V4L2 ioctl's. For maximum flexibility,
+both the default active video format and the default compression quality
+depend on how the image sensor being used is initialized.
 
 
 11. Video frame formats [1]

trunk/MAINTAINERS

@@ -372,7 +372,7 @@ AOA (Apple Onboard Audio) ALSA DRIVER
 P:	Johannes Berg
 M:	johannes@sipsolutions.net
 L:	linuxppc-dev@ozlabs.org
-L:	alsa-devel@alsa-project.org
+L:	alsa-devel@alsa-project.org (subscribers-only)
 S:	Maintained
 
 APM DRIVER
@@ -3239,13 +3239,13 @@ S:	Maintained
 SOUND
 P:	Jaroslav Kysela
 M:	perex@suse.cz
-L:	alsa-devel@alsa-project.org
+L:	alsa-devel@alsa-project.org (subscribers-only)
 S:	Maintained
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
 P:	Liam Girdwood
 M:	liam.girdwood@wolfsonmicro.com
-L:	alsa-devel@alsa-project.org
+L:	alsa-devel@alsa-project.org (subscribers-only)
 S:	Supported
 
 SPI SUBSYSTEM

trunk/arch/i386/kernel/verify_cpu.S

@@ -10,7 +10,9 @@ verify_cpu:
 
 #if CONFIG_X86_MINIMUM_CPU_MODEL >= 4
 	pushfl
-	orl	$(1<<18),(%esp)		# try setting AC
+	pop	%eax
+	orl	$(1<<18),%eax		# try setting AC
+	push	%eax
 	popfl
 	pushfl
 	popl    %eax

trunk/arch/ia64/Kconfig

@@ -31,6 +31,10 @@ config ZONE_DMA
 	def_bool y
 	depends on !IA64_SGI_SN2
 
+config QUICKLIST
+	bool
+	default y
+
 config MMU
 	bool
 	default y

trunk/arch/ia64/hp/common/hwsw_iommu.c

@@ -63,7 +63,7 @@ use_swiotlb (struct device *dev)
 	return dev && dev->dma_mask && !hwiommu_dma_supported(dev, *dev->dma_mask);
 }
 
-void
+void __init
 hwsw_init (void)
 {
 	/* default to a smallish 2MB sw I/O TLB */

trunk/arch/ia64/kernel/entry.S

@@ -1583,5 +1583,7 @@ sys_call_table:
 	data8 sys_vmsplice
 	data8 sys_ni_syscall			// reserved for move_pages
 	data8 sys_getcpu
+	data8 sys_epoll_pwait			// 1305
+	data8 sys_utimensat
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls

trunk/arch/ia64/kernel/err_inject.c

@@ -291,5 +291,5 @@ module_init(err_inject_init);
 module_exit(err_inject_exit);
 
 MODULE_AUTHOR("Fenghua Yu <fenghua.yu@intel.com>");
-MODULE_DESCRIPTION("MC error injection kenrel sysfs interface");
+MODULE_DESCRIPTION("MC error injection kernel sysfs interface");
 MODULE_LICENSE("GPL");

trunk/arch/ia64/kernel/irq.c

@@ -104,6 +104,17 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
 }
+
+bool is_affinity_mask_valid(cpumask_t cpumask)
+{
+	if (ia64_platform_is("sn2")) {
+		/* Only allow one CPU to be specified in the smp_affinity mask */
+		if (cpus_weight(cpumask) != 1)
+			return false;
+	}
+	return true;
+}
+
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_HOTPLUG_CPU

trunk/arch/ia64/kernel/kprobes.c

@@ -370,14 +370,18 @@ static int __kprobes valid_kprobe_addr(int template, int slot,
 
 static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	kcb->prev_kprobe.kp = kprobe_running();
-	kcb->prev_kprobe.status = kcb->kprobe_status;
+	unsigned int i;
+	i = atomic_add_return(1, &kcb->prev_kprobe_index);
+	kcb->prev_kprobe[i-1].kp = kprobe_running();
+	kcb->prev_kprobe[i-1].status = kcb->kprobe_status;
 }
 
 static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
-	kcb->kprobe_status = kcb->prev_kprobe.status;
+	unsigned int i;
+	i = atomic_sub_return(1, &kcb->prev_kprobe_index);
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe[i].kp;
+	kcb->kprobe_status = kcb->prev_kprobe[i].status;
 }
 
 static void __kprobes set_current_kprobe(struct kprobe *p,

trunk/arch/ia64/kernel/machvec.c

@@ -35,7 +35,7 @@ lookup_machvec (const char *name)
 	return 0;
 }
 
-void
+void __init
 machvec_init (const char *name)
 {
 	struct ia64_machine_vector *mv;

trunk/arch/ia64/kernel/mca.c

@@ -118,7 +118,9 @@ static ia64_mc_info_t		ia64_mc_info;
 #define CPE_HISTORY_LENGTH    5
 #define CMC_HISTORY_LENGTH    5
 
+#ifdef CONFIG_ACPI
 static struct timer_list cpe_poll_timer;
+#endif
 static struct timer_list cmc_poll_timer;
 /*
  * This variable tells whether we are currently in polling mode.

trunk/arch/ia64/mm/contig.c

@@ -88,7 +88,7 @@ void show_mem(void)
 	printk(KERN_INFO "%d pages shared\n", total_shared);
 	printk(KERN_INFO "%d pages swap cached\n", total_cached);
 	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       pgtable_quicklist_total_size());
+	       quicklist_total_size());
 	printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
 }
 

trunk/arch/ia64/mm/discontig.c

@@ -561,7 +561,7 @@ void show_mem(void)
 	printk(KERN_INFO "%d pages shared\n", total_shared);
 	printk(KERN_INFO "%d pages swap cached\n", total_cached);
 	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       pgtable_quicklist_total_size());
+	       quicklist_total_size());
 	printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
 }
 

trunk/arch/ia64/mm/init.c

@@ -39,9 +39,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-DEFINE_PER_CPU(unsigned long *, __pgtable_quicklist);
-DEFINE_PER_CPU(long, __pgtable_quicklist_size);
-
 extern void ia64_tlb_init (void);
 
 unsigned long MAX_DMA_ADDRESS = PAGE_OFFSET + 0x100000000UL;
@@ -56,54 +53,6 @@ EXPORT_SYMBOL(vmem_map);
 struct page *zero_page_memmap_ptr;	/* map entry for zero page */
 EXPORT_SYMBOL(zero_page_memmap_ptr);
 
-#define MIN_PGT_PAGES			25UL
-#define MAX_PGT_FREES_PER_PASS		16L
-#define PGT_FRACTION_OF_NODE_MEM	16
-
-static inline long
-max_pgt_pages(void)
-{
-	u64 node_free_pages, max_pgt_pages;
-
-#ifndef	CONFIG_NUMA
-	node_free_pages = nr_free_pages();
-#else
-	node_free_pages = node_page_state(numa_node_id(), NR_FREE_PAGES);
-#endif
-	max_pgt_pages = node_free_pages / PGT_FRACTION_OF_NODE_MEM;
-	max_pgt_pages = max(max_pgt_pages, MIN_PGT_PAGES);
-	return max_pgt_pages;
-}
-
-static inline long
-min_pages_to_free(void)
-{
-	long pages_to_free;
-
-	pages_to_free = pgtable_quicklist_size - max_pgt_pages();
-	pages_to_free = min(pages_to_free, MAX_PGT_FREES_PER_PASS);
-	return pages_to_free;
-}
-
-void
-check_pgt_cache(void)
-{
-	long pages_to_free;
-
-	if (unlikely(pgtable_quicklist_size <= MIN_PGT_PAGES))
-		return;
-
-	preempt_disable();
-	while (unlikely((pages_to_free = min_pages_to_free()) > 0)) {
-		while (pages_to_free--) {
-			free_page((unsigned long)pgtable_quicklist_alloc());
-		}
-		preempt_enable();
-		preempt_disable();
-	}
-	preempt_enable();
-}
-
 void
 lazy_mmu_prot_update (pte_t pte)
 {

trunk/arch/ia64/sn/kernel/io_common.c

@@ -364,7 +364,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev)
 
 	element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
 	if (!element) {
-		dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
+		dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
 		return;
 	}
 	element->sysdata = SN_PCIDEV_INFO(dev);

trunk/arch/ia64/sn/kernel/xpc_partition.c

@@ -574,7 +574,7 @@ xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version,
 		u64 remote_vars_pa, struct xpc_vars *remote_vars)
 {
 	part->remote_rp_version = remote_rp_version;
-	dev_dbg(xpc_part, "  remote_rp_version = 0x%016lx\n",
+	dev_dbg(xpc_part, "  remote_rp_version = 0x%016x\n",
 		part->remote_rp_version);
 
 	part->remote_rp_stamp = *remote_rp_stamp;