Merge branch 'tegra/devel' into next/devel

Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt

@@ -0,0 +1,5 @@
+NVIDIA Tegra 2 pinmux controller
+
+Required properties:
+- compatible : "nvidia,tegra20-pinmux"
+

arch/arm/boot/dts/tegra-ventana.dts

@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra2 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	chosen {
+		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
+	};
+
+	memory {
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	serial@70006300 {
+		clock-frequency = < 216000000 >;
+	};
+
+	sdhci@c8000400 {
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+	};
+
+	sdhci@c8000600 {
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
+		support-8bit;
+	};
+};

arch/arm/boot/dts/tegra20.dtsi

@@ -77,6 +77,14 @@
 		gpio-controller;
 	};
 
+	pinmux: pinmux@70000000 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = < 0x70000014 0x10    /* Tri-state registers */
+			0x70000080 0x20    /* Mux registers */
+			0x700000a0 0x14    /* Pull-up/down registers */
+			0x70000868 0xa8 >; /* Pad control registers */
+	};
+
 	serial@70006000 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;

arch/arm/configs/tegra_defconfig

@@ -25,6 +25,7 @@ CONFIG_MACH_KAEN=y
 CONFIG_MACH_PAZ00=y
 CONFIG_MACH_TRIMSLICE=y
 CONFIG_MACH_WARIO=y
+CONFIG_MACH_VENTANA=y
 CONFIG_TEGRA_DEBUG_UARTD=y
 CONFIG_ARM_ERRATA_742230=y
 CONFIG_NO_HZ=y
@@ -38,7 +39,6 @@ CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_VFP=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -65,41 +65,69 @@ CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 # CONFIG_WIRELESS is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_MISC_DEVICES=y
 CONFIG_AD525X_DPOT=y
 CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_R8169=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_TEGRA=y
+CONFIG_SPI=y
+CONFIG_SPI_TEGRA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_TPS6586X=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TEGRA=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_IIO=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_AK8975=y
@@ -123,18 +151,15 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_SG=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ECB=y

arch/arm/mach-tegra/Kconfig

@@ -69,6 +69,12 @@ config MACH_WARIO
        help
          Support for the Wario version of Seaboard
 
+config MACH_VENTANA
+       bool "Ventana board"
+       select MACH_TEGRA_DT
+       help
+         Support for the nVidia Ventana development platform
+
 choice
         prompt "Low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE

arch/arm/mach-tegra/Makefile

@@ -31,6 +31,7 @@ obj-${CONFIG_MACH_SEABOARD}             += board-seaboard-pinmux.o
 
 obj-${CONFIG_MACH_TEGRA_DT}             += board-dt.o
 obj-${CONFIG_MACH_TEGRA_DT}             += board-harmony-pinmux.o
+obj-${CONFIG_MACH_TEGRA_DT}             += board-seaboard-pinmux.o
 
 obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice.o
 obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice-pinmux.o

arch/arm/mach-tegra/Makefile.boot

@@ -4,3 +4,4 @@ initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
 
 dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
 dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb

arch/arm/mach-tegra/board-dt.c

@@ -47,7 +47,7 @@
 
 void harmony_pinmux_init(void);
 void seaboard_pinmux_init(void);
-
+void ventana_pinmux_init(void);
 
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
@@ -80,9 +80,19 @@ static struct of_device_id tegra_dt_gic_match[] __initdata = {
 	{}
 };
 
+static struct {
+	char *machine;
+	void (*init)(void);
+} pinmux_configs[] = {
+	{ "nvidia,harmony", harmony_pinmux_init },
+	{ "nvidia,seaboard", seaboard_pinmux_init },
+	{ "nvidia,ventana", ventana_pinmux_init },
+};
+
 static void __init tegra_dt_init(void)
 {
 	struct device_node *node;
+	int i;
 
 	node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
 						TEGRA_ARM_INT_DIST_BASE);
@@ -91,10 +101,15 @@ static void __init tegra_dt_init(void)
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
-	if (of_machine_is_compatible("nvidia,harmony"))
-		harmony_pinmux_init();
-	else if (of_machine_is_compatible("nvidia,seaboard"))
-		seaboard_pinmux_init();
+	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
+		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
+			pinmux_configs[i].init();
+			break;
+		}
+	}
+
+	WARN(i == ARRAY_SIZE(pinmux_configs),
+		"Unknown platform! Pinmuxing not initialized\n");
 
 	/*
 	 * Finished with the static registrations now; fill in the missing
@@ -106,6 +121,7 @@ static void __init tegra_dt_init(void)
 static const char * tegra_dt_board_compat[] = {
 	"nvidia,harmony",
 	"nvidia,seaboard",
+	"nvidia,ventana",
 	NULL
 };
 

arch/arm/mach-tegra/board-harmony-pinmux.c

@@ -20,6 +20,7 @@
 
 #include "gpio-names.h"
 #include "board-harmony.h"
+#include "devices.h"
 
 static struct tegra_pingroup_config harmony_pinmux[] = {
 	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config harmony_pinmux[] = {
 	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 };
 
+static struct platform_device *pinmux_devices[] = {
+	&tegra_gpio_device,
+	&tegra_pinmux_device,
+};
+
 static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD2_CD,		.enable = true	},
 	{ .gpio = TEGRA_GPIO_SD2_WP,		.enable = true	},
@@ -155,6 +161,8 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void harmony_pinmux_init(void)
 {
+	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));

arch/arm/mach-tegra/board-harmony-power.c

@@ -18,10 +18,11 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-
+#include <linux/io.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/tps6586x.h>
 
+#include <mach/iomap.h>
 #include <mach/irqs.h>
 
 #include "board-harmony.h"
@@ -113,6 +114,16 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
 
 int __init harmony_regulator_init(void)
 {
+	void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
+	u32 pmc_ctrl;
+
+	/*
+	 * Configure the power management controller to trigger PMU
+	 * interrupts when low
+	 */
+	pmc_ctrl = readl(pmc + PMC_CTRL);
+	writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
+
 	i2c_register_board_info(3, harmony_regulators, 1);
 
 	return 0;

arch/arm/mach-tegra/board-paz00-pinmux.c

@@ -20,6 +20,7 @@
 
 #include "gpio-names.h"
 #include "board-paz00.h"
+#include "devices.h"
 
 static struct tegra_pingroup_config paz00_pinmux[] = {
 	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@ static struct tegra_pingroup_config paz00_pinmux[] = {
 	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 };
 
+static struct platform_device *pinmux_devices[] = {
+	&tegra_gpio_device,
+	&tegra_pinmux_device,
+};
+
 static struct tegra_gpio_table gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD1_CD,	.enable = true },
 	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
@@ -149,6 +155,8 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void paz00_pinmux_init(void)
 {
+	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));