msm: gpio: Remove tlmm routines obsoleted by gpiomux.

Now that all supported gpio_tlmm_config-using boards
are using gpiomux, remove the deprecated code.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

arch/arm/mach-msm/Makefile

@@ -3,7 +3,6 @@ obj-y += io.o idle.o timer.o dma.o
 obj-y += vreg.o
 obj-y += acpuclock-arm11.o
 obj-y += clock.o clock-pcom.o
-obj-y += gpio.o
 
 ifdef CONFIG_MSM_VIC
 obj-y += irq-vic.o

arch/arm/mach-msm/include/mach/gpio.h

@@ -23,127 +23,4 @@
 #define gpio_cansleep   __gpio_cansleep
 #define gpio_to_irq     __gpio_to_irq
 
-/**
- * struct msm_gpio - GPIO pin description
- * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
- * @label - textual label
- *
- * Usually, GPIO's are operated by sets.
- * This struct accumulate all GPIO information in single source
- * and facilitete group operations provided by msm_gpios_xxx()
- */
-struct msm_gpio {
-	u32 gpio_cfg;
-	const char *label;
-};
-
-/**
- * msm_gpios_request_enable() - request and enable set of GPIOs
- *
- * Request and configure set of GPIO's
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_request_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable_free() - disable and free set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_disable_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_request() - request set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_request(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_free() - free set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_enable() - enable set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable() - disable set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_disable(const struct msm_gpio *table, int size);
-
-/* GPIO TLMM (Top Level Multiplexing) Definitions */
-
-/* GPIO TLMM: Function -- GPIO specific */
-
-/* GPIO TLMM: Direction */
-enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-};
-
-/* GPIO TLMM: Pullup/Pulldown */
-enum {
-	GPIO_NO_PULL,
-	GPIO_PULL_DOWN,
-	GPIO_KEEPER,
-	GPIO_PULL_UP,
-};
-
-/* GPIO TLMM: Drive Strength */
-enum {
-	GPIO_2MA,
-	GPIO_4MA,
-	GPIO_6MA,
-	GPIO_8MA,
-	GPIO_10MA,
-	GPIO_12MA,
-	GPIO_14MA,
-	GPIO_16MA,
-};
-
-enum {
-	GPIO_ENABLE,
-	GPIO_DISABLE,
-};
-
-#define GPIO_CFG(gpio, func, dir, pull, drvstr) \
-	((((gpio) & 0x3FF) << 4)        |	  \
-	 ((func) & 0xf)                  |	  \
-	 (((dir) & 0x1) << 14)           |	  \
-	 (((pull) & 0x3) << 15)          |	  \
-	 (((drvstr) & 0xF) << 17))
-
-/**
- * extract GPIO pin from bit-field used for gpio_tlmm_config
- */
-#define GPIO_PIN(gpio_cfg)    (((gpio_cfg) >>  4) & 0x3ff)
-#define GPIO_FUNC(gpio_cfg)   (((gpio_cfg) >>  0) & 0xf)
-#define GPIO_DIR(gpio_cfg)    (((gpio_cfg) >> 14) & 0x1)
-#define GPIO_PULL(gpio_cfg)   (((gpio_cfg) >> 15) & 0x3)
-#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf)
-
-int gpio_tlmm_config(unsigned config, unsigned disable);
-
 #endif /* __ASM_ARCH_MSM_GPIO_H */