---

yaml --- r: 349748 b: refs/heads/master c: cfa82e0 h: refs/heads/master v: v3
git-mirror · Feb 11, 2013 · 113a540 · 113a540
1 parent 6a456c9
commit 113a540
Show file tree

Hide file tree

Showing 1,019 changed files with 10,183 additions and 6,684 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: edb27228db22654a59711135a5f7a20fb49a1016
+refs/heads/master: cfa82e020bc0be6ab9a1e3c186fe41f1e5cecf7a
diff --git a/trunk/Documentation/device-mapper/dm-raid.txt b/trunk/Documentation/device-mapper/dm-raid.txt
@@ -141,3 +141,4 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
+1.3.2   Fix/improve redundancy checking for RAID10
diff --git a/trunk/Documentation/devicetree/bindings/clock/imx23-clock.txt b/trunk/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006c000 {

diff --git a/trunk/Documentation/devicetree/bindings/clock/imx25-clock.txt b/trunk/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };
 
 uart1: serial@43f90000 {

diff --git a/trunk/Documentation/devicetree/bindings/clock/imx28-clock.txt b/trunk/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006a000 {

diff --git a/trunk/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/trunk/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };
 
 uart1: serial@02020000 {

diff --git a/trunk/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/trunk/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -13,10 +28,9 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
-
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };
diff --git a/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -81,7 +81,8 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
 		};
 	};
 };

diff --git a/trunk/Documentation/filesystems/f2fs.txt b/trunk/Documentation/filesystems/f2fs.txt
@@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                             align with the zone size <-|
                  |-> align with the segment size
      _________________________________________________________________________
-    |            |            |    Node     |   Segment   |   Segment  |      |
-    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
+    |            |            |   Segment   |    Node     |   Segment  |      |
+    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
     |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                        .      .
                                                              .                .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
  : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
    inode lists, and summary entries of current active segments.
 
-- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
-   Main area.
-
 - Segment Information Table (SIT)
  : It contains segment information such as valid block count and bitmap for the
    validity of all the blocks.
 
+- Node Address Table (NAT)
+ : It is composed of a block address table for all the node blocks stored in
+   Main area.
+
 - Segment Summary Area (SSA)
  : It contains summary entries which contains the owner information of all the
    data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.
 
   +--------+----------+---------+
-  |   CP   |    NAT   |   SIT   |
+  |   CP   |    SIT   |   NAT   |
   +--------+----------+---------+
   .         .          .          .
   .            .              .              .
   .               .                 .                 .
   +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
   +-------+-------+--------+--------+--------+--------+
      |             ^                          ^
      |             |                          |

diff --git a/trunk/Documentation/hid/hid-sensor.txt b/trunk/Documentation/hid/hid-sensor.txt
diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocbs_poll	[KNL,BOOT]
+	rcu_nocb_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt
@@ -57,6 +57,10 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
+Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
+	 	to struct boot_params for for loading bzImage and ramdisk
+		above 4G in 64bit.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -182,7 +186,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	N/A	pad3		Unused
+0236/2	2.12+	xloadflags	Boot protocol option flags
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -582,6 +586,27 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
+Field name:     xloadflags
+Type:           read
+Offset/size:    0x236/2
+Protocol:       2.12+
+
+  This field is a bitmask.
+
+  Bit 0 (read):	XLF_KERNEL_64
+	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
+
+  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
+        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
+
+  Bit 2 (read):	XLF_EFI_HANDOVER_32
+	- If 1, the kernel supports the 32-bit EFI handoff entry point
+          given at handover_offset.
+
+  Bit 3 (read): XLF_EFI_HANDOVER_64
+	- If 1, the kernel supports the 64-bit EFI handoff entry point
+          given at handover_offset + 0x200.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

diff --git a/trunk/Documentation/x86/zero-page.txt b/trunk/Documentation/x86/zero-page.txt
@@ -19,6 +19,9 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
+0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
+0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
+0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -27,6 +30,7 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
+1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -228,7 +228,7 @@ S:	Maintained
 F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-M:	Joey Lee <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
@@ -648,7 +648,7 @@ F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	MAINTAINED
+S:	Maintained
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://avr32linux.org/
+W:	http://mirror.egtvedt.no/avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/
@@ -1972,9 +1972,9 @@ S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Supported
+S:	Odd Fixes
 F:	sound/soc/codecs/cs4270*
 
 CLEANCACHE API
@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3191,9 +3191,9 @@ F:	include/uapi/video/
 F:	include/uapi/linux/fb.h
 
 FREESCALE DIU FRAMEBUFFER DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linux-fbdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/video/fsl-diu-fb.*
 
 FREESCALE DMA DRIVER
@@ -3228,9 +3228,8 @@ F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Orphan
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
@@ -3249,16 +3248,16 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
@@ -4906,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5085,7 +5084,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
 MSI LAPTOP SUPPORT
-M:	"Lee, Chun-Yi" <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
@@ -5181,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@vyatta.com>
+M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -5515,8 +5514,7 @@ M:	Benoît Cousson <b-cousson@ti.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod.c
-F:	arch/arm/plat-omap/include/plat/omap_hwmod.h
+F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
 M:	Benoît Cousson <b-cousson@ti.com>
@@ -6587,7 +6585,7 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/s3c_camif.h
 
 SERIAL DRIVERS
-M:	Alan Cox <alan@linux.intel.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial
@@ -7090,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lrg@ti.com>
+M:	Liam Girdwood <lgirdwood@gmail.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -7342,7 +7340,7 @@ S:	Odd Fixes
 F:	drivers/staging/speakup/
 
 STAGING - TI DSP BRIDGE DRIVERS
-M:	Omar Ramirez Luna <omar.ramirez@ti.com>
+M:	Omar Ramirez Luna <omar.ramirez@copitl.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/
 
@@ -8534,7 +8532,7 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 X86 PLATFORM DRIVERS
-M:	Matthew Garrett <mjg@redhat.com>
+M:	Matthew Garrett <matthew.garrett@nebula.com>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
 S:	Maintained