---

yaml
---
r: 80998
b: refs/heads/master
c: b242a60
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e1fd18656c2963e383d67b7006c0e06c9c1d9c79
+refs/heads/master: b242a60206881559bb3102110048762422e6b74e

trunk/Documentation/networking/bonding.txt

@@ -554,6 +554,30 @@ xmit_hash_policy
 
 		This algorithm is 802.3ad compliant.
 
+	layer2+3
+
+		This policy uses a combination of layer2 and layer3
+		protocol information to generate the hash.
+
+		Uses XOR of hardware MAC addresses and IP addresses to
+		generate the hash.  The formula is
+
+		(((source IP XOR dest IP) AND 0xffff) XOR
+			( source MAC XOR destination MAC ))
+				modulo slave count
+
+		This algorithm will place all traffic to a particular
+		network peer on the same slave.  For non-IP traffic,
+		the formula is the same as for the layer2 transmit
+		hash policy.
+
+		This policy is intended to provide a more balanced
+		distribution of traffic than layer2 alone, especially
+		in environments where a layer3 gateway device is
+		required to reach most destinations.
+
+		This algorithm is 802.3ad complient.
+
 	layer3+4
 
 		This policy uses upper layer protocol information,
@@ -589,8 +613,9 @@ xmit_hash_policy
 		or may not tolerate this noncompliance.
 
 	The default value is layer2.  This option was added in bonding
-version 2.6.3.  In earlier versions of bonding, this parameter does
-not exist, and the layer2 policy is the only policy.
+	version 2.6.3.  In earlier versions of bonding, this parameter
+	does not exist, and the layer2 policy is the only policy.  The
+	layer2+3 value was added for bonding version 3.2.2.
 
 
 3. Configuring Bonding Devices

trunk/MAINTAINERS

@@ -1681,8 +1681,7 @@ S:	Maintained
 HARMONY SOUND DRIVER
 P:	Kyle McMartin
 M:	kyle@parisc-linux.org
-W:	http://www.parisc-linux.org/~kyle/harmony/
-L:	parisc-linux@lists.parisc-linux.org
+L:	linux-parisc@vger.kernel.org
 S:	Maintained
 
 HAYES ESP SERIAL DRIVER
@@ -2173,7 +2172,7 @@ S:	Maintained
 
 KDUMP
 P:	Vivek Goyal
-M:	vgoyal@in.ibm.com
+M:	vgoyal@redhat.com
 P:	Haren Myneni
 M:	hbabu@us.ibm.com
 L:	kexec@lists.infradead.org
@@ -2598,13 +2597,6 @@ L:	https://tango.0pointer.de/mailman/listinfo/s270-linux
 W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 
-MTRR AND SIMILAR SUPPORT [i386]
-P:	Richard Gooch
-M:	rgooch@atnf.csiro.au
-L:	linux-kernel@vger.kernel.org
-W:	http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
-S:	Maintained
-
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 P:	Pierre Ossman
 M:	drzeus-mmc@drzeus.cx
@@ -2897,16 +2889,15 @@ W:	http://www.torque.net/linux-pp.html
 S:	Maintained
 
 PARISC ARCHITECTURE
+P:	Kyle McMartin
+M:	kyle@parisc-linux.org
 P:	Matthew Wilcox
 M:	matthew@wil.cx
 P:	Grant Grundler
 M:	grundler@parisc-linux.org
-P:	Kyle McMartin
-M:	kyle@parisc-linux.org
-L:	parisc-linux@parisc-linux.org
+L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
-T:	cvs cvs.parisc-linux.org:/var/cvs/linux-2.6
 S:	Maintained
 
 PARAVIRT_OPS INTERFACE

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 24
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Arr Matey! A Hairy Bilge Rat!
 
 # *DOCUMENTATION*

trunk/arch/avr32/Kconfig

@@ -6,8 +6,7 @@
 mainmenu "Linux Kernel Configuration"
 
 config AVR32
-	bool
-	default y
+	def_bool y
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
@@ -20,51 +19,49 @@ config AVR32
 	  http://avr32linux.org/.
 
 config GENERIC_GPIO
-	bool
-	default y
+	def_bool y
 
 config GENERIC_HARDIRQS
-	bool
-	default y
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
 
 config HARDIRQS_SW_RESEND
-	bool
-	default y
+	def_bool y
 
 config GENERIC_IRQ_PROBE
-	bool
-	default y
+	def_bool y
 
 config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
+	def_bool y
 
 config GENERIC_TIME
-	bool
-	default y
+	def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
-	bool
+	def_bool n
 
 config ARCH_HAS_ILOG2_U32
-	bool
-	default n
+	def_bool n
 
 config ARCH_HAS_ILOG2_U64
-	bool
-	default n
+	def_bool n
 
 config GENERIC_HWEIGHT
-	bool
-	default y
+	def_bool y
 
 config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
+	def_bool y
 
 config GENERIC_BUG
-	bool
-	default y
+	def_bool y
 	depends on BUG
 
 source "init/Kconfig"
@@ -139,28 +136,22 @@ config PHYS_OFFSET
 source "kernel/Kconfig.preempt"
 
 config HAVE_ARCH_BOOTMEM_NODE
-	bool
-	default n
+	def_bool n
 
 config ARCH_HAVE_MEMORY_PRESENT
-	bool
-	default n
+	def_bool n
 
 config NEED_NODE_MEMMAP_SIZE
-	bool
-	default n
+	def_bool n
 
 config ARCH_FLATMEM_ENABLE
-	bool
-	default y
+	def_bool y
 
 config ARCH_DISCONTIGMEM_ENABLE
-	bool
-	default n
+	def_bool n
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
-	default n
+	def_bool n
 
 source "mm/Kconfig"
 

trunk/arch/avr32/kernel/Makefile

@@ -11,3 +11,4 @@ obj-y				+= signal.o sys_avr32.o process.o time.o
 obj-y				+= init_task.o switch_to.o cpu.o
 obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o

trunk/arch/avr32/kernel/asm-offsets.c

@@ -21,5 +21,7 @@ void foo(void)
 	OFFSET(TI_flags, thread_info, flags);
 	OFFSET(TI_cpu, thread_info, cpu);
 	OFFSET(TI_preempt_count, thread_info, preempt_count);
+	OFFSET(TI_rar_saved, thread_info, rar_saved);
+	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
 }