---

yaml
---
r: 292546
b: refs/heads/master
c: 2d87e06
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b5594a7760fa048730db64c501cf4534df06b3b3
+refs/heads/master: 2d87e06e7477fa1467e730087b68c2f518c0fff6

trunk/Documentation/powerpc/mpc52xx.txt

@@ -2,31 +2,31 @@ Linux 2.6.x on MPC52xx family
 -----------------------------
 
 For the latest info, go to http://www.246tNt.com/mpc52xx/
- 
+
 To compile/use :
 
   - U-Boot:
      # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
         if you wish to ).
      # make lite5200_defconfig
      # make uImage
-    
+
      then, on U-boot:
      => tftpboot 200000 uImage
      => tftpboot 400000 pRamdisk
      => bootm 200000 400000
-    
+
   - DBug:
      # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
         if you wish to ).
      # make lite5200_defconfig
      # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
-     # make zImage.initrd 
-     # make 
+     # make zImage.initrd
+     # make
 
      then in DBug:
      DBug> dn -i zImage.initrd.lite5200
-     
+
 
 Some remarks :
  - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100

trunk/arch/powerpc/boot/dts/a4m072.dts

@@ -0,0 +1,168 @@
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			fsl,init-ext-48mhz-en = <0x0>;
+			fsl,init-fd-enable = <0x01>;
+			fsl,init-fd-counters = <0x3333>;
+		};
+
+		timer@600 {
+			fsl,has-wdt;
+		};
+
+		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};

trunk/arch/powerpc/configs/mpc5200_defconfig

@@ -1,8 +1,8 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -13,15 +13,12 @@ CONFIG_PPC_EFIKA=y
 CONFIG_PPC_LITE5200=y
 CONFIG_PPC_MEDIA5200=y
 CONFIG_PPC_MPC5200_BUGFIX=y
-CONFIG_PPC_MPC5200_GPIO=y
 CONFIG_PPC_MPC5200_LPBFIFO=m
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_BESTCOMM=y
 CONFIG_SIMPLE_GPIO=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -36,23 +33,20 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_UBI=m
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI_TGT=y
 CONFIG_BLK_DEV_SD=y
@@ -61,11 +55,10 @@ CONFIG_ATA=y
 CONFIG_PATA_MPC52xx=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_LXT_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_FEC_MPC52xx=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_AMD_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_FIXED_PHY=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
@@ -80,11 +73,17 @@ CONFIG_SPI_GPIO=m
 CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
 CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_SENSORS_LM80=y
+CONFIG_SENSORS_LM87=m
 CONFIG_WATCHDOG=y
+CONFIG_MFD_SM501=m
 CONFIG_DRM=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
+CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_RADEON=y
+CONFIG_FB_SM501=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
@@ -124,10 +123,11 @@ CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_PCF8563=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -145,5 +145,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

trunk/arch/powerpc/platforms/52xx/mpc5200_simple.c

@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anonymous,a4m072",
 	"anon,charon",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",

trunk/arch/powerpc/platforms/52xx/mpc52xx_common.c

@@ -98,13 +98,11 @@ struct mpc52xx_gpio_wkup __iomem *wkup_gpio;
  *					of the localplus bus to the of_platform
  *					bus.
  */
-void __init
-mpc52xx_declare_of_platform_devices(void)
+void __init mpc52xx_declare_of_platform_devices(void)
 {
-	/* Find every child of the SOC node and add it to of_platform */
-	if (of_platform_bus_probe(NULL, mpc52xx_bus_ids, NULL))
-		printk(KERN_ERR __FILE__ ": "
-			"Error while probing of_platform bus\n");
+	/* Find all the 'platform' devices and register them. */
+	if (of_platform_populate(NULL, mpc52xx_bus_ids, NULL, NULL))
+		pr_err(__FILE__ ": Error while populating devices from DT\n");
 }
 
 /*