---

yaml --- r: 311543 b: refs/heads/master c: 9973290 h: refs/heads/master i: 311541: 74e3fe8 311539: 8c11700 311535: 5f1bec5 v: v3
git-mirror · Jun 22, 2012 · 12ccbd6 · 12ccbd6
1 parent 7246121
commit 12ccbd6
Show file tree

Hide file tree

Showing 336 changed files with 1,448 additions and 2,227 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6887a4131da3adaab011613776d865f4bcfb5678
+refs/heads/master: 9973290ce20ace7cac8ad06f753468c0b826fd0f
diff --git a/trunk/Documentation/DocBook/media/v4l/pixfmt.xml b/trunk/Documentation/DocBook/media/v4l/pixfmt.xml
@@ -986,13 +986,13 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
 	  <row id="V4L2-PIX-FMT-Y4">
 	    <entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
 	    <entry>'Y04 '</entry>
-	    <entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
+	    <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
 the other bits are set to 0.</entry>
 	  </row>
 	  <row id="V4L2-PIX-FMT-Y6">
 	    <entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
 	    <entry>'Y06 '</entry>
-	    <entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
+	    <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
 the other bits are set to 0.</entry>
 	  </row>
 	</tbody>

diff --git a/trunk/Documentation/DocBook/media/v4l/v4l2.xml b/trunk/Documentation/DocBook/media/v4l/v4l2.xml
@@ -560,14 +560,14 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-tuner;
     &sub-log-status;
     &sub-overlay;
-    &sub-prepare-buf;
     &sub-qbuf;
     &sub-querybuf;
     &sub-querycap;
     &sub-queryctrl;
     &sub-query-dv-preset;
     &sub-query-dv-timings;
     &sub-querystd;
+    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;

diff --git a/trunk/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/trunk/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -108,9 +108,10 @@ information.</para>
 /></entry>
 	  </row>
 	  <row>
-	    <entry>struct&nbsp;v4l2_format</entry>
+	    <entry>__u32</entry>
 	    <entry><structfield>format</structfield></entry>
-	    <entry>Filled in by the application, preserved by the driver.</entry>
+	    <entry>Filled in by the application, preserved by the driver.
+	    See <xref linkend="v4l2-format" />.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>

diff --git a/trunk/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/trunk/Documentation/DocBook/media/v4l/vidioc-dqevent.xml
@@ -89,7 +89,7 @@
 	  <row>
 	    <entry></entry>
 	    <entry>&v4l2-event-frame-sync;</entry>
-            <entry><structfield>frame_sync</structfield></entry>
+            <entry><structfield>frame</structfield></entry>
 	    <entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
 	  </row>
 	  <row>

diff --git a/trunk/Documentation/stable_kernel_rules.txt b/trunk/Documentation/stable_kernel_rules.txt
@@ -12,12 +12,6 @@ Rules on what kind of patches are accepted, and which ones are not, into the
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
- - Serious issues as reported by a user of a distribution kernel may also
-   be considered if they fix a notable performance or interactivity issue.
-   As these fixes are not as obvious and have a higher risk of a subtle
-   regression they should only be submitted by a distribution kernel
-   maintainer and include an addendum linking to a bugzilla entry if it
-   exists and additional information on the user-visible impact.
  - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -589,7 +589,6 @@ config ARCH_ORION5X
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_IO_H
 	select PLAT_ORION
 	help
 	  Support for the following Marvell Orion 5x series SoCs:

diff --git a/trunk/arch/arm/boot/dts/omap2.dtsi b/trunk/arch/arm/boot/dts/omap2.dtsi
@@ -44,8 +44,6 @@
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			ti,intc-size = <96>;
-			reg = <0x480FE000 0x1000>;
 		};
 
 		uart1: serial@4806a000 {

diff --git a/trunk/arch/arm/kernel/vmlinux.lds.S b/trunk/arch/arm/kernel/vmlinux.lds.S
@@ -183,7 +183,9 @@ SECTIONS
 	}
 #endif
 
+#ifdef CONFIG_SMP
 	PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
 
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */

diff --git a/trunk/arch/arm/mach-exynos/Kconfig b/trunk/arch/arm/mach-exynos/Kconfig
@@ -212,7 +212,7 @@ config MACH_SMDKV310
 	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS_DEV_DMA
+	select EXYNOS4_DEV_DMA
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
@@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
+	select EXYNOS4_DEV_DMA
 	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -303,7 +303,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS_DEV_DMA
+	select EXYNOS4_DEV_DMA
 	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -341,7 +341,7 @@ config MACH_ORIGEN
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI

diff --git a/trunk/arch/arm/mach-imx/clk-imx6q.c b/trunk/arch/arm/mach-imx/clk-imx6q.c
@@ -152,14 +152,13 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom,
-	clk_max
+	ssi2_ipg, ssi3_ipg, clk_max
 };
 
 static struct clk *clk[clk_max];
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
-	mmdc_ch0_axi, rom,
+	mmdc_ch0_axi, mmdc_ch1_axi,
 };
 
 int __init mx6q_clocks_init(void)
@@ -365,7 +364,6 @@ int __init mx6q_clocks_init(void)
 	clk[gpmi_bch]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
 	clk[gpmi_io]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
 	clk[gpmi_apb]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
-	clk[rom]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);

diff --git a/trunk/arch/arm/mach-kirkwood/board-iconnect.c b/trunk/arch/arm/mach-kirkwood/board-iconnect.c
@@ -20,6 +20,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>

diff --git a/trunk/arch/arm/mach-kirkwood/common.c b/trunk/arch/arm/mach-kirkwood/common.c
@@ -159,7 +159,6 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
 	gate_fn->gate.flags = clk_gate_flags;
 	gate_fn->gate.lock = lock;
 	gate_fn->gate.hw.init = &init;
-	gate_fn->fn = fn;
 
 	/* ops is the gate ops, but with our disable function */
 	if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {

diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/trunk/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -38,7 +38,6 @@
 #define IRQ_MASK_HIGH_OFF	0x0014
 
 #define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
-#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE | 0x0300)
 
 #define L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
 #define L2_WRITETHROUGH		0x00000010

diff --git a/trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/trunk/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -80,7 +80,6 @@
 #define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
 
 #define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x20000)
 
 #define CRYPTO_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x30000)
 

diff --git a/trunk/arch/arm/mach-omap2/board-flash.c b/trunk/arch/arm/mach-omap2/board-flash.c
@@ -97,6 +97,11 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 
 	gpmc_onenand_init(&board_onenand_data);
 }
+#else
+void
+__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
+{
+}
 #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || \

diff --git a/trunk/arch/arm/mach-omap2/board-n8x0.c b/trunk/arch/arm/mach-omap2/board-n8x0.c
@@ -83,9 +83,11 @@ static struct musb_hdrc_config musb_config = {
 };
 
 static struct musb_hdrc_platform_data tusb_data = {
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+#if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
-#else
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+	.mode		= MUSB_PERIPHERAL,
+#else /* defined(CONFIG_USB_MUSB_HOST) */
 	.mode		= MUSB_HOST,
 #endif
 	.set_power	= tusb_set_power,

diff --git a/trunk/arch/arm/mach-omap2/board-omap3beagle.c b/trunk/arch/arm/mach-omap2/board-omap3beagle.c
@@ -81,13 +81,13 @@ static u8 omap3_beagle_version;
 static struct {
 	int mmc1_gpio_wp;
 	int usb_pwr_level;
-	int dvi_pd_gpio;
+	int reset_gpio;
 	int usr_button_gpio;
 	int mmc_caps;
 } beagle_config = {
 	.mmc1_gpio_wp = -EINVAL,
 	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
-	.dvi_pd_gpio = -EINVAL,
+	.reset_gpio = 129,
 	.usr_button_gpio = 4,
 	.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 };
@@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void)
 		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
 		beagle_config.mmc1_gpio_wp = 29;
-		beagle_config.dvi_pd_gpio = 170;
+		beagle_config.reset_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 6:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
 		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.dvi_pd_gpio = 170;
+		beagle_config.reset_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 5:
 		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
 		beagle_config.mmc1_gpio_wp = 23;
-		beagle_config.dvi_pd_gpio = 170;
+		beagle_config.reset_gpio = 170;
 		beagle_config.usr_button_gpio = 7;
 		break;
 	case 0:
@@ -274,9 +274,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (r)
 			pr_err("%s: unable to configure nDVI_PWR_EN\n",
 				__func__);
-
-		beagle_config.dvi_pd_gpio = gpio + 2;
-
+		r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
+				     "DVI_LDO_EN");
+		if (r)
+			pr_err("%s: unable to configure DVI_LDO_EN\n",
+				__func__);
 	} else {
 		/*
 		 * REVISIT: need ehci-omap hooks for external VBUS
@@ -285,7 +287,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
 	}
-	dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+	dvi_panel.power_down_gpio = beagle_config.reset_gpio;
 
 	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
 			"nEN_USB_PWR");
@@ -497,7 +499,7 @@ static void __init omap3_beagle_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_init_rev();
 
-	if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
+	if (beagle_config.mmc1_gpio_wp != -EINVAL)
 		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
 	mmc[0].caps = beagle_config.mmc_caps;
 	omap_hsmmc_init(mmc);
@@ -508,13 +510,15 @@ static void __init omap3_beagle_init(void)
 
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
-	if (gpio_is_valid(beagle_config.dvi_pd_gpio))
-		omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
 	omap_display_init(&beagle_dss_data);
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+	/* REVISIT leave DVI powered down until it's needed ... */
+	gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
+
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,

diff --git a/trunk/arch/arm/mach-omap2/clock44xx_data.c b/trunk/arch/arm/mach-omap2/clock44xx_data.c
@@ -84,7 +84,6 @@ static struct clk slimbus_clk = {
 
 static struct clk sys_32k_ck = {
 	.name		= "sys_32k_ck",
-	.clkdm_name	= "prm_clkdm",
 	.rate		= 32768,
 	.ops		= &clkops_null,
 };
@@ -513,7 +512,6 @@ static struct clk ddrphy_ck = {
 	.name		= "ddrphy_ck",
 	.parent		= &dpll_core_m2_ck,
 	.ops		= &clkops_null,
-	.clkdm_name	= "l3_emif_clkdm",
 	.fixed_div	= 2,
 	.recalc		= &omap_fixed_divisor_recalc,
 };
@@ -771,7 +769,6 @@ static const struct clksel dpll_mpu_m2_div[] = {
 static struct clk dpll_mpu_m2_ck = {
 	.name		= "dpll_mpu_m2_ck",
 	.parent		= &dpll_mpu_ck,
-	.clkdm_name	= "cm_clkdm",
 	.clksel		= dpll_mpu_m2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_MPU,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -1152,7 +1149,6 @@ static const struct clksel l3_div_div[] = {
 static struct clk l3_div_ck = {
 	.name		= "l3_div_ck",
 	.parent		= &div_core_ck,
-	.clkdm_name	= "cm_clkdm",
 	.clksel		= l3_div_div,
 	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
 	.clksel_mask	= OMAP4430_CLKSEL_L3_MASK,
@@ -2828,7 +2824,6 @@ static const struct clksel trace_clk_div_div[] = {
 static struct clk trace_clk_div_ck = {
 	.name		= "trace_clk_div_ck",
 	.parent		= &pmd_trace_clk_mux_ck,
-	.clkdm_name	= "emu_sys_clkdm",
 	.clksel		= trace_clk_div_div,
 	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
@@ -3417,12 +3412,9 @@ int __init omap4xxx_clk_init(void)
 	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
 		cpu_clkflg = CK_443X;
-	} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
+	} else if (cpu_is_omap446x()) {
 		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
 		cpu_clkflg = CK_446X | CK_443X;
-
-		if (cpu_is_omap447x())
-			pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
 	} else {
 		return 0;
 	}

diff --git a/trunk/arch/arm/mach-omap2/cm.h b/trunk/arch/arm/mach-omap2/cm.h
@@ -22,15 +22,4 @@
  */
 #define MAX_MODULE_READY_TIME		2000
 
-/*
- * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
- * the PRCM to request that a module enter the inactive state in the
- * case of OMAP2 & 3.  In the case of OMAP4 this is the max duration
- * in microseconds for the module to reach the inactive state from
- * a functional state.
- * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
- * kernel init.
- */
-#define MAX_MODULE_DISABLE_TIME		5000
-
 #endif