---

yaml
---
r: 174090
b: refs/heads/master
c: a15c7b4
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c1426df678c5e9a095ff40285ff3d698d0d25658
+refs/heads/master: a15c7b42b2b8eda719920e93b81be031f2e0b01b

trunk/drivers/media/dvb/frontends/Kconfig

@@ -342,6 +342,13 @@ config DVB_AF9013
 	help
 	  Say Y when you want to support this frontend.
 
+config DVB_EC100
+	tristate "E3C EC100"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  Say Y when you want to support this frontend.
+
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 

trunk/drivers/media/dvb/frontends/Makefile

@@ -76,3 +76,4 @@ obj-$(CONFIG_DVB_STV0900) += stv0900.o
 obj-$(CONFIG_DVB_STV090x) += stv090x.o
 obj-$(CONFIG_DVB_STV6110x) += stv6110x.o
 obj-$(CONFIG_DVB_ISL6423) += isl6423.o
+obj-$(CONFIG_DVB_EC100) += ec100.o

trunk/drivers/media/dvb/frontends/ec100.c

@@ -0,0 +1,335 @@
+/*
+ * E3C EC100 demodulator driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "dvb_frontend.h"
+#include "ec100_priv.h"
+#include "ec100.h"
+
+int ec100_debug;
+module_param_named(debug, ec100_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+struct ec100_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct ec100_config config;
+
+	u16 ber;
+};
+
+/* write single register */
+static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val)
+{
+	u8 buf[2] = {reg, val};
+	struct i2c_msg msg = {
+		.addr = state->config.demod_address,
+		.flags = 0,
+		.len = 2,
+		.buf = buf};
+
+	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+		warn("I2C write failed reg:%02x", reg);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* read single register */
+static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val)
+{
+	struct i2c_msg msg[2] = {
+		{
+			.addr = state->config.demod_address,
+			.flags = 0,
+			.len = 1,
+			.buf = &reg
+		}, {
+			.addr = state->config.demod_address,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = val
+		}
+	};
+
+	if (i2c_transfer(state->i2c, msg, 2) != 2) {
+		warn("I2C read failed reg:%02x", reg);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int ec100_set_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *params)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp, tmp2;
+
+	deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency,
+		params->u.ofdm.bandwidth);
+
+	/* program tuner */
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, params);
+
+	ret = ec100_write_reg(state, 0x04, 0x06);
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x67, 0x58);
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x05, 0x18);
+	if (ret)
+		goto error;
+
+	/* reg/bw |   6  |   7  |   8
+	   -------+------+------+------
+	   A 0x1b | 0xa1 | 0xe7 | 0x2c
+	   A 0x1c | 0x55 | 0x63 | 0x72
+	   -------+------+------+------
+	   B 0x1b | 0xb7 | 0x00 | 0x49
+	   B 0x1c | 0x55 | 0x64 | 0x72 */
+
+	switch (params->u.ofdm.bandwidth) {
+	case BANDWIDTH_6_MHZ:
+		tmp = 0xb7;
+		tmp2 = 0x55;
+		break;
+	case BANDWIDTH_7_MHZ:
+		tmp = 0x00;
+		tmp2 = 0x64;
+		break;
+	case BANDWIDTH_8_MHZ:
+	default:
+		tmp = 0x49;
+		tmp2 = 0x72;
+	}
+
+	ret = ec100_write_reg(state, 0x1b, tmp);
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x1c, tmp2);
+	if (ret)
+		goto error;
+
+	ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */
+	if (ret)
+		goto error;
+
+	ret = ec100_write_reg(state, 0x08, 0x24);
+	if (ret)
+		goto error;
+
+	ret = ec100_write_reg(state, 0x00, 0x00); /* go */
+	if (ret)
+		goto error;
+	ret = ec100_write_reg(state, 0x00, 0x20); /* go */
+	if (ret)
+		goto error;
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_get_tune_settings(struct dvb_frontend *fe,
+	struct dvb_frontend_tune_settings *fesettings)
+{
+	fesettings->min_delay_ms = 300;
+	fesettings->step_size = 0;
+	fesettings->max_drift = 0;
+
+	return 0;
+}
+
+static int ec100_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp;
+	*status = 0;
+
+	ret = ec100_read_reg(state, 0x42, &tmp);
+	if (ret)
+		goto error;
+
+	if (tmp & 0x80) {
+		/* bit7 set - have lock */
+		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
+			FE_HAS_SYNC | FE_HAS_LOCK;
+	} else {
+		ret = ec100_read_reg(state, 0x01, &tmp);
+		if (ret)
+			goto error;
+
+		if (tmp & 0x10) {
+			/* bit4 set - have signal */
+			*status |= FE_HAS_SIGNAL;
+			if (!(tmp & 0x01)) {
+				/* bit0 clear - have ~valid signal */
+				*status |= FE_HAS_CARRIER |  FE_HAS_VITERBI;
+			}
+		}
+	}
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp, tmp2;
+	u16 ber2;
+
+	*ber = 0;
+
+	ret = ec100_read_reg(state, 0x65, &tmp);
+	if (ret)
+		goto error;
+	ret = ec100_read_reg(state, 0x66, &tmp2);
+	if (ret)
+		goto error;
+
+	ber2 = (tmp2 << 8) | tmp;
+
+	/* if counter overflow or clear */
+	if (ber2 < state->ber)
+		*ber = ber2;
+	else
+		*ber = ber2 - state->ber;
+
+	state->ber = ber2;
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	int ret;
+	u8 tmp;
+
+	ret = ec100_read_reg(state, 0x24, &tmp);
+	if (ret) {
+		*strength = 0;
+		goto error;
+	}
+
+	*strength = ((tmp << 8) | tmp);
+
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
+}
+
+static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0;
+	return 0;
+}
+
+static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+static void ec100_release(struct dvb_frontend *fe)
+{
+	struct ec100_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops ec100_ops;
+
+struct dvb_frontend *ec100_attach(const struct ec100_config *config,
+	struct i2c_adapter *i2c)
+{
+	int ret;
+	struct ec100_state *state = NULL;
+	u8 tmp;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->i2c = i2c;
+	memcpy(&state->config, config, sizeof(struct ec100_config));
+
+	/* check if the demod is there */
+	ret = ec100_read_reg(state, 0x33, &tmp);
+	if (ret || tmp != 0x0b)
+		goto error;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &ec100_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(ec100_attach);
+
+static struct dvb_frontend_ops ec100_ops = {
+	.info = {
+		.name = "E3C EC100 DVB-T",
+		.type = FE_OFDM,
+		.caps =
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 |
+			FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO |
+			FE_CAN_MUTE_TS
+	},
+
+	.release = ec100_release,
+	.set_frontend = ec100_set_frontend,
+	.get_tune_settings = ec100_get_tune_settings,
+	.read_status = ec100_read_status,
+	.read_ber = ec100_read_ber,
+	.read_signal_strength = ec100_read_signal_strength,
+	.read_snr = ec100_read_snr,
+	.read_ucblocks = ec100_read_ucblocks,
+};
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");