---

yaml --- r: 74187 b: refs/heads/master c: b242e89 h: refs/heads/master i: 74185: c017c8f 74183: f3d9553 v: v3
git-mirror · Nov 19, 2007 · 1366860 · 1366860
1 parent 9e28265
commit 1366860
Show file tree

Hide file tree

Showing 319 changed files with 3,698 additions and 5,712 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8912858bcb9e314549a4abc15db6b5841a96fa2c
+refs/heads/master: b242e891c218162cfbae064b1a9136cdbed5ee53
diff --git a/trunk/Documentation/lguest/lguest.c b/trunk/Documentation/lguest/lguest.c
@@ -1040,11 +1040,6 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 		/ getpagesize();
 	p = get_pages(pages);
 
-	/* Initialize the virtqueue */
-	vq->next = NULL;
-	vq->last_avail_idx = 0;
-	vq->dev = dev;
-
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
 	vq->config.irq = devices.next_irq++;
@@ -1062,6 +1057,9 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
 
+	/* Link virtqueue back to device. */
+	vq->dev = dev;
+
 	/* Set the routine to call when the Guest does something to this
 	 * virtqueue. */
 	vq->handle_output = handle_output;
@@ -1095,7 +1093,6 @@ static struct device *new_device(const char *name, u16 type, int fd,
 	dev->desc = new_dev_desc(type);
 	dev->handle_input = handle_input;
 	dev->name = name;
-	dev->vq = NULL;
 	return dev;
 }
 

diff --git a/trunk/Documentation/parport-lowlevel.txt b/trunk/Documentation/parport-lowlevel.txt
@@ -339,10 +339,6 @@ Use this function to register your device driver on a parallel port
 ('port').  Once you have done that, you will be able to use
 parport_claim and parport_release in order to use the port.
 
-The ('name') argument is the name of the device that appears in /proc
-filesystem. The string must be valid for the whole lifetime of the
-device (until parport_unregister_device is called).
-
 This function will register three callbacks into your driver:
 'preempt', 'wakeup' and 'irq'.  Each of these may be NULL in order to
 indicate that you do not want a callback.

diff --git a/trunk/Documentation/powerpc/booting-without-of.txt b/trunk/Documentation/powerpc/booting-without-of.txt
@@ -1645,9 +1645,8 @@ platforms are moved over to use the flattened-device-tree model.
      MAC addresses passed by the firmware when no information other
      than indices is available to associate an address with a device.
    - phy-connection-type : a string naming the controller/PHY interface type,
-     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
-     Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
-     "tbi", or "rtbi".
+     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
+     or "rtbi".
 
    Example:
 	ucc@2000 {

diff --git a/trunk/Documentation/thinkpad-acpi.txt b/trunk/Documentation/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.17
-                         October 04th, 2007
+                            Version 0.16
+                          August 2nd, 2007
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -923,34 +923,19 @@ sysfs backlight device "thinkpad_screen"
 This feature allows software control of the LCD brightness on ThinkPad
 models which don't have a hardware brightness slider.
 
-It has some limitations: the LCD backlight cannot be actually turned on or
-off by this interface, and in many ThinkPad models, the "dim while on
-battery" functionality will be enabled by the BIOS when this interface is
-used, and cannot be controlled.
-
-On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
-has eight brightness levels, ranging from 0 to 7.  Some of the levels
-may not be distinct.  Later Lenovo models that implement the ACPI
-display backlight brightness control methods have 16 levels, ranging
-from 0 to 15.
-
-There are two interfaces to the firmware for direct brightness control,
-EC and CMOS.  To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
-and CMOS.  The driver tries to autodetect which interface to use.
-
-When display backlight brightness controls are available through the
-standard ACPI interface, it is best to use it instead of this direct
-ThinkPad-specific interface.  The driver will disable its native
-backlight brightness control interface if it detects that the standard
-ACPI interface is available in the ThinkPad.
-
-The brightness_enable module parameter can be used to control whether
-the LCD brightness control feature will be enabled when available.
-brightness_enable=0 forces it to be disabled.  brightness_enable=1
-forces it to be enabled when available, even if the standard ACPI
-interface is also available.
+It has some limitations: the LCD backlight cannot be actually turned on or off
+by this interface, and in many ThinkPad models, the "dim while on battery"
+functionality will be enabled by the BIOS when this interface is used, and
+cannot be controlled.
+
+The backlight control has eight levels, ranging from 0 to 7.  Some of the
+levels may not be distinct.
+
+There are two interfaces to the firmware for brightness control, EC and CMOS.
+To select which one should be used, use the brightness_mode module parameter:
+brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode,
+brightness_mode=3 selects both EC and CMOS.  The driver tries to autodetect
+which interface to use.
 
 Procfs notes:
 
@@ -962,11 +947,11 @@ Procfs notes:
 
 Sysfs notes:
 
-The interface is implemented through the backlight sysfs class, which is
-poorly documented at this time.
+The interface is implemented through the backlight sysfs class, which is poorly
+documented at this time.
 
-Locate the thinkpad_screen device under /sys/class/backlight, and inside
-it there will be the following attributes:
+Locate the thinkpad_screen device under /sys/class/backlight, and inside it
+there will be the following attributes:
 
 	max_brightness:
 		Reads the maximum brightness the hardware can be set to.
@@ -976,19 +961,17 @@ it there will be the following attributes:
 		Reads what brightness the screen is set to at this instant.
 
 	brightness:
-		Writes request the driver to change brightness to the
-		given value.  Reads will tell you what brightness the
-		driver is trying to set the display to when "power" is set
-		to zero and the display has not been dimmed by a kernel
-		power management event.
+		Writes request the driver to change brightness to the given
+		value.  Reads will tell you what brightness the driver is trying
+		to set the display to when "power" is set to zero and the display
+		has not been dimmed by a kernel power management event.
 
 	power:
-		power management mode, where 0 is "display on", and 1 to 3
-		will dim the display backlight to brightness level 0
-		because thinkpad-acpi cannot really turn the backlight
-		off.  Kernel power management events can temporarily
-		increase the current power management level, i.e. they can
-		dim the display.
+		power management mode, where 0 is "display on", and 1 to 3 will
+		dim the display backlight to brightness level 0 because
+		thinkpad-acpi cannot really turn the backlight off.  Kernel
+		power management events can temporarily increase the current
+		power management level, i.e. they can dim the display.
 
 
 Volume control -- /proc/acpi/ibm/volume

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1914,8 +1914,10 @@ L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 
 IMS TWINTURBO FRAMEBUFFER DRIVER
+P:	Paul Mundt
+M:	lethal@chaoticdreams.org
 L:	linux-fbdev-devel@lists.sourceforge.net (subscribers-only)
-S:	Orphan
+S:	Maintained
 
 INFINIBAND SUBSYSTEM
 P:	Roland Dreier
@@ -2444,7 +2446,7 @@ M68K ON APPLE MACINTOSH
 P:	Joshua Thompson
 M:	funaho@jurai.org
 W:	http://www.mac.linux-m68k.org/
-L:	linux-m68k@lists.linux-m68k.org
+L:	linux-mac68k@mac.linux-m68k.org
 S:	Maintained
 
 M68K ON HP9000/300
@@ -3634,12 +3636,18 @@ M:	laredo@gnu.org
 W:	http://www.stradis.com/
 S:	Maintained
 
-SUPERH
+SUPERH (sh)
+P:	Paul Mundt
+M:	lethal@linux-sh.org
+L:	linuxsh-dev@lists.sourceforge.net (subscribers-only)
+W:	http://www.linux-sh.org
+S:	Maintained
+
+SUPERH64 (sh64)
 P:	Paul Mundt
 M:	lethal@linux-sh.org
-L:	linux-sh@vger.kernel.org
+L:	linuxsh-shmedia-dev@lists.sourceforge.net
 W:	http://www.linux-sh.org
-T:	git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
 S:	Maintained
 
 SUN3/3X