Merge branch 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/tj/libata

Pull libata changes from Tejun Heo:
 "Nothing too interesting.  Only two minor fixes in libata core.  Most
  changes are specific to hardware which isn't too common"

* 'for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: Add Device IDs for Intel Wildcat Point-LP
  sata_rcar: Convert to clk_prepare/unprepare
  drivers/libata: Set max sector to 65535 for Slimtype DVD A DS8A9SH drive
  libata: Add some missing command descriptions
  sata_highbank: clear whole array in highbank_initialize_phys()
  ahci: disabled FBS prior to issuing software reset
  libata: Fix display of sata speed
  ahci: imx: setup power saving methods
  ata_piix: minor typo and a printk fix
  ahci: Changing two module params with static and __read_mostly

drivers/ata/ahci.c

@@ -292,6 +292,10 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */
+	{ PCI_VDEVICE(INTEL, 0x9c83), board_ahci }, /* Wildcat Point-LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
+	{ PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

drivers/ata/ahci.h

@@ -339,6 +339,7 @@ extern struct device_attribute *ahci_sdev_attrs[];
 	.sdev_attrs		= ahci_sdev_attrs
 
 extern struct ata_port_operations ahci_ops;
+extern struct ata_port_operations ahci_platform_ops;
 extern struct ata_port_operations ahci_pmp_retry_srst_ops;
 
 unsigned int ahci_dev_classify(struct ata_port *ap);
@@ -368,6 +369,7 @@ irqreturn_t ahci_hw_interrupt(int irq, void *dev_instance);
 irqreturn_t ahci_thread_fn(int irq, void *dev_instance);
 void ahci_print_info(struct ata_host *host, const char *scc_s);
 int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis);
+void ahci_error_handler(struct ata_port *ap);
 
 static inline void __iomem *__ahci_port_base(struct ata_host *host,
 					     unsigned int port_no)

drivers/ata/ahci_imx.c

@@ -1,6 +1,6 @@
 /*
+ * copyright (c) 2013 Freescale Semiconductor, Inc.
  * Freescale IMX AHCI SATA platform driver
- * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
  *
@@ -25,17 +25,70 @@
 #include <linux/of_device.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/libata.h>
 #include "ahci.h"
 
 enum {
-	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+	PORT_PHY_CTL = 0x178,			/* Port0 PHY Control */
+	PORT_PHY_CTL_PDDQ_LOC = 0x100000,	/* PORT_PHY_CTL bits */
+	HOST_TIMER1MS = 0xe0,			/* Timer 1-ms */
 };
 
 struct imx_ahci_priv {
 	struct platform_device *ahci_pdev;
 	struct clk *sata_ref_clk;
 	struct clk *ahb_clk;
 	struct regmap *gpr;
+	bool no_device;
+	bool first_time;
+};
+
+static int ahci_imx_hotplug;
+module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
+MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
+
+static void ahci_imx_error_handler(struct ata_port *ap)
+{
+	u32 reg_val;
+	struct ata_device *dev;
+	struct ata_host *host = dev_get_drvdata(ap->dev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	struct imx_ahci_priv *imxpriv = dev_get_drvdata(ap->dev->parent);
+
+	ahci_error_handler(ap);
+
+	if (!(imxpriv->first_time) || ahci_imx_hotplug)
+		return;
+
+	imxpriv->first_time = false;
+
+	ata_for_each_dev(dev, &ap->link, ENABLED)
+		return;
+	/*
+	 * Disable link to save power.  An imx ahci port can't be recovered
+	 * without full reset once the pddq mode is enabled making it
+	 * impossible to use as part of libata LPM.
+	 */
+	reg_val = readl(mmio + PORT_PHY_CTL);
+	writel(reg_val | PORT_PHY_CTL_PDDQ_LOC, mmio + PORT_PHY_CTL);
+	regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+			IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+			!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+	clk_disable_unprepare(imxpriv->sata_ref_clk);
+	imxpriv->no_device = true;
+}
+
+static struct ata_port_operations ahci_imx_ops = {
+	.inherits	= &ahci_platform_ops,
+	.error_handler	= ahci_imx_error_handler,
+};
+
+static const struct ata_port_info ahci_imx_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_imx_ops,
 };
 
 static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
@@ -117,9 +170,51 @@ static void imx6q_sata_exit(struct device *dev)
 	clk_disable_unprepare(imxpriv->sata_ref_clk);
 }
 
+static int imx_ahci_suspend(struct device *dev)
+{
+	struct imx_ahci_priv *imxpriv =  dev_get_drvdata(dev->parent);
+
+	/*
+	 * If no_device is set, The CLKs had been gated off in the
+	 * initialization so don't do it again here.
+	 */
+	if (!imxpriv->no_device) {
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+				IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+				!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+		clk_disable_unprepare(imxpriv->sata_ref_clk);
+	}
+
+	return 0;
+}
+
+static int imx_ahci_resume(struct device *dev)
+{
+	struct imx_ahci_priv *imxpriv =  dev_get_drvdata(dev->parent);
+	int ret;
+
+	if (!imxpriv->no_device) {
+		ret = clk_prepare_enable(imxpriv->sata_ref_clk);
+		if (ret < 0) {
+			dev_err(dev, "pre-enable sata_ref clock err:%d\n", ret);
+			return ret;
+		}
+
+		regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
+				IMX6Q_GPR13_SATA_MPLL_CLK_EN,
+				IMX6Q_GPR13_SATA_MPLL_CLK_EN);
+		usleep_range(1000, 2000);
+	}
+
+	return 0;
+}
+
 static struct ahci_platform_data imx6q_sata_pdata = {
 	.init = imx6q_sata_init,
 	.exit = imx6q_sata_exit,
+	.ata_port_info = &ahci_imx_port_info,
+	.suspend = imx_ahci_suspend,
+	.resume = imx_ahci_resume,
 };
 
 static const struct of_device_id imx_ahci_of_match[] = {
@@ -152,6 +247,8 @@ static int imx_ahci_probe(struct platform_device *pdev)
 	ahci_dev = &ahci_pdev->dev;
 	ahci_dev->parent = dev;
 
+	imxpriv->no_device = false;
+	imxpriv->first_time = true;
 	imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
 	if (IS_ERR(imxpriv->ahb_clk)) {
 		dev_err(dev, "can't get ahb clock.\n");

drivers/ata/ahci_platform.c

@@ -49,10 +49,11 @@ static struct platform_device_id ahci_devtype[] = {
 };
 MODULE_DEVICE_TABLE(platform, ahci_devtype);
 
-static struct ata_port_operations ahci_platform_ops = {
+struct ata_port_operations ahci_platform_ops = {
 	.inherits	= &ahci_ops,
 	.host_stop	= ahci_host_stop,
 };
+EXPORT_SYMBOL_GPL(ahci_platform_ops);
 
 static struct ata_port_operations ahci_platform_retry_srst_ops = {
 	.inherits	= &ahci_pmp_retry_srst_ops,

drivers/ata/ata_piix.c

@@ -100,7 +100,7 @@
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */
-	ICH5_PMR		= 0x90, /* port mapping register */
+	ICH5_PMR		= 0x90, /* address map register */
 	ICH5_PCS		= 0x92,	/* port control and status */
 	PIIX_SIDPR_BAR		= 5,
 	PIIX_SIDPR_LEN		= 16,
@@ -233,7 +233,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	  PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
 	/* 82801GB/GR/GH (ICH7, identical to ICH6) */
 	{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
-	/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
+	/* 82801GBM/GHM (ICH7M, identical to ICH6M)  */
 	{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
 	/* Enterprise Southbridge 2 (631xESB/632xESB) */
 	{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
@@ -517,7 +517,7 @@ static int ich_pata_cable_detect(struct ata_port *ap)
 	const struct ich_laptop *lap = &ich_laptop[0];
 	u8 mask;
 
-	/* Check for specials - Acer Aspire 5602WLMi */
+	/* Check for specials */
 	while (lap->device) {
 		if (lap->device == pdev->device &&
 		    lap->subvendor == pdev->subsystem_vendor &&
@@ -1366,38 +1366,39 @@ static const int *piix_init_sata_map(struct pci_dev *pdev,
 	const int *map;
 	int i, invalid_map = 0;
 	u8 map_value;
+	char buf[32];
+	char *p = buf, *end = buf + sizeof(buf);
 
 	pci_read_config_byte(pdev, ICH5_PMR, &map_value);
 
 	map = map_db->map[map_value & map_db->mask];
 
-	dev_info(&pdev->dev, "MAP [");
 	for (i = 0; i < 4; i++) {
 		switch (map[i]) {
 		case RV:
 			invalid_map = 1;
-			pr_cont(" XX");
+			p += scnprintf(p, end - p, " XX");
 			break;
 
 		case NA:
-			pr_cont(" --");
+			p += scnprintf(p, end - p, " --");
 			break;
 
 		case IDE:
 			WARN_ON((i & 1) || map[i + 1] != IDE);
 			pinfo[i / 2] = piix_port_info[ich_pata_100];
 			i++;
-			pr_cont(" IDE IDE");
+			p += scnprintf(p, end - p, " IDE IDE");
 			break;
 
 		default:
-			pr_cont(" P%d", map[i]);
+			p += scnprintf(p, end - p, " P%d", map[i]);
 			if (i & 1)
 				pinfo[i / 2].flags |= ATA_FLAG_SLAVE_POSS;
 			break;
 		}
 	}
-	pr_cont(" ]\n");
+	dev_info(&pdev->dev, "MAP [%s ]\n", buf);
 
 	if (invalid_map)
 		dev_err(&pdev->dev, "invalid MAP value %u\n", map_value);

drivers/ata/libahci.c

@@ -89,7 +89,6 @@ static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 			  unsigned long deadline);
 static void ahci_postreset(struct ata_link *link, unsigned int *class);
-static void ahci_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
 static void ahci_dev_config(struct ata_device *dev);
 #ifdef CONFIG_PM
@@ -189,14 +188,15 @@ struct ata_port_operations ahci_pmp_retry_srst_ops = {
 };
 EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
 
-int ahci_em_messages = 1;
+static bool ahci_em_messages __read_mostly = true;
 EXPORT_SYMBOL_GPL(ahci_em_messages);
-module_param(ahci_em_messages, int, 0444);
+module_param(ahci_em_messages, bool, 0444);
 /* add other LED protocol types when they become supported */
 MODULE_PARM_DESC(ahci_em_messages,
 	"AHCI Enclosure Management Message control (0 = off, 1 = on)");
 
-int devslp_idle_timeout = 1000;	/* device sleep idle timeout in ms */
+/* device sleep idle timeout in ms */
+static int devslp_idle_timeout __read_mostly = 1000;
 module_param(devslp_idle_timeout, int, 0644);
 MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout");
 
@@ -1275,9 +1275,11 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 {
 	struct ata_port *ap = link->ap;
 	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
 	const char *reason = NULL;
 	unsigned long now, msecs;
 	struct ata_taskfile tf;
+	bool fbs_disabled = false;
 	int rc;
 
 	DPRINTK("ENTER\n");
@@ -1287,6 +1289,16 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	if (rc && rc != -EOPNOTSUPP)
 		ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc);
 
+	/*
+	 * According to AHCI-1.2 9.3.9: if FBS is enable, software shall
+	 * clear PxFBS.EN to '0' prior to issuing software reset to devices
+	 * that is attached to port multiplier.
+	 */
+	if (!ata_is_host_link(link) && pp->fbs_enabled) {
+		ahci_disable_fbs(ap);
+		fbs_disabled = true;
+	}
+
 	ata_tf_init(link->device, &tf);
 
 	/* issue the first D2H Register FIS */
@@ -1327,6 +1339,10 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	} else
 		*class = ahci_dev_classify(ap);
 
+	/* re-enable FBS if disabled before */
+	if (fbs_disabled)
+		ahci_enable_fbs(ap);
+
 	DPRINTK("EXIT, class=%u\n", *class);
 	return 0;
 
@@ -1989,7 +2005,7 @@ static void ahci_thaw(struct ata_port *ap)
 	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
 }
 
-static void ahci_error_handler(struct ata_port *ap)
+void ahci_error_handler(struct ata_port *ap)
 {
 	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
 		/* restart engine */
@@ -2002,6 +2018,7 @@ static void ahci_error_handler(struct ata_port *ap)
 	if (!ata_dev_enabled(ap->link.device))
 		ahci_stop_engine(ap);
 }
+EXPORT_SYMBOL_GPL(ahci_error_handler);
 
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
 {

drivers/ata/libata-core.c

@@ -4126,6 +4126,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
 	{ "QUANTUM DAT    DAT72-000", NULL,	ATA_HORKAGE_ATAPI_MOD16_DMA },
 	{ "Slimtype DVD A  DS8A8SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
+	{ "Slimtype DVD A  DS8A9SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 
 	/* Devices we expect to fail diagnostics */
 

drivers/ata/libata-eh.c

@@ -2293,6 +2293,7 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_IDLE, 		"IDLE" },
 		{ ATA_CMD_EDD, 			"EXECUTE DEVICE DIAGNOSTIC" },
 		{ ATA_CMD_DOWNLOAD_MICRO,   	"DOWNLOAD MICROCODE" },
+		{ ATA_CMD_DOWNLOAD_MICRO_DMA,	"DOWNLOAD MICROCODE DMA" },
 		{ ATA_CMD_NOP,			"NOP" },
 		{ ATA_CMD_FLUSH, 		"FLUSH CACHE" },
 		{ ATA_CMD_FLUSH_EXT, 		"FLUSH CACHE EXT" },
@@ -2313,6 +2314,8 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
 		{ ATA_CMD_FPDMA_READ,		"READ FPDMA QUEUED" },
 		{ ATA_CMD_FPDMA_WRITE,		"WRITE FPDMA QUEUED" },
+		{ ATA_CMD_FPDMA_SEND,		"SEND FPDMA QUEUED" },
+		{ ATA_CMD_FPDMA_RECV,		"RECEIVE FPDMA QUEUED" },
 		{ ATA_CMD_PIO_READ,		"READ SECTOR(S)" },
 		{ ATA_CMD_PIO_READ_EXT,		"READ SECTOR(S) EXT" },
 		{ ATA_CMD_PIO_WRITE,		"WRITE SECTOR(S)" },
@@ -2339,12 +2342,15 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_WRITE_LOG_EXT,	"WRITE LOG EXT" },
 		{ ATA_CMD_READ_LOG_DMA_EXT,	"READ LOG DMA EXT" },
 		{ ATA_CMD_WRITE_LOG_DMA_EXT, 	"WRITE LOG DMA EXT" },
+		{ ATA_CMD_TRUSTED_NONDATA,	"TRUSTED NON-DATA" },
 		{ ATA_CMD_TRUSTED_RCV,		"TRUSTED RECEIVE" },
 		{ ATA_CMD_TRUSTED_RCV_DMA, 	"TRUSTED RECEIVE DMA" },
 		{ ATA_CMD_TRUSTED_SND,		"TRUSTED SEND" },
 		{ ATA_CMD_TRUSTED_SND_DMA, 	"TRUSTED SEND DMA" },
 		{ ATA_CMD_PMP_READ,		"READ BUFFER" },
+		{ ATA_CMD_PMP_READ_DMA,		"READ BUFFER DMA" },
 		{ ATA_CMD_PMP_WRITE,		"WRITE BUFFER" },
+		{ ATA_CMD_PMP_WRITE_DMA,	"WRITE BUFFER DMA" },
 		{ ATA_CMD_CONF_OVERLAY,		"DEVICE CONFIGURATION OVERLAY" },
 		{ ATA_CMD_SEC_SET_PASS,		"SECURITY SET PASSWORD" },
 		{ ATA_CMD_SEC_UNLOCK,		"SECURITY UNLOCK" },
@@ -2363,6 +2369,8 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_CFA_TRANS_SECT,	"CFA TRANSLATE SECTOR" },
 		{ ATA_CMD_CFA_ERASE,		"CFA ERASE SECTORS" },
 		{ ATA_CMD_CFA_WRITE_MULT_NE, 	"CFA WRITE MULTIPLE WITHOUT ERASE" },
+		{ ATA_CMD_REQ_SENSE_DATA,	"REQUEST SENSE DATA EXT" },
+		{ ATA_CMD_SANITIZE_DEVICE,	"SANITIZE DEVICE" },
 		{ ATA_CMD_READ_LONG,		"READ LONG (with retries)" },
 		{ ATA_CMD_READ_LONG_ONCE,	"READ LONG (without retries)" },
 		{ ATA_CMD_WRITE_LONG,		"WRITE LONG (with retries)" },