---

yaml
---
r: 68514
b: refs/heads/master
c: 62d24d9
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 34a27ffdf59f80fe165f5c56a0be57d55b6da63d
+refs/heads/master: 62d24d91109c3bcd5a5d3fe6cbe354e65e787300

trunk/Documentation/DocBook/mtdnand.tmpl

@@ -275,16 +275,13 @@ int __init board_init (void)
 	int err = 0;
 
 	/* Allocate memory for MTD device structure and private data */
-	board_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), GFP_KERNEL);
+	board_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
 	if (!board_mtd) {
 		printk ("Unable to allocate NAND MTD device structure.\n");
 		err = -ENOMEM;
 		goto out;
 	}
 
-	/* Initialize structures */
-	memset ((char *) board_mtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip));
-
 	/* map physical adress */
 	baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
 	if(!baseaddr){

trunk/drivers/mtd/Kconfig

@@ -278,6 +278,14 @@ config SSFDC
 	  This enables read only access to SmartMedia formatted NAND
 	  flash. You can mount it with FAT file system.
 
+config MTD_OOPS
+	tristate "Log panic/oops to an MTD buffer"
+	depends on MTD
+	help
+	  This enables panic and oops messages to be logged to a circular
+	  buffer in a flash partition where it can be read back at some
+	  later point.
+
 source "drivers/mtd/chips/Kconfig"
 
 source "drivers/mtd/maps/Kconfig"

trunk/drivers/mtd/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_NFTL)		+= nftl.o
 obj-$(CONFIG_INFTL)		+= inftl.o
 obj-$(CONFIG_RFD_FTL)		+= rfd_ftl.o
 obj-$(CONFIG_SSFDC)		+= ssfdc.o
+obj-$(CONFIG_MTD_OOPS)		+= mtdoops.o
 
 nftl-objs		:= nftlcore.o nftlmount.o
 inftl-objs		:= inftlcore.o inftlmount.o

trunk/drivers/mtd/chips/cfi_cmdset_0001.c

@@ -526,7 +526,7 @@ static int cfi_intelext_partition_fixup(struct mtd_info *mtd,
 	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 
 	/*
-	 * Probing of multi-partition flash ships.
+	 * Probing of multi-partition flash chips.
 	 *
 	 * To support multiple partitions when available, we simply arrange
 	 * for each of them to have their own flchip structure even if they
@@ -1780,7 +1780,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	return ret;
 }
 
-int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
 {
 	unsigned long ofs, len;
 	int ret;
@@ -1930,7 +1930,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
 	       __FUNCTION__, ofs, len);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
@@ -1940,7 +1940,7 @@ static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
 	       __FUNCTION__, ret);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	return ret;
@@ -1954,7 +1954,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
 	       __FUNCTION__, ofs, len);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	ret = cfi_varsize_frob(mtd, do_xxlock_oneblock,
@@ -1964,7 +1964,7 @@ static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 	printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
 	       __FUNCTION__, ret);
 	cfi_varsize_frob(mtd, do_printlockstatus_oneblock,
-		ofs, len, 0);
+		ofs, len, NULL);
 #endif
 
 	return ret;
@@ -2255,7 +2255,7 @@ static void cfi_intelext_save_locks(struct mtd_info *mtd)
 			adr = region->offset + block * len;
 
 			status = cfi_varsize_frob(mtd,
-					do_getlockstatus_oneblock, adr, len, 0);
+					do_getlockstatus_oneblock, adr, len, NULL);
 			if (status)
 				set_bit(block, region->lockmap);
 			else

trunk/drivers/mtd/chips/cfi_cmdset_0002.c

@@ -1609,7 +1609,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 }
 
 
-int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
+static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr)
 {
 	unsigned long ofs, len;
 	int ret;

trunk/drivers/mtd/chips/jedec_probe.c

@@ -17,7 +17,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -70,6 +69,7 @@
 
 /* Fujitsu */
 #define MBM29F040C	0x00A4
+#define MBM29F800BA	0x2258
 #define MBM29LV650UE	0x22D7
 #define MBM29LV320TE	0x22F6
 #define MBM29LV320BE	0x22F9
@@ -129,6 +129,7 @@
 #define LH28F640BF	0x00b0
 
 /* ST - www.st.com */
+#define M29F800AB	0x0058
 #define M29W800DT	0x00D7
 #define M29W800DB	0x005B
 #define M29W160DT	0x22C4
@@ -644,6 +645,23 @@ static const struct amd_flash_info jedec_table[] = {
 		.regions	= {
 			ERASEINFO(0x10000,8)
 		}
+	}, {
+		.mfr_id		= MANUFACTURER_FUJITSU,
+		.dev_id		= MBM29F800BA,
+		.name		= "Fujitsu MBM29F800BA",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
 	}, {
 		.mfr_id		= MANUFACTURER_FUJITSU,
 		.dev_id		= MBM29LV650UE,
@@ -1510,6 +1528,23 @@ static const struct amd_flash_info jedec_table[] = {
                        ERASEINFO(0x1000,256)
                }
 
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M29F800AB,
+		.name		= "ST M29F800AB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0AAA_0x0555,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
        }, {
 		.mfr_id		= MANUFACTURER_ST,	/* FIXME - CFI device? */
 		.dev_id		= M29W800DT,

trunk/drivers/mtd/devices/Kconfig

@@ -60,21 +60,22 @@ config MTD_DATAFLASH
 	  Sometimes DataFlash chips are packaged inside MMC-format
 	  cards; at this writing, the MMC stack won't handle those.
 
-config MTD_DATAFLASH26
-	tristate "AT91RM9200 DataFlash AT26xxx"
-	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-	help
-	  This enables access to the DataFlash chip (AT26xxx) on an
-	  AT91RM9200-based board.
-	  If you have such a board and such a DataFlash, say 'Y'.
-
 config MTD_M25P80
-	tristate "Support for M25 SPI Flash"
+	tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
 	depends on SPI_MASTER && EXPERIMENTAL
 	help
-	  This enables access to ST M25P80 and similar SPI flash chips,
-	  used for program and data storage.  Set up your spi devices
-	  with the right board-specific platform data.
+	  This enables access to most modern SPI flash chips, used for
+	  program and data storage.   Series supported include Atmel AT26DF,
+	  Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
+	  are supported as well.  See the driver source for the current list,
+	  or to add other chips.
+
+	  Note that the original DataFlash chips (AT45 series, not AT26DF),
+	  need an entirely different driver.
+
+	  Set up your spi devices with the right board-specific platform data,
+	  if you want to specify device partitioning or to use a device which
+	  doesn't support the JEDEC ID instruction.
 
 config MTD_SLRAM
 	tristate "Uncached system RAM"

trunk/drivers/mtd/devices/Makefile

@@ -16,5 +16,4 @@ obj-$(CONFIG_MTD_MTDRAM)	+= mtdram.o
 obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
-obj-$(CONFIG_MTD_DATAFLASH26)	+= at91_dataflash26.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o