---

yaml
---
r: 195039
b: refs/heads/master
c: c476efb
h: refs/heads/master
i:
  195037: 4cb1a76
  195035: fd99e2b
  195031: d89ac12
  195023: fdd9c94
  195007: 67ec2b1
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0b9715e64f7d46a9620d4d5042a5e28f5595ed54
+refs/heads/master: c476efbcde5ba58b81ac752f4a894d6db8e17d94

trunk/Documentation/DocBook/libata.tmpl

@@ -107,6 +107,10 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 	<para>
+	Called by ata_device_add() after ata_dev_identify() determines
+	a device is present.
+	</para>
+	<para>
 	This entry may be specified as NULL in ata_port_operations.
 	</para>
 
@@ -150,8 +154,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
 	<sect2><title>Taskfile read/write</title>
 	<programlisting>
-void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
@@ -160,35 +164,36 @@ void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	hardware registers / DMA buffers, to obtain the current set of
 	taskfile register values.
 	Most drivers for taskfile-based hardware (PIO or MMIO) use
-	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
+	ata_tf_load() and ata_tf_read() for these hooks.
 	</para>
 
 	</sect2>
 
 	<sect2><title>PIO data read/write</title>
 	<programlisting>
-void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 	</programlisting>
 
 	<para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver will choose one of ata_sff_data_xfer_noirq(),
-ata_sff_data_xfer(), or ata_sff_data_xfer32().
+Typically the driver
+will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
+ata_mmio_data_xfer().
 	</para>
 
 	</sect2>
 
 	<sect2><title>ATA command execute</title>
 	<programlisting>
-void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
 	causes an ATA command, previously loaded with
 	->tf_load(), to be initiated in hardware.
-	Most drivers for taskfile-based hardware use ata_sff_exec_command()
+	Most drivers for taskfile-based hardware use ata_exec_command()
 	for this hook.
 	</para>
 
@@ -213,23 +218,29 @@ command.
 
 	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
-u8   (*sff_check_status)(struct ata_port *ap);
-u8   (*sff_check_altstatus)(struct ata_port *ap);
+u8   (*check_status)(struct ata_port *ap);
+u8   (*check_altstatus)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
 	Reads the Status/AltStatus ATA shadow register from
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
-	ata_sff_check_status() for this hook.
+	ata_check_status() for this hook.
+	</para>
+	<para>
+	Note that because this is called from ata_device_add(), at
+	least a dummy function that clears device interrupts must be
+	provided for all drivers, even if the controller doesn't
+	actually have a taskfile status register.
 	</para>
 
 	</sect2>
 
 	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
-void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
+void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
 
 	<para>
@@ -240,7 +251,9 @@ void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
 	</para>
 	<para>
 	Most drivers for taskfile-based hardware use
-	ata_sff_dev_select() for this hook.
+	ata_std_dev_select() for this hook.  Controllers which do not
+	support second drives on a port (such as SATA contollers) will
+	use ata_noop_dev_select().
 	</para>
 
 	</sect2>
@@ -428,13 +441,13 @@ void (*irq_clear) (struct ata_port *);
 	to struct ata_host_set.
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_sff_interrupt() for the
+	Most legacy IDE drivers use ata_interrupt() for the
 	irq_handler hook, which scans all ports in the host_set,
 	determines which queued command was active (if any), and calls
-	ata_sff_host_intr(ap,qc).
+	ata_host_intr(ap,qc).
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_sff_irq_clear() for the
+	Most legacy IDE drivers use ata_bmdma_irq_clear() for the
 	irq_clear() hook, which simply clears the interrupt and error
 	flags in the DMA status register.
 	</para>
@@ -483,6 +496,10 @@ void (*host_stop) (struct ata_host_set *host_set);
 	data from port at this time.
 	</para>
 	<para>
+	Many drivers use ata_port_stop() as this hook, which frees the
+	PRD table.
+	</para>
+	<para>
 	->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.

trunk/Documentation/HOWTO

@@ -234,7 +234,7 @@ process is as follows:
     Linus, usually the patches that have already been included in the
     -next kernel for a few weeks.  The preferred way to submit big changes
     is using git (the kernel's source management tool, more information
-    can be found at http://git-scm.com/) but plain patches are also just
+    can be found at http://git.or.cz/) but plain patches are also just
     fine.
   - After two weeks a -rc1 kernel is released it is now possible to push
     only patches that do not include new features that could affect the

trunk/Documentation/cgroups/cgroups.txt

@@ -235,7 +235,8 @@ containing the following files describing that cgroup:
  - cgroup.procs: list of tgids in the cgroup.  This list is not
    guaranteed to be sorted or free of duplicate tgids, and userspace
    should sort/uniquify the list if this property is required.
-   This is a read-only file, for now.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)

trunk/Documentation/feature-removal-schedule.txt

@@ -626,26 +626,3 @@ Files:	net/netfilter/xt_NOTRACK.c
 When:	April 2011
 Why:	Superseded by xt_CT
 Who:	Netfilter developer team <netfilter-devel@vger.kernel.org>
-
----------------------------
-
-What:	video4linux /dev/vtx teletext API support
-When:	2.6.35
-Files:	drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
-	include/linux/videotext.h
-Why:	The vtx device nodes have been superseded by vbi device nodes
-	for many years. No applications exist that use the vtx support.
-	Of the two i2c drivers that actually support this API the saa5249
-	has been impossible to use for a year now and no known hardware
-	that supports this device exists. The saa5246a is theoretically
-	supported by the old mxb boards, but it never actually worked.
-
-	In summary: there is no hardware that can use this API and there
-	are no applications actually implementing this API.
-
-	The vtx support still reserves minors 192-223 and we would really
-	like to reuse those for upcoming new functionality. In the unlikely
-	event that new hardware appears that wants to use the functionality
-	provided by the vtx API, then that functionality should be build
-	around the sliced VBI API instead.
-Who:	Hans Verkuil <hverkuil@xs4all.nl>

trunk/Documentation/filesystems/proc.txt

@@ -316,7 +316,7 @@ address           perms offset  dev   inode      pathname
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
 0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0          [threadstack:001ff4b4]
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
@@ -352,6 +352,7 @@ is not associated with a file:
  [stack]                  = the stack of the main process
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
+ [threadstack:xxxxxxxx]   = the stack of the thread, xxxxxxxx is the stack size
 
  or if empty, the mapping is anonymous.
 

trunk/Documentation/i2c/writing-clients

@@ -74,11 +74,6 @@ structure at all.  You should use this to keep device-specific data.
 	/* retrieve the value */
 	void *i2c_get_clientdata(const struct i2c_client *client);
 
-Note that starting with kernel 2.6.34, you don't have to set the `data' field
-to NULL in remove() or if probe() failed anymore. The i2c-core does this
-automatically on these occasions. Those are also the only times the core will
-touch this field.
-
 
 Accessing the client
 ====================

trunk/Documentation/input/elantech.txt

@@ -333,14 +333,14 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-         .   .   .   .   .  x10 x9  x8
+        x15 x14 x13 x12 x11 x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         x7  x6  x5  x4  x4  x2  x1  x0
 
-         x10..x0 = absolute x value (horizontal)
+         x15..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -350,14 +350,14 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-         .   .   .   .   .   .  y9  y8
+        y15 y14 y13 y12 y11 y10 y8  y8
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y9..y0 = absolute y value (vertical)
+         y15..y0 = absolute y value (vertical)
 
 
 4.2.2 Two finger touch

trunk/Documentation/kernel-parameters.txt

@@ -1194,7 +1194,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	libata.force=	[LIBATA] Force configurations.  The format is comma
 			separated list of "[ID:]VAL" where ID is
-			PORT[.DEVICE].  PORT and DEVICE are decimal numbers
+			PORT[:DEVICE].  PORT and DEVICE are decimal numbers
 			matching port, link or device.  Basically, it matches
 			the ATA ID string printed on console by libata.  If
 			the whole ID part is omitted, the last PORT and DEVICE

trunk/Documentation/spi/spidev_test.c

@@ -58,7 +58,7 @@ static void transfer(int fd)
 	};
 
 	ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-	if (ret < 1)
+	if (ret == 1)
 		pabort("can't send spi message");
 
 	for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {

trunk/Documentation/stable_kernel_rules.txt

@@ -18,15 +18,16 @@ Rules on what kind of patches are accepted, and which ones are not, into the
  - It cannot contain any "trivial" fixes in it (spelling changes,
    whitespace cleanups, etc).
  - It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree (upstream).
+ - It or an equivalent fix must already exist in Linus' tree.  Quote the
+   respective commit ID in Linus' tree in your patch submission to -stable.
 
 
 Procedure for submitting patches to the -stable tree:
 
  - Send the patch, after verifying that it follows the above rules, to
-   stable@kernel.org.  You must note the upstream commit ID in the changelog
-   of your submission.
- - To have the patch automatically included in the stable tree, add the tag
+   stable@kernel.org.
+ - To have the patch automatically included in the stable tree, add the
+   the tag
      Cc: stable@kernel.org
    in the sign-off area. Once the patch is merged it will be applied to
    the stable tree without anything else needing to be done by the author

trunk/MAINTAINERS

@@ -1961,7 +1961,7 @@ F:	lib/kobj*
 
 DRM DRIVERS
 M:	David Airlie <airlied@linux.ie>
-L:	dri-devel@lists.freedesktop.org
+L:	dri-devel@lists.sourceforge.net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
@@ -4482,17 +4482,17 @@ S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-M:	Geoff Levand <geoff@infradead.org>
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
-S:	Maintained
+S:	Supported
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-M:	Geoff Levand <geoff@infradead.org>
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
-S:	Maintained
+S:	Supported
 F:	arch/powerpc/boot/ps3*
 F:	arch/powerpc/include/asm/lv1call.h
 F:	arch/powerpc/include/asm/ps3*.h
@@ -4791,11 +4791,12 @@ F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
 M:	Christof Schmitt <christof.schmitt@de.ibm.com>
-M:	Swen Schillig <swen@vnet.ibm.com>
+M:	Martin Peschke <mp3@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
+F:	Documentation/s390/zfcpdump.txt
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc5
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -253,7 +253,6 @@ config ARCH_REALVIEW
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select GPIO_PL061 if GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 

trunk/arch/arm/boot/compressed/head.S

@@ -685,8 +685,8 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
 
-		.word	0x56056900
-		.word	0xffffff00		@ PXA9xx
+		.word	0x56056930
+		.word	0xff0ffff0		@ PXA935
 		W(b)	__armv4_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
@@ -697,6 +697,12 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv5tej_mmu_cache_flush
 
+		.word	0x56056930
+		.word	0xff0ffff0		@ PXA935
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
+
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		W(b)	__armv4_mmu_cache_on