---

yaml
---
r: 260223
b: refs/heads/master
c: 603f2e6
h: refs/heads/master
i:
  260221: 5c9b8af
  260219: 89067db
  260215: 31b826f
  260207: 5bcebc3
  260191: e6c3fc6
  260159: c5774c1
  260095: f5fe194
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9962cc6eba013607d6199b723afca23301df7b47
+refs/heads/master: 603f2e6d378948bf5e5ac04d98673761362a3b79

trunk/CREDITS

@@ -518,7 +518,7 @@ N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
 
-M: David Brownell
+N: David Brownell
 D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
 D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
 D: device drivers.  His encouragement also helped many engineers get

trunk/Documentation/Changes

@@ -2,13 +2,7 @@ Intro
 =====
 
 This document is designed to provide a list of the minimum levels of
-software necessary to run the 2.6 kernels, as well as provide brief
-instructions regarding any other "Gotchas" users may encounter when
-trying life on the Bleeding Edge.  If upgrading from a pre-2.4.x
-kernel, please consult the Changes file included with 2.4.x kernels for
-additional information; most of that information will not be repeated
-here.  Basically, this document assumes that your system is already
-functional and running at least 2.4.x kernels.
+software necessary to run the 3.0 kernels.
 
 This document is originally based on my "Changes" file for 2.0.x kernels
 and therefore owes credit to the same people as that file (Jared Mauch,
@@ -22,11 +16,10 @@ Upgrade to at *least* these software revisions before thinking you've
 encountered a bug!  If you're unsure what version you're currently
 running, the suggested command should tell you.
 
-Again, keep in mind that this list assumes you are already
-functionally running a Linux 2.4 kernel.  Also, not all tools are
-necessary on all systems; obviously, if you don't have any ISDN
-hardware, for example, you probably needn't concern yourself with
-isdn4k-utils.
+Again, keep in mind that this list assumes you are already functionally
+running a Linux kernel.  Also, not all tools are necessary on all
+systems; obviously, if you don't have any ISDN hardware, for example,
+you probably needn't concern yourself with isdn4k-utils.
 
 o  Gnu C                  3.2                     # gcc --version
 o  Gnu make               3.80                    # make --version
@@ -114,12 +107,12 @@ Ksymoops
 
 If the unthinkable happens and your kernel oopses, you may need the
 ksymoops tool to decode it, but in most cases you don't.
-In the 2.6 kernel it is generally preferred to build the kernel with
-CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is
-(this also produces better output than ksymoops).
-If for some reason your kernel is not build with CONFIG_KALLSYMS and
-you have no way to rebuild and reproduce the Oops with that option, then
-you can still decode that Oops with ksymoops.
+It is generally preferred to build the kernel with CONFIG_KALLSYMS so
+that it produces readable dumps that can be used as-is (this also
+produces better output than ksymoops).  If for some reason your kernel
+is not build with CONFIG_KALLSYMS and you have no way to rebuild and
+reproduce the Oops with that option, then you can still decode that Oops
+with ksymoops.
 
 Module-Init-Tools
 -----------------
@@ -261,8 +254,8 @@ needs to be recompiled or (preferably) upgraded.
 NFS-utils
 ---------
 
-In 2.4 and earlier kernels, the nfs server needed to know about any
-client that expected to be able to access files via NFS.  This
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
+about any client that expected to be able to access files via NFS.  This
 information would be given to the kernel by "mountd" when the client
 mounted the filesystem, or by "exportfs" at system startup.  exportfs
 would take information about active clients from /var/lib/nfs/rmtab.
@@ -272,11 +265,11 @@ which is not always easy, particularly when trying to implement
 fail-over.  Even when the system is working well, rmtab suffers from
 getting lots of old entries that never get removed.
 
-With 2.6 we have the option of having the kernel tell mountd when it
-gets a request from an unknown host, and mountd can give appropriate
-export information to the kernel.  This removes the dependency on
-rmtab and means that the kernel only needs to know about currently
-active clients.
+With modern kernels we have the option of having the kernel tell mountd
+when it gets a request from an unknown host, and mountd can give
+appropriate export information to the kernel.  This removes the
+dependency on rmtab and means that the kernel only needs to know about
+currently active clients.
 
 To enable this new functionality, you need to:
 

trunk/Documentation/CodingStyle

@@ -680,8 +680,8 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), and vmalloc().  Please refer to the API
-documentation for further information about them.
+kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
+the API documentation for further information about them.
 
 The preferred form for passing a size of a struct is the following:
 

trunk/Documentation/cgroups/blkio-controller.txt

@@ -77,7 +77,7 @@ Throttling/Upper Limit policy
 - Specify a bandwidth rate on particular device for root group. The format
   for policy is "<major>:<minor>  <byes_per_second>".
 
-        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
@@ -90,7 +90,7 @@ Throttling/Upper Limit policy
         1024+0 records out
         4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
 
- Limits for writes can be put using blkio.write_bps_device file.
+ Limits for writes can be put using blkio.throttle.write_bps_device file.
 
 Hierarchical Cgroups
 ====================
@@ -286,28 +286,28 @@ Throttling/Upper limit policy files
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in IO per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in io per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
       subjectd to both the constraints.

trunk/Documentation/feature-removal-schedule.txt

@@ -583,3 +583,25 @@ Why:	Superseded by the UVCIOC_CTRL_QUERY ioctl.
 Who:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 ----------------------------
+
+What:	For VIDIOC_S_FREQUENCY the type field must match the device node's type.
+	If not, return -EINVAL.
+When:	3.2
+Why:	It makes no sense to switch the tuner to radio mode by calling
+	VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
+	calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
+	move to more consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------
+
+What:	Opening a radio device node will no longer automatically switch the
+	tuner mode from tv to radio.
+When:	3.3
+Why:	Just opening a V4L device should not change the state of the hardware
+	like that. It's very unexpected and against the V4L spec. Instead, you
+	switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
+	and last step of the move to consistent handling of tv and radio tuners.
+Who:	Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------

trunk/Documentation/filesystems/caching/netfs-api.txt

@@ -673,6 +673,22 @@ storage request to complete, or it may attempt to cancel the storage request -
 in which case the page will not be stored in the cache this time.
 
 
+BULK INODE PAGE UNCACHE
+-----------------------
+
+A convenience routine is provided to perform an uncache on all the pages
+attached to an inode.  This assumes that the pages on the inode correspond on a
+1:1 basis with the pages in the cache.
+
+	void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+					     struct inode *inode);
+
+This takes the netfs cookie that the pages were cached with and the inode that
+the pages are attached to.  This function will wait for pages to finish being
+written to the cache and for the cache to finish with the page generally.  No
+error is returned.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================

trunk/Documentation/filesystems/proc.txt

@@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
+     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

trunk/Documentation/hwmon/f71882fg

@@ -22,6 +22,10 @@ Supported chips:
     Prefix: 'f71869'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71869A
+    Prefix: 'f71869a'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71882FG and F71883FG
     Prefix: 'f71882fg'
     Addresses scanned: none, address read from Super I/O config space

trunk/Documentation/hwmon/k10temp

@@ -9,8 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano"
-* AMD Family 14h processors: "Brazos" (C/E/G-Series)
+* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
+* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 * AMD Family 15h processors: "Bulldozer"
 
   Prefix: 'k10temp'
@@ -20,12 +20,16 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41131.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/44739.pdf
   Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:

trunk/Documentation/kernel-parameters.txt

@@ -2015,6 +2015,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the default.
 				off: Turn ECRC off
 				on: Turn ECRC on.
+		realloc		reallocate PCI resources if allocations done by BIOS
+				are erroneous.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.

trunk/Documentation/laptops/thinkpad-acpi.txt

@@ -534,6 +534,8 @@ Events that are never propagated by the driver:
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
 0x5010		Brightness level changed/control event
+0x6000		KEYBOARD: Numlock key pressed
+0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
 
 Events that are propagated by the driver to userspace:
 
@@ -545,13 +547,16 @@ Events that are propagated by the driver to userspace:
 0x3006		Bay hotplug request (hint to power up SATA link when
 		the optical drive tray is ejected)
 0x4003		Undocked (see 0x2x04), can sleep again
+0x4010		Docked into hotplug port replicator (non-ACPI dock)
+0x4011		Undocked from hotplug port replicator (non-ACPI dock)
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
 0x6011		ALARM: battery is too hot
 0x6012		ALARM: battery is extremely hot
 0x6021		ALARM: a sensor is too hot
 0x6022		ALARM: a sensor is extremely hot
 0x6030		System thermal table changed
+0x6040		Nvidia Optimus/AC adapter related (TO BE VERIFIED)
 
 Battery nearly empty alarms are a last resort attempt to get the
 operating system to hibernate or shutdown cleanly (0x2313), or shutdown

trunk/Documentation/power/devices.txt

@@ -520,59 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct
 device.  This field is a pointer to an object of type struct dev_power_domain,
 defined in include/linux/pm.h, providing a set of power management callbacks
 analogous to the subsystem-level and device driver callbacks that are executed
-for the given device during all power transitions, in addition to the respective
-subsystem-level callbacks.  Specifically, the power domain "suspend" callbacks
-(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
-executed after the analogous subsystem-level callbacks, while the power domain
-"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
-etc.) are executed before the analogous subsystem-level callbacks.  Error codes
-returned by the "suspend" and "resume" power domain callbacks are ignored.
-
-Power domain ->runtime_idle() callback is executed before the subsystem-level
-->runtime_idle() callback and the result returned by it is not ignored.  Namely,
-if it returns error code, the subsystem-level ->runtime_idle() callback will not
-be called and the helper function rpm_idle() executing it will return error
-code.  This mechanism is intended to help platforms where saving device state
-is a time consuming operation and should only be carried out if all devices
-in the power domain are idle, before turning off the shared power resource(s).
-Namely, the power domain ->runtime_idle() callback may return error code until
-the pm_runtime_idle() helper (or its asychronous version) has been called for
-all devices in the power domain (it is recommended that the returned error code
-be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
-callback from being run prematurely.
-
-The support for device power domains is only relevant to platforms needing to
-use the same subsystem-level (e.g. platform bus type) and device driver power
-management callbacks in many different power domain configurations and wanting
-to avoid incorporating the support for power domains into the subsystem-level
-callbacks.  The other platforms need not implement it or take it into account
-in any way.
-
-
-System Devices
---------------
-System devices (sysdevs) follow a slightly different API, which can be found in
-
-	include/linux/sysdev.h
-	drivers/base/sys.c
-
-System devices will be suspended with interrupts disabled, and after all other
-devices have been suspended.  On resume, they will be resumed before any other
-devices, and also with interrupts disabled.  These things occur in special
-"sysdev_driver" phases, which affect only system devices.
-
-Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
-the non-boot CPUs are all offline and IRQs are disabled on the remaining online
-CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
-sleep state (or a system image is created).  During resume (or after the image
-has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
-are enabled on the only online CPU, the non-boot CPUs are enabled, and the
-resume_noirq (or thaw_noirq or restore_noirq) phase begins.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
+for the given device during all power transitions, instead of the respective
+subsystem-level callbacks.  Specifically, if a device's pm_domain pointer is
+not NULL, the ->suspend() callback from the object pointed to by it will be
+executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
+anlogously for all of the remaining callbacks.  In other words, power management
+domain callbacks, if defined for the given device, always take precedence over
+the callbacks provided by the device's subsystem (e.g. bus type).
+
+The support for device power management domains is only relevant to platforms
+needing to use the same device driver power management callbacks in many
+different power domain configurations and wanting to avoid incorporating the
+support for power domains into subsystem-level callbacks, for example by
+modifying the platform bus type.  Other platforms need not implement it or take
+it into account in any way.
 
 
 Device Low Power (suspend) States