---

yaml
---
r: 150849
b: refs/heads/master
c: 8db4dc4
h: refs/heads/master
i:
  150847: 773e615
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 130aa61a77b8518f1ea618e1b7d214d60b405f10
+refs/heads/master: 8db4dc46dcff7568896aa1eae4bd07620ce3dd93

trunk/Documentation/isdn/INTERFACE.CAPI

@@ -45,7 +45,7 @@ From then on, Kernel CAPI may call the registered callback functions for the
 device.
 
 If the device becomes unusable for any reason (shutdown, disconnect ...), the
-driver has to call capi_ctr_down(). This will prevent further calls to the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
 callback functions by Kernel CAPI.
 
 
@@ -114,36 +114,20 @@ char *driver_name
 int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
 	(optional) pointer to a callback function for sending firmware and
 	configuration data to the device
-	Return value: 0 on success, error code on error
-	Called in process context.
 
 void (*reset_ctr)(struct capi_ctr *ctrlr)
-	(optional) pointer to a callback function for performing a reset on
-	the device, releasing all registered applications
-	Called in process context.
+	pointer to a callback function for performing a reset on the device,
+	releasing all registered applications
 
 void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
 			capi_register_params *rparam)
 void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
 	pointers to callback functions for registration and deregistration of
 	applications with the device
-	Calls to these functions are serialized by Kernel CAPI so that only
-	one call to any of them is active at any time.
 
 u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	pointer to a callback function for sending a CAPI message to the
 	device
-	Return value: CAPI error code
-	If the method returns 0 (CAPI_NOERROR) the driver has taken ownership
-	of the skb and the caller may no longer access it. If it returns a
-	non-zero (error) value then ownership of the skb returns to the caller
-	who may reuse or free it.
-	The return value should only be used to signal problems with respect
-	to accepting or queueing the message. Errors occurring during the
-	actual processing of the message should be signaled with an
-	appropriate reply message.
-	Calls to this function are not serialized by Kernel CAPI, ie. it must
-	be prepared to be re-entered.
 
 char *(*procinfo)(struct capi_ctr *ctrlr)
 	pointer to a callback function returning the entry for the device in
@@ -154,8 +138,6 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
-
 - to be filled in before calling capi_ctr_ready():
 
 u8 manu[CAPI_MANUFACTURER_LEN]
@@ -171,45 +153,6 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
-
-(declared in <linux/isdn/capiutil.h>)
-
-The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
-
-Members are named after the CAPI 2.0 standard names of the parameters they
-represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
-types are:
-
-u8          for CAPI parameters of type 'byte'
-
-u16         for CAPI parameters of type 'word'
-
-u32         for CAPI parameters of type 'dword'
-
-_cstruct    for CAPI parameters of type 'struct' not containing any
-	    variably-sized (struct) subparameters (eg. 'Called Party Number')
-	    The member is a pointer to a buffer containing the parameter in
-	    CAPI encoding (length + content). It may also be NULL, which will
-	    be taken to represent an empty (zero length) parameter.
-
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-	    subparameters ('Additional Info' and 'B Protocol')
-	    The representation is a single byte containing one of the values:
-	    CAPI_DEFAULT: the parameter is empty
-	    CAPI_COMPOSE: the values of the subparameters are stored
-	    individually in the corresponding _cmsg structure members
-
-Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
-messages between their transport encoding described in the CAPI 2.0 standard
-and their _cmsg structure representation. Note that capi_cmsg2message() does
-not know or check the size of its destination buffer. The caller must make
-sure it is big enough to accomodate the resulting CAPI message.
-
-
 5. Lower Layer Interface Functions
 
 (declared in <linux/isdn/capilli.h>)
@@ -223,7 +166,7 @@ int detach_capi_ctr(struct capi_ctr *ctrlr)
 	register/unregister a device (controller) with Kernel CAPI
 
 void capi_ctr_ready(struct capi_ctr *ctrlr)
-void capi_ctr_down(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
 	signal controller ready/not ready
 
 void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
@@ -268,32 +211,3 @@ CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
 							(u32)
 CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
 
-
-Library functions for working with _cmsg structures
-(from <linux/isdn/capiutil.h>):
-
-unsigned capi_cmsg2message(_cmsg *cmsg, u8 *msg)
-	Assembles a CAPI 2.0 message from the parameters in *cmsg, storing the
-	result in *msg.
-
-unsigned capi_message2cmsg(_cmsg *cmsg, u8 *msg)
-	Disassembles the CAPI 2.0 message in *msg, storing the parameters in
-	*cmsg.
-
-unsigned capi_cmsg_header(_cmsg *cmsg, u16 ApplId, u8 Command, u8 Subcommand,
-			  u16 Messagenumber, u32 Controller)
-	Fills the header part and address field of the _cmsg structure *cmsg
-	with the given values, zeroing the remainder of the structure so only
-	parameters with non-default values need to be changed before sending
-	the message.
-
-void capi_cmsg_answer(_cmsg *cmsg)
-	Sets the low bit of the Subcommand field in *cmsg, thereby converting
-	_REQ to _CONF and _IND to _RESP.
-
-char *capi_cmd2str(u8 Command, u8 Subcommand)
-	Returns the CAPI 2.0 message name corresponding to the given command
-	and subcommand values, as a static ASCII string. The return value may
-	be NULL if the command/subcommand is not one of those defined in the
-	CAPI 2.0 standard.
-

trunk/MAINTAINERS

@@ -2819,18 +2819,6 @@ L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
-IEEE 802.15.4 SUBSYSTEM
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Sergey Lapin
-M:	slapin@ossfans.org
-L:	linux-zigbee-devel@lists.sourceforge.net
-W:	http://apps.sourceforge.net/trac/linux-zigbee
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
-S:	Maintained
-F:	net/ieee802154/
-F:	drivers/ieee801254/
-
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
 P:	Mimi Zohar
 M:	zohar@us.ibm.com

trunk/drivers/Makefile

@@ -107,4 +107,3 @@ obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_STAGING)		+= staging/
 obj-y				+= platform/
-obj-y				+= ieee802154/