Merge branch 'davem-next' of master.kernel.org:/pub/scm/linux/kernel/…

…git/jgarzik/netdev-2.6

MAINTAINERS

@@ -750,11 +750,13 @@ P:	Ville Syrjala
 M:	syrjala@sci.fi
 S:	Maintained
 
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
 P:	Jay Cliburn
 M:	jcliburn@gmail.com
 P:	Chris Snook
 M:	csnook@redhat.com
+P:	Jie Yang
+M:	jie.yang@atheros.com
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net

drivers/net/3c505.c

@@ -130,12 +130,12 @@ static const char filename[] = __FILE__;
 
 static const char timeout_msg[] = "*** timeout at %s:%s (line %d) ***\n";
 #define TIMEOUT_MSG(lineno) \
-	printk(timeout_msg, filename,__FUNCTION__,(lineno))
+	printk(timeout_msg, filename,__func__,(lineno))
 
 static const char invalid_pcb_msg[] =
 "*** invalid pcb length %d at %s:%s (line %d) ***\n";
 #define INVALID_PCB_MSG(len) \
-	printk(invalid_pcb_msg, (len),filename,__FUNCTION__,__LINE__)
+	printk(invalid_pcb_msg, (len),filename,__func__,__LINE__)
 
 static char search_msg[] __initdata = KERN_INFO "%s: Looking for 3c505 adapter at address %#x...";
 

drivers/net/8139too.c

@@ -309,7 +309,7 @@ enum RTL8139_registers {
 	Cfg9346		= 0x50,
 	Config0		= 0x51,
 	Config1		= 0x52,
-	FlashReg	= 0x54,
+	TimerInt	= 0x54,
 	MediaStatus	= 0x58,
 	Config3		= 0x59,
 	Config4		= 0x5A,	 /* absent on RTL-8139A */
@@ -325,6 +325,7 @@ enum RTL8139_registers {
 	FIFOTMS		= 0x70,	 /* FIFO Control and test. */
 	CSCR		= 0x74,	 /* Chip Status and Configuration Register. */
 	PARA78		= 0x78,
+	FlashReg	= 0xD4,	/* Communication with Flash ROM, four bytes. */
 	PARA7c		= 0x7c,	 /* Magic transceiver parameter register. */
 	Config5		= 0xD8,	 /* absent on RTL-8139A */
 };

drivers/net/Kconfig

@@ -2057,6 +2057,7 @@ config R8169
 	tristate "Realtek 8169 gigabit ethernet support"
 	depends on PCI
 	select CRC32
+	select MII
 	---help---
 	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
 
@@ -2411,6 +2412,7 @@ config IXGBE
 	tristate "Intel(R) 10GbE PCI Express adapters support"
 	depends on PCI && INET
 	select INET_LRO
+	select INTEL_IOATDMA
 	---help---
 	  This driver supports Intel(R) 10GbE PCI Express family of
 	  adapters.  For more information on how to identify your adapter, go
@@ -2462,6 +2464,7 @@ config MYRI10GE
 	select FW_LOADER
 	select CRC32
 	select INET_LRO
+	select INTEL_IOATDMA
 	---help---
 	  This driver supports Myricom Myri-10G Dual Protocol interface in
 	  Ethernet mode. If the eeprom on your board is not recent enough,

drivers/net/arcnet/arcnet.c

@@ -442,24 +442,24 @@ static int arcnet_open(struct net_device *dev)
 		BUGMSG(D_NORMAL, "WARNING!  Station address FF may confuse "
 		       "DOS networking programs!\n");
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	if (ASTATUS() & RESETflag) {
-	  	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	  	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 		ACOMMAND(CFLAGScmd | RESETclear);
 	}
 
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	/* make sure we're ready to receive IRQ's. */
 	AINTMASK(0);
 	udelay(1);		/* give it time to set the mask before
 				 * we reset it again. (may not even be
 				 * necessary)
 				 */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	lp->intmask = NORXflag | RECONflag;
 	AINTMASK(lp->intmask);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 
 	netif_start_queue(dev);
 
@@ -670,14 +670,14 @@ static int arcnet_send_packet(struct sk_buff *skb, struct net_device *dev)
 		freeskb = 0;
 	}
 
-	BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__FUNCTION__,ASTATUS());
+	BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
 	/* make sure we didn't ignore a TX IRQ while we were in here */
 	AINTMASK(0);
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	lp->intmask |= TXFREEflag|EXCNAKflag;
 	AINTMASK(lp->intmask);
-	BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__FUNCTION__,ASTATUS());
+	BUGMSG(D_DEBUG, "%s: %d: %s, status: %x\n",__FILE__,__LINE__,__func__,ASTATUS());
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 	if (freeskb) {
@@ -798,7 +798,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id)
                 diagstatus = (status >> 8) & 0xFF;
 
 		BUGMSG(D_DEBUG, "%s: %d: %s: status=%x\n",
-			__FILE__,__LINE__,__FUNCTION__,status);
+			__FILE__,__LINE__,__func__,status);
 		didsomething = 0;
 
 		/*

drivers/net/arcnet/com20020.c

@@ -238,38 +238,38 @@ static int com20020_reset(struct net_device *dev, int really_reset)
 	u_char inbyte;
 
 	BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
-		__FILE__,__LINE__,__FUNCTION__,dev,lp,dev->name);
+		__FILE__,__LINE__,__func__,dev,lp,dev->name);
 	BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
 	       dev->name, ASTATUS());
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
 	/* power-up defaults */
 	SETCONF;
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 
 	if (really_reset) {
 		/* reset the card */
 		ARCRESET;
 		mdelay(RESETtime * 2);	/* COM20020 seems to be slower sometimes */
 	}
 	/* clear flags & end reset */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
 
 	/* verify that the ARCnet signature byte is present */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 
 	com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 	if (inbyte != TESTvalue) {
-		BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+		BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 		BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
 		return 1;
 	}
 	/* enable extended (512-byte) packets */
 	ACOMMAND(CONFIGcmd | EXTconf);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__FUNCTION__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
 
 	/* done!  return success. */
 	return 0;

drivers/net/atl1e/atl1e_main.c

@@ -2390,9 +2390,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev,
 	}
 
 	/* Init GPHY as early as possible due to power saving issue  */
-	spin_lock(&adapter->mdio_lock);
 	atl1e_phy_init(&adapter->hw);
-	spin_unlock(&adapter->mdio_lock);
 	/* reset the controller to
 	 * put the device in a known good starting state */
 	err = atl1e_reset_hw(&adapter->hw);

drivers/net/au1000_eth.c

@@ -653,6 +653,8 @@ static struct net_device * au1000_probe(int port_num)
 
 	aup = dev->priv;
 
+	spin_lock_init(&aup->lock);
+
 	/* Allocate the data buffers */
 	/* Snooping works fine with eth on all au1xxx */
 	aup->vaddr = (u32)dma_alloc_noncoherent(NULL, MAX_BUF_SIZE *
@@ -753,7 +755,6 @@ static struct net_device * au1000_probe(int port_num)
 		aup->tx_db_inuse[i] = pDB;
 	}
 
-	spin_lock_init(&aup->lock);
 	dev->base_addr = base;
 	dev->irq = irq;
 	dev->open = au1000_open;

drivers/net/ax88796.c

@@ -153,7 +153,7 @@ static void ax_reset_8390(struct net_device *dev)
 	while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
 		if (jiffies - reset_start_time > 2*HZ/100) {
 			dev_warn(&ax->dev->dev, "%s: %s did not complete.\n",
-			       __FUNCTION__, dev->name);
+			       __func__, dev->name);
 			break;
 		}
 	}
@@ -173,7 +173,7 @@ static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
 	if (ei_status.dmaing) {
 		dev_err(&ax->dev->dev, "%s: DMAing conflict in %s "
 			"[DMAstat:%d][irqlock:%d].\n",
-			dev->name, __FUNCTION__,
+			dev->name, __func__,
 			ei_status.dmaing, ei_status.irqlock);
 		return;
 	}
@@ -215,7 +215,7 @@ static void ax_block_input(struct net_device *dev, int count,
 		dev_err(&ax->dev->dev,
 			"%s: DMAing conflict in %s "
 			"[DMAstat:%d][irqlock:%d].\n",
-			dev->name, __FUNCTION__,
+			dev->name, __func__,
 			ei_status.dmaing, ei_status.irqlock);
 		return;
 	}
@@ -260,7 +260,7 @@ static void ax_block_output(struct net_device *dev, int count,
 	if (ei_status.dmaing) {
 		dev_err(&ax->dev->dev, "%s: DMAing conflict in %s."
 			"[DMAstat:%d][irqlock:%d]\n",
-			dev->name, __FUNCTION__,
+			dev->name, __func__,
 		       ei_status.dmaing, ei_status.irqlock);
 		return;
 	}
@@ -396,7 +396,7 @@ ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
 {
 	if (phy_debug)
 		pr_debug("%s: dev %p, %04x, %04x, %d\n",
-			__FUNCTION__, dev, phy_addr, reg, opc);
+			__func__, dev, phy_addr, reg, opc);
 
 	ax_mii_ei_outbits(dev, 0x3f, 6);	/* pre-amble */
 	ax_mii_ei_outbits(dev, 1, 2);		/* frame-start */
@@ -422,7 +422,7 @@ ax_phy_read(struct net_device *dev, int phy_addr, int reg)
       	spin_unlock_irqrestore(&ei_local->page_lock, flags);
 
 	if (phy_debug)
-		pr_debug("%s: %04x.%04x => read %04x\n", __FUNCTION__,
+		pr_debug("%s: %04x.%04x => read %04x\n", __func__,
 			 phy_addr, reg, result);
 
 	return result;
@@ -436,7 +436,7 @@ ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
 	unsigned long flags;
 
 	dev_dbg(&ax->dev->dev, "%s: %p, %04x, %04x %04x\n",
-		__FUNCTION__, dev, phy_addr, reg, value);
+		__func__, dev, phy_addr, reg, value);
 
       	spin_lock_irqsave(&ei->page_lock, flags);
 

drivers/net/bfin_mac.c

@@ -811,7 +811,7 @@ static void bfin_mac_enable(void)
 {
 	u32 opmode;
 
-	pr_debug("%s: %s\n", DRV_NAME, __FUNCTION__);
+	pr_debug("%s: %s\n", DRV_NAME, __func__);
 
 	/* Set RX DMA */
 	bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@@ -847,7 +847,7 @@ static void bfin_mac_enable(void)
 /* Our watchdog timed out. Called by the networking layer */
 static void bfin_mac_timeout(struct net_device *dev)
 {
-	pr_debug("%s: %s\n", dev->name, __FUNCTION__);
+	pr_debug("%s: %s\n", dev->name, __func__);
 
 	bfin_mac_disable();
 
@@ -949,7 +949,7 @@ static int bfin_mac_open(struct net_device *dev)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
 	int retval;
-	pr_debug("%s: %s\n", dev->name, __FUNCTION__);
+	pr_debug("%s: %s\n", dev->name, __func__);
 
 	/*
 	 * Check that the address is valid.  If its not, refuse
@@ -989,7 +989,7 @@ static int bfin_mac_open(struct net_device *dev)
 static int bfin_mac_close(struct net_device *dev)
 {
 	struct bfin_mac_local *lp = netdev_priv(dev);
-	pr_debug("%s: %s\n", dev->name, __FUNCTION__);
+	pr_debug("%s: %s\n", dev->name, __func__);
 
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);

drivers/net/bonding/bond_alb.c

@@ -38,6 +38,7 @@
 #include <linux/in.h>
 #include <net/ipx.h>
 #include <net/arp.h>
+#include <net/ipv6.h>
 #include <asm/byteorder.h>
 #include "bonding.h"
 #include "bond_alb.h"
@@ -81,6 +82,7 @@
 #define RLB_PROMISC_TIMEOUT	10*ALB_TIMER_TICKS_PER_SEC
 
 static const u8 mac_bcast[ETH_ALEN] = {0xff,0xff,0xff,0xff,0xff,0xff};
+static const u8 mac_v6_allmcast[ETH_ALEN] = {0x33,0x33,0x00,0x00,0x00,0x01};
 static const int alb_delta_in_ticks = HZ / ALB_TIMER_TICKS_PER_SEC;
 
 #pragma pack(1)
@@ -1290,6 +1292,7 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 	u32 hash_index = 0;
 	const u8 *hash_start = NULL;
 	int res = 1;
+	struct ipv6hdr *ip6hdr;
 
 	skb_reset_mac_header(skb);
 	eth_data = eth_hdr(skb);
@@ -1319,11 +1322,32 @@ int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 	}
 		break;
 	case ETH_P_IPV6:
+		/* IPv6 doesn't really use broadcast mac address, but leave
+		 * that here just in case.
+		 */
 		if (memcmp(eth_data->h_dest, mac_bcast, ETH_ALEN) == 0) {
 			do_tx_balance = 0;
 			break;
 		}
 
+		/* IPv6 uses all-nodes multicast as an equivalent to
+		 * broadcasts in IPv4.
+		 */
+		if (memcmp(eth_data->h_dest, mac_v6_allmcast, ETH_ALEN) == 0) {
+			do_tx_balance = 0;
+			break;
+		}
+
+		/* Additianally, DAD probes should not be tx-balanced as that
+		 * will lead to false positives for duplicate addresses and
+		 * prevent address configuration from working.
+		 */
+		ip6hdr = ipv6_hdr(skb);
+		if (ipv6_addr_any(&ip6hdr->saddr)) {
+			do_tx_balance = 0;
+			break;
+		}
+
 		hash_start = (char *)&(ipv6_hdr(skb)->daddr);
 		hash_size = sizeof(ipv6_hdr(skb)->daddr);
 		break;

drivers/net/bonding/bond_main.c

@@ -4493,6 +4493,12 @@ static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
 
 static const struct ethtool_ops bond_ethtool_ops = {
 	.get_drvinfo		= bond_ethtool_get_drvinfo,
+	.get_link		= ethtool_op_get_link,
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.get_sg			= ethtool_op_get_sg,
+	.get_tso		= ethtool_op_get_tso,
+	.get_ufo		= ethtool_op_get_ufo,
+	.get_flags		= ethtool_op_get_flags,
 };
 
 /*

drivers/net/bonding/bonding.h

@@ -32,7 +32,7 @@
 #ifdef BONDING_DEBUG
 #define dprintk(fmt, args...) \
 	printk(KERN_DEBUG     \
-	       DRV_NAME ": %s() %d: " fmt, __FUNCTION__, __LINE__ , ## args )
+	       DRV_NAME ": %s() %d: " fmt, __func__, __LINE__ , ## args )
 #else
 #define dprintk(fmt, args...)
 #endif /* BONDING_DEBUG */

drivers/net/cs89x0.c

@@ -1397,9 +1397,7 @@ net_open(struct net_device *dev)
 release_dma:
 #if ALLOW_DMA
 		free_dma(dev->dma);
-#endif
 release_irq:
-#if ALLOW_DMA
 		release_dma_buff(lp);
 #endif
                 writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) & ~(SERIAL_TX_ON | SERIAL_RX_ON));