---

yaml --- r: 361603 b: refs/heads/master c: 47c78f4 h: refs/heads/master i: 361601: abaf001 361599: 445f1b1 v: v3
git-mirror · Mar 13, 2013 · 15917f6 · 15917f6
1 parent d0a8fba
commit 15917f6
Show file tree

Hide file tree

Showing 349 changed files with 1,656 additions and 3,534 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d3c926264a92e5ea448add3e883530e1edad3ce2
+refs/heads/master: 47c78f4a70d791ff44cab3254b489605a52e3181
diff --git a/trunk/CREDITS b/trunk/CREDITS
@@ -1510,14 +1510,6 @@ D: Natsemi ethernet
 D: Cobalt Networks (x86) support
 D: This-and-That
 
-N: Mark M. Hoffman
-E: mhoffman@lightlink.com
-D: asb100, lm93 and smsc47b397 hardware monitoring drivers
-D: hwmon subsystem core
-D: hwmon subsystem maintainer
-D: i2c-sis96x and i2c-stub SMBus drivers
-S: USA
-
 N: Dirk Hohndel
 E: hohndel@suse.de
 D: The XFree86[tm] Project

diff --git a/trunk/Documentation/devicetree/bindings/mfd/ab8500.txt b/trunk/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -13,6 +13,9 @@ Required parent device properties:
                                   4 = active high level-sensitive
                                   8 = active low level-sensitive
 
+Optional parent device properties:
+- reg                    : contains the PRCMU mailbox address for the AB8500 i2c port
+
 The AB8500 consists of a large and varied group of sub-devices:
 
 Device                     IRQ Names              Supply Names   Description
@@ -83,8 +86,9 @@ Non-standard child device properties:
    - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
    - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
 
-ab8500 {
+ab8500@5 {
          compatible = "stericsson,ab8500";
+         reg = <5>; /* mailbox 5 is i2c */
          interrupts = <0 40 0x4>;
          interrupt-controller;
          #interrupt-cells = <2>;

diff --git a/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -11,9 +11,6 @@ Required properties:
 	- "nvidia,tegra20-uart"
 	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
-	- "altr,16550-FIFO32"
-	- "altr,16550-FIFO64"
-	- "altr,16550-FIFO128"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.

diff --git a/trunk/Documentation/hwmon/lm75 b/trunk/Documentation/hwmon/lm75
@@ -23,7 +23,7 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/
   * Microchip (TelCom) TCN75
-    Prefix: 'tcn75'
+    Prefix: 'lm75'
     Addresses scanned: none
     Datasheet: Publicly available at the Microchip website
                http://www.microchip.com/

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1338,6 +1338,12 @@ S:	Maintained
 F:	drivers/platform/x86/asus*.c
 F:	drivers/platform/x86/eeepc*.c
 
+ASUS ASB100 HARDWARE MONITOR DRIVER
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/asb100.c
+
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
 M:	Dan Williams <djbw@fb.com>
 W:	http://sourceforge.net/projects/xscaleiop
@@ -2623,7 +2629,7 @@ F:	include/uapi/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
-L:	intel-gfx@lists.freedesktop.org
+L:	intel-gfx@lists.freedesktop.org (subscribers-only)
 L:	dri-devel@lists.freedesktop.org
 T:	git git://people.freedesktop.org/~danvet/drm-intel
 S:	Supported
@@ -3845,7 +3851,7 @@ F:	drivers/i2c/busses/i2c-ismt.c
 F:	Documentation/i2c/busses/i2c-ismt
 
 I2C/SMBUS STUB DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-stub.c
@@ -3999,22 +4005,6 @@ M:	Stanislaw Gruszka <stf_xl@wp.pl>
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
-INA209 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/ina209
-F:	Documentation/devicetree/bindings/i2c/ina209.txt
-F:	drivers/hwmon/ina209.c
-
-INA2XX HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/ina2xx
-F:	drivers/hwmon/ina2xx.c
-F:	include/linux/platform_data/ina2xx.h
-
 INDUSTRY PACK SUBSYSTEM (IPACK)
 M:	Samuel Iglesias Gonsalvez <siglesias@igalia.com>
 M:	Jens Taprogge <jens.taprogge@taprogge.org>
@@ -5108,15 +5098,6 @@ S:	Maintained
 F:	Documentation/hwmon/max6650
 F:	drivers/hwmon/max6650.c
 
-MAX6697 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/max6697
-F:	Documentation/devicetree/bindings/i2c/max6697.txt
-F:	drivers/hwmon/max6697.c
-F:	include/linux/platform_data/max6697.h
-
 MAXIRADIO FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
@@ -7192,6 +7173,13 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sis/sis900.*
 
+SIS 96X I2C/SMBUS DRIVER
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-sis96x
+F:	drivers/i2c/busses/i2c-sis96x.c
+
 SIS FRAMEBUFFER DRIVER
 M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
@@ -7269,7 +7257,7 @@ F:	Documentation/hwmon/sch5627
 F:	drivers/hwmon/sch5627.c
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc2
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -49,6 +49,7 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
+	select VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -742,7 +743,6 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
-	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -878,7 +878,6 @@ config ARCH_SHARK
 	select ISA_DMA
 	select NEED_MACH_MEMORY_H
 	select PCI
-	select VIRT_TO_BUS
 	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
@@ -1006,12 +1005,12 @@ config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
+	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
 	select ARCH_MULTI_V6_V7
 	select CPU_V6
 
 config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select ARCH_VEXPRESS
@@ -1462,6 +1461,10 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
+config ARCH_NO_VIRT_TO_BUS
+	def_bool y
+	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
+
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool

diff --git a/trunk/arch/arm/boot/dts/at91sam9x5.dtsi b/trunk/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -238,32 +238,8 @@
 				nand {
 					pinctrl_nand: nand-0 {
 						atmel,pins =
-							<3 0 0x1 0x0	/* PD0 periph A Read Enable */
-							 3 1 0x1 0x0	/* PD1 periph A Write Enable */
-							 3 2 0x1 0x0	/* PD2 periph A Address Latch Enable */
-							 3 3 0x1 0x0	/* PD3 periph A Command Latch Enable */
-							 3 4 0x0 0x1	/* PD4 gpio Chip Enable pin pull_up */
-							 3 5 0x0 0x1	/* PD5 gpio RDY/BUSY pin pull_up */
-							 3 6 0x1 0x0	/* PD6 periph A Data bit 0 */
-							 3 7 0x1 0x0	/* PD7 periph A Data bit 1 */
-							 3 8 0x1 0x0	/* PD8 periph A Data bit 2 */
-							 3 9 0x1 0x0	/* PD9 periph A Data bit 3 */
-							 3 10 0x1 0x0	/* PD10 periph A Data bit 4 */
-							 3 11 0x1 0x0	/* PD11 periph A Data bit 5 */
-							 3 12 0x1 0x0	/* PD12 periph A Data bit 6 */
-							 3 13 0x1 0x0>;	/* PD13 periph A Data bit 7 */
-					};
-
-					pinctrl_nand_16bits: nand_16bits-0 {
-						atmel,pins =
-							<3 14 0x1 0x0	/* PD14 periph A Data bit 8 */
-							 3 15 0x1 0x0	/* PD15 periph A Data bit 9 */
-							 3 16 0x1 0x0	/* PD16 periph A Data bit 10 */
-							 3 17 0x1 0x0	/* PD17 periph A Data bit 11 */
-							 3 18 0x1 0x0	/* PD18 periph A Data bit 12 */
-							 3 19 0x1 0x0	/* PD19 periph A Data bit 13 */
-							 3 20 0x1 0x0	/* PD20 periph A Data bit 14 */
-							 3 21 0x1 0x0>;	/* PD21 periph A Data bit 15 */
+							<3 4 0x0 0x1	/* PD5 gpio RDY pin pull_up */
+							 3 5 0x0 0x1>;	/* PD4 gpio enable pin pull_up */
 					};
 				};
 

diff --git a/trunk/arch/arm/boot/dts/dbx5x0.dtsi b/trunk/arch/arm/boot/dts/dbx5x0.dtsi
@@ -319,8 +319,9 @@
 				};
 			};
 
-			ab8500 {
+			ab8500@5 {
 				compatible = "stericsson,ab8500";
+				reg = <5>; /* mailbox 5 is i2c */
 				interrupt-parent = <&intc>;
 				interrupts = <0 40 0x4>;
 				interrupt-controller;

diff --git a/trunk/arch/arm/boot/dts/exynos4.dtsi b/trunk/arch/arm/boot/dts/exynos4.dtsi
@@ -275,27 +275,18 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		mdma1: mdma@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 	};
 };
diff --git a/trunk/arch/arm/boot/dts/exynos5440.dtsi b/trunk/arch/arm/boot/dts/exynos5440.dtsi
@@ -142,18 +142,12 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		pdma1: pdma@121B0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 	};
 

diff --git a/trunk/arch/arm/boot/dts/href.dtsi b/trunk/arch/arm/boot/dts/href.dtsi
@@ -221,7 +221,7 @@
 				};
 			};
 
-			ab8500 {
+			ab8500@5 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";

diff --git a/trunk/arch/arm/boot/dts/hrefv60plus.dts b/trunk/arch/arm/boot/dts/hrefv60plus.dts
@@ -158,7 +158,7 @@
 				};
 			};
 
-			ab8500 {
+			ab8500@5 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";

diff --git a/trunk/arch/arm/boot/dts/snowball.dts b/trunk/arch/arm/boot/dts/snowball.dts
@@ -298,7 +298,7 @@
 				};
 			};
 
-			ab8500 {
+			ab8500@5 {
 				ab8500-regulators {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";

diff --git a/trunk/arch/arm/kernel/smp.c b/trunk/arch/arm/kernel/smp.c
@@ -480,7 +480,7 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
 			  CLOCK_EVT_FEAT_PERIODIC |
 			  CLOCK_EVT_FEAT_DUMMY;
-	evt->rating	= 100;
+	evt->rating	= 400;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
 

diff --git a/trunk/arch/arm/lib/memset.S b/trunk/arch/arm/lib/memset.S
@@ -14,15 +14,31 @@
 
 	.text
 	.align	5
+	.word	0
+
+1:	subs	r2, r2, #4		@ 1 do we have enough
+	blt	5f			@ 1 bytes to align with?
+	cmp	r3, #2			@ 1
+	strltb	r1, [ip], #1		@ 1
+	strleb	r1, [ip], #1		@ 1
+	strb	r1, [ip], #1		@ 1
+	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
+/*
+ * The pointer is now aligned and the length is adjusted.  Try doing the
+ * memset again.
+ */
 
 ENTRY(memset)
-	ands	r3, r0, #3		@ 1 unaligned?
-	mov	ip, r0			@ preserve r0 as return value
-	bne	6f			@ 1
+/*
+ * Preserve the contents of r0 for the return value.
+ */
+	mov	ip, r0
+	ands	r3, ip, #3		@ 1 unaligned?
+	bne	1b			@ 1
 /*
  * we know that the pointer in ip is aligned to a word boundary.
  */
-1:	orr	r1, r1, r1, lsl #8
+	orr	r1, r1, r1, lsl #8
 	orr	r1, r1, r1, lsl #16
 	mov	r3, r1
 	cmp	r2, #16
@@ -111,13 +127,4 @@ ENTRY(memset)
 	tst	r2, #1
 	strneb	r1, [ip], #1
 	mov	pc, lr
-
-6:	subs	r2, r2, #4		@ 1 do we have enough
-	blt	5b			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r1, [ip], #1		@ 1
-	strleb	r1, [ip], #1		@ 1
-	strb	r1, [ip], #1		@ 1
-	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
-	b	1b
 ENDPROC(memset)
diff --git a/trunk/arch/arm/mach-at91/board-foxg20.c b/trunk/arch/arm/mach-at91/board-foxg20.c
@@ -176,7 +176,6 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
 	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
 	.pin		= AT91_PIN_PB16,
 	.is_open_drain  = 1,
-	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {