---

yaml
---
r: 186456
b: refs/heads/master
c: 08b8499
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fb4635932a4e19c2f55383f968a0e9b64da37354
+refs/heads/master: 08b8499bdd26822df16f962db88215d02e40850a

trunk/.gitignore

@@ -36,7 +36,9 @@ modules.builtin
 #
 tags
 TAGS
+linux
 vmlinux
+vmlinuz
 System.map
 Module.markers
 Module.symvers

trunk/Documentation/ABI/stable/sysfs-devices-node

@@ -0,0 +1,7 @@
+What:		/sys/devices/system/node/nodeX
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, this is a directory containing
+		information on node X such as what CPUs are local to the
+		node.

trunk/Documentation/ABI/testing/ima_policy

@@ -20,7 +20,7 @@ Description:
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
-		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
@@ -40,11 +40,11 @@ Description:
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
-			measure func=INODE_PERM mask=MAY_READ uid=0
+			measure func=FILE_CHECK mask=MAY_READ uid=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in inode_permission.
+		open for read by root in do_filp_open.
 
 		Examples of LSM specific definitions:
 
@@ -54,8 +54,8 @@ Description:
 
 			dont_measure obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
-			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
-			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 
 		Smack:
-			measure subj_user=_ func=INODE_PERM mask=MAY_READ
+			measure subj_user=_ func=FILE_CHECK mask=MAY_READ

trunk/Documentation/ABI/testing/sysfs-block

@@ -128,3 +128,17 @@ Description:
 		preferred request size for workloads where sustained
 		throughput is desired.  If no optimal I/O size is
 		reported this file contains 0.
+
+What:		/sys/block/<disk>/queue/nomerges
+Date:		January 2010
+Contact:
+Description:
+		Standard I/O elevator operations include attempts to
+		merge contiguous I/Os. For known random I/O loads these
+		attempts will always fail and result in extra cycles
+		being spent in the kernel. This allows one to turn off
+		this behavior on one of two ways: When set to 1, complex
+		merge checks are disabled, but the simple one-shot merges
+		with the previous I/O request are enabled. When set to 2,
+		all merge tries are disabled. The default value is 0 -
+		which enables all types of merge tries.

trunk/Documentation/ABI/testing/sysfs-bus-usb

@@ -21,25 +21,27 @@ Contact:	Alan Stern <stern@rowland.harvard.edu>
 Description:
 		Each USB device directory will contain a file named
 		power/level.  This file holds a power-level setting for
-		the device, one of "on", "auto", or "suspend".
+		the device, either "on" or "auto".
 
 		"on" means that the device is not allowed to autosuspend,
 		although normal suspends for system sleep will still
 		be honored.  "auto" means the device will autosuspend
 		and autoresume in the usual manner, according to the
-		capabilities of its driver.  "suspend" means the device
-		is forced into a suspended state and it will not autoresume
-		in response to I/O requests.  However remote-wakeup requests
-		from the device may still be enabled (the remote-wakeup
-		setting is controlled separately by the power/wakeup
-		attribute).
+		capabilities of its driver.
 
 		During normal use, devices should be left in the "auto"
-		level.  The other levels are meant for administrative uses.
+		level.  The "on" level is meant for administrative uses.
 		If you want to suspend a device immediately but leave it
 		free to wake up in response to I/O requests, you should
 		write "0" to power/autosuspend.
 
+		Device not capable of proper suspend and resume should be
+		left in the "on" level.  Although the USB spec requires
+		devices to support suspend/resume, many of them do not.
+		In fact so many don't that by default, the USB core
+		initializes all non-hub devices in the "on" level.  Some
+		drivers may change this setting when they are bound.
+
 What:		/sys/bus/usb/devices/.../power/persist
 Date:		May 2007
 KernelVersion:	2.6.23
@@ -157,3 +159,14 @@ Description:
 		device.  This is useful to ensure auto probing won't
 		match the driver to the device.  For example:
 		# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
+
+What:		/sys/bus/usb/device/.../avoid_reset
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch

trunk/Documentation/ABI/testing/sysfs-devices-power

@@ -0,0 +1,79 @@
+What:		/sys/devices/.../power/
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power directory contains attributes
+		allowing the user space to check and modify some power
+		management related properties of given device.
+
+What:		/sys/devices/.../power/wakeup
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/wakeup attribute allows the user
+		space to check if the device is enabled to wake up the system
+		from sleep states, such as the memory sleep state (suspend to
+		RAM) and hibernation (suspend to disk), and to enable or disable
+		it to do that as desired.
+
+		Some devices support "wakeup" events, which are hardware signals
+		used to activate the system from a sleep state.  Such devices
+		have one of the following two values for the sysfs power/wakeup
+		file:
+
+		+ "enabled\n" to issue the events;
+		+ "disabled\n" not to do so;
+
+		In that cases the user space can change the setting represented
+		by the contents of this file by writing either "enabled", or
+		"disabled" to it.
+
+		For the devices that are not capable of generating system wakeup
+		events this file contains "\n".  In that cases the user space
+		cannot modify the contents of this file and the device cannot be
+		enabled to wake up the system.
+
+What:		/sys/devices/.../power/control
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/control attribute allows the user
+		space to control the run-time power management of the device.
+
+		All devices have one of the following two values for the
+		power/control file:
+
+		+ "auto\n" to allow the device to be power managed at run time;
+		+ "on\n" to prevent the device from being power managed;
+
+		The default for all devices is "auto", which means that they may
+		be subject to automatic power management, depending on their
+		drivers.  Changing this attribute to "on" prevents the driver
+		from power managing the device at run time.  Doing that while
+		the device is suspended causes it to be woken up.
+
+What:		/sys/devices/.../power/async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../async attribute allows the user space to
+		enable or diasble the device's suspend and resume callbacks to
+		be executed asynchronously (ie. in separate threads, in parallel
+		with the main suspend/resume thread) during system-wide power
+		transitions (eg. suspend to RAM, hibernation).
+
+		All devices have one of the following two values for the
+		power/async file:
+
+		+ "enabled\n" to permit the asynchronous suspend/resume;
+		+ "disabled\n" to forbid it;
+
+		The value of this attribute may be changed by writing either
+		"enabled", or "disabled" to it.
+
+		It generally is unsafe to permit the asynchronous suspend/resume
+		of a device unless it is certain that all of the PM dependencies
+		of the device are known to the PM core.  However, for some
+		devices this attribute is set to "enabled" by bus type code or
+		device drivers and in that cases it should be safe to leave the
+		default value.

trunk/Documentation/ABI/testing/sysfs-platform-asus-laptop

@@ -1,4 +1,4 @@
-What:		/sys/devices/platform/asus-laptop/display
+What:		/sys/devices/platform/asus_laptop/display
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -13,27 +13,27 @@ Description:
 		Ex: - 0 (0000b) means no display
 		    - 3 (0011b) CRT+LCD.
 
-What:		/sys/devices/platform/asus-laptop/gps
+What:		/sys/devices/platform/asus_laptop/gps
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Control the gps device. 1 means on, 0 means off.
 Users:		Lapsus
 
-What:		/sys/devices/platform/asus-laptop/ledd
+What:		/sys/devices/platform/asus_laptop/ledd
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Some models like the W1N have a LED display that can be
 		used to display several informations.
 		To control the LED display, use the following :
-		    echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
 		The DDD table can be found in Documentation/laptops/asus-laptop.txt
 
-What:		/sys/devices/platform/asus-laptop/bluetooth
+What:		/sys/devices/platform/asus_laptop/bluetooth
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@ Description:
 		This may control the led, the device or both.
 Users:		Lapsus
 
-What:		/sys/devices/platform/asus-laptop/wlan
+What:		/sys/devices/platform/asus_laptop/wlan
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>

trunk/Documentation/ABI/testing/sysfs-platform-eeepc-laptop

@@ -1,4 +1,4 @@
-What:		/sys/devices/platform/eeepc-laptop/disp
+What:		/sys/devices/platform/eeepc/disp
 Date:		May 2008
 KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -9,21 +9,21 @@ Description:
 		- 3 = LCD+CRT
 		If you run X11, you should use xrandr instead.
 
-What:		/sys/devices/platform/eeepc-laptop/camera
+What:		/sys/devices/platform/eeepc/camera
 Date:		May 2008
 KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Control the camera. 1 means on, 0 means off.
 
-What:		/sys/devices/platform/eeepc-laptop/cardr
+What:		/sys/devices/platform/eeepc/cardr
 Date:		May 2008
 KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Control the card reader. 1 means on, 0 means off.
 
-What:		/sys/devices/platform/eeepc-laptop/cpufv
+What:		/sys/devices/platform/eeepc/cpufv
 Date:		Jun 2009
 KernelVersion:	2.6.31
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@ Description:
 		    `------------ Availables modes
 		For example, 0x301 means: mode 1 selected, 3 available modes.
 
-What:		/sys/devices/platform/eeepc-laptop/available_cpufv
+What:		/sys/devices/platform/eeepc/available_cpufv
 Date:		Jun 2009
 KernelVersion:	2.6.31
 Contact:	"Corentin Chary" <corentincj@iksaif.net>

trunk/Documentation/ABI/testing/sysfs-power

@@ -101,3 +101,16 @@ Description:
 
 		CAUTION: Using it will cause your machine's real-time (CMOS)
 		clock to be set to a random invalid time after a resume.
+
+What:		/sys/power/pm_async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/pm_async file controls the switch allowing the
+		user space to enable or disable asynchronous suspend and resume
+		of devices.  If enabled, this feature will cause some device
+		drivers' suspend and resume callbacks to be executed in parallel
+		with each other and with the main suspend thread.  It is enabled
+		if this file contains "1", which is the default.  It may be
+		disabled by writing "0" to this file, in which case all devices
+		will be suspended and resumed synchronously.

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -45,7 +45,7 @@
      </sect1>
 
      <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic_32.h
+!Iarch/x86/include/asm/atomic.h
 !Iarch/x86/include/asm/unaligned.h
      </sect1>
 

trunk/Documentation/DocBook/deviceiobook.tmpl

@@ -316,7 +316,7 @@ CPU B:  spin_unlock_irqrestore(&dev_lock, flags)
 
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
-!Iarch/x86/include/asm/io_32.h
+!Iarch/x86/include/asm/io.h
 !Elib/iomap.c
   </chapter>
 

trunk/Documentation/DocBook/mac80211.tmpl

@@ -144,7 +144,7 @@ usage should require reading the full document.
         this though and the recommendation to allow only a single
         interface in STA mode at first!
       </para>
-!Finclude/net/mac80211.h ieee80211_if_init_conf
+!Finclude/net/mac80211.h ieee80211_vif
     </chapter>
 
     <chapter id="rx-tx">
@@ -234,7 +234,6 @@ usage should require reading the full document.
       <title>Multiple queues and QoS support</title>
       <para>TBD</para>
 !Finclude/net/mac80211.h ieee80211_tx_queue_params
-!Finclude/net/mac80211.h ieee80211_tx_queue_stats
     </chapter>
 
     <chapter id="AP">

trunk/Documentation/DocBook/mtdnand.tmpl

@@ -174,15 +174,15 @@
 		</para>
 		<programlisting>
 static struct mtd_info *board_mtd;
-static unsigned long baseaddr;
+static void __iomem *baseaddr;
 		</programlisting>
 		<para>
 			Static example
 		</para>
 		<programlisting>
 static struct mtd_info board_mtd;
 static struct nand_chip board_chip;
-static unsigned long baseaddr;
+static void __iomem *baseaddr;
 		</programlisting>
 	</sect1>
 	<sect1 id="Partition_defines">
@@ -283,8 +283,8 @@ int __init board_init (void)
 	}
 
 	/* map physical address */
-	baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
-	if(!baseaddr){
+	baseaddr = ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
+	if (!baseaddr) {
 		printk("Ioremap to access NAND chip failed\n");
 		err = -EIO;
 		goto out_mtd;
@@ -316,7 +316,7 @@ int __init board_init (void)
 	goto out;
 
 out_ior:
-	iounmap((void *)baseaddr);
+	iounmap(baseaddr);
 out_mtd:
 	kfree (board_mtd);
 out:
@@ -341,7 +341,7 @@ static void __exit board_cleanup (void)
 	nand_release (board_mtd);
 
 	/* unmap physical address */
-	iounmap((void *)baseaddr);
+	iounmap(baseaddr);
 
 	/* Free the MTD device structure */
 	kfree (board_mtd);