---

yaml
---
r: 275945
b: refs/heads/master
c: c3c3ced
h: refs/heads/master
i:
  275943: 18316ef
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: dd38d298385cb054263e634cf94cf18dc3ae1fc1
+refs/heads/master: c3c3ced77fd1949af753be7731bfdadae88a226b

trunk/arch/powerpc/boot/dts/p1023rds.dts

@@ -449,6 +449,7 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/* IRQ[0:3] are pulled up on board, set to active-low */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 0 1
@@ -488,11 +489,15 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[4:6] only for PCIe, set to active-high,
+			 * IRQ[7] is pulled up on board, set to active-low
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 1
-				0000 0 0 2 &mpic 5 1
-				0000 0 0 3 &mpic 6 1
+				0000 0 0 1 &mpic 4 2
+				0000 0 0 2 &mpic 5 2
+				0000 0 0 3 &mpic 6 2
 				0000 0 0 4 &mpic 7 1
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
@@ -527,12 +532,16 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <16 2>;
 			interrupt-map-mask = <0xf800 0 0 7>;
+			/*
+			 * IRQ[8:10] are pulled up on board, set to active-low
+			 * IRQ[11] only for PCIe, set to active-high,
+			 */
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 8 1
 				0000 0 0 2 &mpic 9 1
 				0000 0 0 3 &mpic 10 1
-				0000 0 0 4 &mpic 11 1
+				0000 0 0 4 &mpic 11 2
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000

trunk/drivers/crypto/mv_cesa.c

@@ -343,13 +343,11 @@ static void mv_process_hash_current(int first_block)
 		else
 			op.config |= CFG_MID_FRAG;
 
-		if (first_block) {
-			writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
-			writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
-			writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
-			writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
-			writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
-		}
+		writel(req_ctx->state[0], cpg->reg + DIGEST_INITIAL_VAL_A);
+		writel(req_ctx->state[1], cpg->reg + DIGEST_INITIAL_VAL_B);
+		writel(req_ctx->state[2], cpg->reg + DIGEST_INITIAL_VAL_C);
+		writel(req_ctx->state[3], cpg->reg + DIGEST_INITIAL_VAL_D);
+		writel(req_ctx->state[4], cpg->reg + DIGEST_INITIAL_VAL_E);
 	}
 
 	memcpy(cpg->sram + SRAM_CONFIG, &op, sizeof(struct sec_accel_config));

trunk/drivers/gpio/gpio-pca953x.c

@@ -546,7 +546,7 @@ static void pca953x_irq_teardown(struct pca953x_chip *chip)
  * Translate OpenFirmware node properties into platform_data
  * WARNING: This is DEPRECATED and will be removed eventually!
  */
-static void
+void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
 	struct device_node *node;
@@ -574,7 +574,7 @@ pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 		*invert = *val;
 }
 #else
-static void
+void
 pca953x_get_alt_pdata(struct i2c_client *client, int *gpio_base, int *invert)
 {
 	*gpio_base = -1;