---

yaml
---
r: 178888
b: refs/heads/master
c: 40da418
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e2b6d02cca533715d6be40fdfc32d3cc47333358
+refs/heads/master: 40da4186a53e59d801130156ecb89fc5830ff227

trunk/Documentation/filesystems/nilfs2.txt

@@ -28,7 +28,7 @@ described in the man pages included in the package.
 Project web page:    http://www.nilfs.org/en/
 Download page:       http://www.nilfs.org/en/download.html
 Git tree web page:   http://www.nilfs.org/git/
-List info:           http://vger.kernel.org/vger-lists.html#linux-nilfs
+NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users
 
 Caveats
 =======

trunk/MAINTAINERS

@@ -3873,7 +3873,7 @@ F:	drivers/net/ni5010.*
 
 NILFS2 FILESYSTEM
 M:	KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
-L:	linux-nilfs@vger.kernel.org
+L:	users@nilfs.org
 W:	http://www.nilfs.org/en/
 S:	Supported
 F:	Documentation/filesystems/nilfs2.txt

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc2
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

trunk/arch/arm/Kconfig

@@ -688,7 +688,6 @@ config ARCH_DAVINCI
 	select HAVE_IDE
 	select COMMON_CLKDEV
 	select GENERIC_ALLOCATOR
-	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's DaVinci platform.
 

trunk/arch/arm/mach-davinci/board-dm355-evm.c

@@ -236,7 +236,6 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM355 EVM",
 	.ccdc = "DM355 CCDC",

trunk/arch/arm/mach-davinci/board-dm365-evm.c

@@ -192,11 +192,7 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
-static int dm365evm_keyscan_enable(struct device *dev)
-{
-	return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
+#ifdef CONFIG_KEYBOARD_DAVINCI
 static unsigned short dm365evm_keymap[] = {
 	KEY_KP2,
 	KEY_LEFT,
@@ -218,7 +214,6 @@ static unsigned short dm365evm_keymap[] = {
 };
 
 static struct davinci_ks_platform_data dm365evm_ks_data = {
-	.device_enable	= dm365evm_keyscan_enable,
 	.keymap		= dm365evm_keymap,
 	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
 	.rep		= 1,
@@ -227,6 +222,7 @@ static struct davinci_ks_platform_data dm365evm_ks_data = {
 	.interval	= 0x2,
 	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
 };
+#endif
 
 static int cpld_mmc_get_cd(int module)
 {
@@ -515,7 +511,10 @@ static __init void dm365_evm_init(void)
 
 	dm365_init_asp(&dm365_evm_snd_data);
 	dm365_init_rtc();
+
+#ifdef CONFIG_KEYBOARD_DAVINCI
 	dm365_init_ks(&dm365evm_ks_data);
+#endif
 }
 
 static __init void dm365_evm_irq_init(void)

trunk/arch/arm/mach-davinci/board-dm644x-evm.c

@@ -247,7 +247,6 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM6446 EVM",
 	.ccdc = "DM6446 CCDC",

trunk/arch/arm/mach-davinci/cp_intc.c

@@ -81,23 +81,12 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
 	return 0;
 }
 
-/*
- * Faking this allows us to to work with suspend functions of
- * generic drivers which call {enable|disable}_irq_wake for
- * wake up interrupt sources (eg RTC on DA850).
- */
-static int cp_intc_set_wake(unsigned int irq, unsigned int on)
-{
-	return 0;
-}
-
 static struct irq_chip cp_intc_irq_chip = {
 	.name		= "cp_intc",
 	.ack		= cp_intc_ack_irq,
 	.mask		= cp_intc_mask_irq,
 	.unmask		= cp_intc_unmask_irq,
 	.set_type	= cp_intc_set_irq_type,
-	.set_wake	= cp_intc_set_wake,
 };
 
 void __init cp_intc_init(void __iomem *base, unsigned short num_irq,

trunk/arch/arm/mach-davinci/devices-da8xx.c

@@ -481,18 +481,11 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
-	int ret;
-
 	/* Unlock the rtc's registers */
 	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
 	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
 
-	ret = platform_device_register(&da8xx_rtc_device);
-	if (!ret)
-		/* Atleast on DA850, RTC is a wakeup source */
-		device_init_wakeup(&da8xx_rtc_device.dev, true);
-
-	return ret;
+	return platform_device_register(&da8xx_rtc_device);
 }
 
 static struct resource da8xx_cpuidle_resources[] = {

trunk/arch/arm/mach-davinci/dm365.c

@@ -993,6 +993,7 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
 {
+	davinci_cfg_reg(DM365_KEYSCAN);
 	dm365_ks_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_ks_device);
 }

trunk/arch/arm/mach-mmp/ttc_dkb.c

@@ -24,6 +24,8 @@
 
 #include "common.h"
 
+#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
+
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,

trunk/arch/arm/mach-mx2/mxt_td60.c

@@ -58,6 +58,21 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PE9_PF_UART3_RXD,
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -246,6 +261,12 @@ static struct imxuart_platform_data uart_pdata[] = {
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
@@ -257,6 +278,9 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,

trunk/arch/arm/mach-mx25/clock.c

@@ -173,7 +173,6 @@ DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
 DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -205,7 +204,6 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
 int __init mx25_clocks_init(unsigned long fref)

trunk/arch/arm/mach-mx25/devices.c

@@ -419,22 +419,3 @@ int __init mxc_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
-static struct resource mx25_fec_resources[] = {
-	{
-		.start	= MX25_FEC_BASE_ADDR,
-		.end	= MX25_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_FEC,
-		.end	= MX25_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx25_fec_device = {
-	.name	= "fec",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
-	.resource	= mx25_fec_resources,
-};

trunk/arch/arm/mach-mx25/devices.h

@@ -17,4 +17,3 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
-extern struct platform_device mx25_fec_device;

trunk/arch/arm/mach-mx25/mx25pdk.c

@@ -18,11 +18,10 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/fec.h>
+#include <linux/smsc911x.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -36,57 +35,16 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux.h>
+#include <mach/iomux-v3.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct pad_desc mx25pdk_pads[] = {
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
-	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-};
-
-static struct fec_platform_data mx25_fec_pdata = {
-        .phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO		35
-#define FEC_RESET_B_GPIO	104
-
-static void __init mx25pdk_fec_reset(void)
-{
-	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
-	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
-	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
-	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
-	udelay(2);
-
-	/* turn on PHY power and lift reset */
-	gpio_set_value(FEC_ENABLE_GPIO, 1);
-	gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
 static void __init mx25pdk_init(void)
 {
-	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
-			ARRAY_SIZE(mx25pdk_pads));
-
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-
-	mx25pdk_fec_reset();
-	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)

trunk/arch/arm/mach-mx3/Kconfig

@@ -49,7 +49,6 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
-	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -64,7 +63,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	select MXC_ULPI if USB_ULPI
+	select MXC_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.

trunk/arch/arm/mach-mx3/mm.c

@@ -65,11 +65,6 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
 	},
 };
 

trunk/arch/arm/mach-mx3/mx31ads.c

@@ -494,6 +494,11 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
+		.virtual	= SPBA0_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length		= SPBA0_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,

trunk/arch/arm/mach-mx3/mx31lite.c

@@ -135,7 +135,6 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
-#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -181,7 +180,6 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
-#endif
 
 /*
  * NOR flash
@@ -214,6 +212,11 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
+	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -258,13 +261,11 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
-#if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-#endif
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");