---

yaml
---
r: 146235
b: refs/heads/master
c: ace08c3
h: refs/heads/master
i:
  146233: b696655
  146231: 5b2f8f4
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 991ec02cdca33b03a132a0cacfe6f0aa0be9aa8d
+refs/heads/master: ace08c3c4403140e5ce82116c8f2acb38f58f61d

trunk/Documentation/DMA-API.txt

@@ -704,24 +704,12 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
-	dma-api/driver-filter
-				You can write a name of a driver into this file
-				to limit the debug output to requests from that
-				particular driver. Write an empty string to
-				that file to disable the filter and see
-				all errors again.
-
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
-If you want to see debug messages only for a special device driver you can
-specify the dma_debug_driver=<drivername> parameter. This will enable the
-driver filter at boot time. The debug code will only print errors for that
-driver afterwards. This filter can be disabled or changed later using debugfs.
-
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you

trunk/Documentation/DocBook/Makefile

@@ -13,8 +13,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml \
-	    tracepoint.xml
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):

trunk/Documentation/RCU/trace.txt

@@ -192,24 +192,23 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu:
-rcu:
-  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
-  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
-  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
-  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
-  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
-  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
-  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
-  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
+  0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
+  1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
+  2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
+  3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
+  4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
+  5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
+  6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
+  7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
 rcu_bh:
-  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
-  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
-  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
-  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
+  1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
+  2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
+  3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
+  4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
+  5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
+  6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
+  7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
 
 The first section lists the rcu_data structures for rcu, the second for
 rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
@@ -254,6 +253,12 @@ o	"pqc" indicates which grace period the last-observed quiescent
 o	"qp" indicates that RCU still expects a quiescent state from
 	this CPU.
 
+o	"rpfq" is the number of rcu_pending() calls on this CPU required
+	to induce this CPU to invoke force_quiescent_state().
+
+o	"rp" is low-order four hex digits of the count of how many times
+	rcu_pending() has been invoked on this CPU.
+
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
 	scheduler or by irq.  The number after the "/" is the interrupt
@@ -300,9 +305,6 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
-There is also an rcu/rcudata.csv file with the same information in
-comma-separated-variable spreadsheet format.
-
 
 The output of "cat rcu/rcugp" looks as follows:
 
@@ -409,63 +411,3 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		For example, the first entry at the lowest level shows
 		"^0", indicating that it corresponds to bit zero in
 		the first entry at the middle level.
-
-
-The output of "cat rcu/rcu_pending" looks as follows:
-
-rcu:
-  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
-  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
-  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
-  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
-  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
-  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
-  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
-  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
-rcu_bh:
-  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
-  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
-  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
-  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
-  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
-  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
-  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
-  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
-
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
-
-o	"np" is the number of times that __rcu_pending() has been invoked
-	for the corresponding flavor of RCU.
-
-o	"qsp" is the number of times that the RCU was waiting for a
-	quiescent state from this CPU.
-
-o	"cbr" is the number of times that this CPU had RCU callbacks
-	that had passed through a grace period, and were thus ready
-	to be invoked.
-
-o	"cng" is the number of times that this CPU needed another
-	grace period while RCU was idle.
-
-o	"gpc" is the number of times that an old grace period had
-	completed, but this CPU was not yet aware of it.
-
-o	"gps" is the number of times that a new grace period had started,
-	but this CPU was not yet aware of it.
-
-o	"nf" is the number of times that this CPU suspected that the
-	current grace period had run for too long, and thus needed to
-	be forced.
-
-	Please note that "forcing" consists of sending resched IPIs
-	to holdout CPUs.  If that CPU really still is in an old RCU
-	read-side critical section, then we really do have to wait for it.
-	The assumption behing "forcing" is that the CPU is not still in
-	an old RCU read-side critical section, but has not yet responded
-	for some other reason.
-
-o	"nn" is the number of times that this CPU needed nothing.  Alert
-	readers will note that the rcu "nn" number for a given CPU very
-	closely matches the rcu_bh "np" number for that same CPU.  This
-	is due to short-circuit evaluation in rcu_pending().