V4L/DVB (7584): Fix build that occurs when CONFIG_VIDEO_PMS=y and VID…

…EO_V4L2_COMMON=m

This patch removes zoran checks for VIDEO_V4L2, since this API is always
present, when V4L is selected.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/Kconfig

@@ -30,7 +30,7 @@ config VIDEO_V4L2_COMMON
 	depends on (I2C || I2C=n) && VIDEO_DEV
 	default (I2C || I2C=n) && VIDEO_DEV
 
-config VIDEO_V4L1
+config VIDEO_ALLOW_V4L1
 	bool "Enable Video For Linux API 1 (DEPRECATED)"
 	depends on VIDEO_DEV && VIDEO_V4L2_COMMON
 	default VIDEO_DEV && VIDEO_V4L2_COMMON
@@ -59,10 +59,15 @@ config VIDEO_V4L1_COMPAT
 	  If you are unsure as to whether this is required, answer Y.
 
 config VIDEO_V4L2
-	bool
+	tristate
 	depends on VIDEO_DEV && VIDEO_V4L2_COMMON
 	default VIDEO_DEV && VIDEO_V4L2_COMMON
 
+config VIDEO_V4L1
+	tristate
+	depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+	default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+
 source "drivers/media/video/Kconfig"
 
 source "drivers/media/radio/Kconfig"

drivers/media/video/msp3400-driver.c

@@ -366,7 +366,7 @@ int msp_sleep(struct msp_state *state, int timeout)
 }
 
 /* ------------------------------------------------------------------------ */
-#ifdef CONFIG_VIDEO_V4L1
+#ifdef CONFIG_VIDEO_ALLOW_V4L1
 static int msp_mode_v4l2_to_v4l1(int rxsubchans, int audmode)
 {
 	if (rxsubchans == V4L2_TUNER_SUB_MONO)
@@ -514,7 +514,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
 	/* --- v4l ioctls --- */
 	/* take care: bttv does userspace copying, we'll get a
 	   kernel pointer here... */
-#ifdef CONFIG_VIDEO_V4L1
+#ifdef CONFIG_VIDEO_ALLOW_V4L1
 	case VIDIOCGAUDIO:
 	{
 		struct video_audio *va = arg;

drivers/media/video/tuner-core.c

@@ -758,7 +758,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
 		if (analog_ops->standby)
 			analog_ops->standby(&t->fe);
 		break;
-#ifdef CONFIG_VIDEO_V4L1
+#ifdef CONFIG_VIDEO_ALLOW_V4L1
 	case VIDIOCSAUDIO:
 		if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
 			return 0;

drivers/media/video/zoran.h

@@ -243,10 +243,8 @@ struct zoran_format {
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	int palette;
 #endif
-#ifdef CONFIG_VIDEO_V4L2
 	__u32 fourcc;
 	int colorspace;
-#endif
 	int depth;
 	__u32 flags;
 	__u32 vfespfr;
@@ -271,20 +269,6 @@ struct zoran_v4l_settings {
 	const struct zoran_format *format;	/* capture format */
 };
 
-/* whoops, this one is undeclared if !v4l2 */
-#ifndef CONFIG_VIDEO_V4L2
-struct v4l2_jpegcompression {
-	int quality;
-	int APPn;
-	int APP_len;
-	char APP_data[60];
-	int COM_len;
-	char COM_data[60];
-	__u32 jpeg_markers;
-	__u8 reserved[116];
-};
-#endif
-
 /* jpg-capture/-playback settings */
 struct zoran_jpg_settings {
 	int decimation;		/* this bit is used to set everything to default */

drivers/media/video/zoran_driver.c

@@ -85,7 +85,6 @@
 #include "zoran_device.h"
 #include "zoran_card.h"
 
-#ifdef CONFIG_VIDEO_V4L2
 	/* we declare some card type definitions here, they mean
 	 * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */
 #define ZORAN_V4L2_VID_FLAGS ( \
@@ -94,19 +93,15 @@
 				V4L2_CAP_VIDEO_OUTPUT |\
 				V4L2_CAP_VIDEO_OVERLAY \
 			      )
-#endif
 
 #include <asm/byteorder.h>
 
-#if defined(CONFIG_VIDEO_V4L2) && defined(CONFIG_VIDEO_V4L1_COMPAT)
+#if defined(CONFIG_VIDEO_V4L1_COMPAT)
 #define ZFMT(pal, fcc, cs) \
 	.palette = (pal), .fourcc = (fcc), .colorspace = (cs)
-#elif defined(CONFIG_VIDEO_V4L2)
-#define ZFMT(pal, fcc, cs) \
-	.fourcc = (fcc), .colorspace = (cs)
 #else
 #define ZFMT(pal, fcc, cs) \
-	.palette = (pal)
+	.fourcc = (fcc), .colorspace = (cs)
 #endif
 
 const struct zoran_format zoran_formats[] = {
@@ -209,7 +204,6 @@ static int lock_norm;	/* 0 = default 1 = Don't change TV standard (norm) */
 module_param(lock_norm, int, 0644);
 MODULE_PARM_DESC(lock_norm, "Prevent norm changes (1 = ignore, >1 = fail)");
 
-#ifdef CONFIG_VIDEO_V4L2
 	/* small helper function for calculating buffersizes for v4l2
 	 * we calculate the nearest higher power-of-two, which
 	 * will be the recommended buffersize */
@@ -232,7 +226,6 @@ zoran_v4l2_calc_bufsize (struct zoran_jpg_settings *settings)
 		return 8192;
 	return result;
 }
-#endif
 
 /* forward references */
 static void v4l_fbuffer_free(struct file *file);
@@ -1709,7 +1702,6 @@ setup_overlay (struct file *file,
 	return wait_grab_pending(zr);
 }
 
-#ifdef CONFIG_VIDEO_V4L2
 	/* get the status of a buffer in the clients buffer queue */
 static int
 zoran_v4l2_buffer_status (struct file        *file,
@@ -1815,7 +1807,6 @@ zoran_v4l2_buffer_status (struct file        *file,
 
 	return 0;
 }
-#endif
 
 static int
 zoran_set_norm (struct zoran *zr,
@@ -2624,8 +2615,6 @@ zoran_do_ioctl (struct inode *inode,
 	}
 		break;
 
-#ifdef CONFIG_VIDEO_V4L2
-
 		/* The new video4linux2 capture interface - much nicer than video4linux1, since
 		 * it allows for integrating the JPEG capturing calls inside standard v4l2
 		 */
@@ -4197,7 +4186,6 @@ zoran_do_ioctl (struct inode *inode,
 		return 0;
 	}
 		break;
-#endif
 
 	default:
 		dprintk(1, KERN_DEBUG "%s: UNKNOWN ioctl cmd: 0x%x\n",
@@ -4657,9 +4645,7 @@ static const struct file_operations zoran_fops = {
 struct video_device zoran_template __devinitdata = {
 	.name = ZORAN_NAME,
 	.type = ZORAN_VID_TYPE,
-#ifdef CONFIG_VIDEO_V4L2
 	.type2 = ZORAN_V4L2_VID_FLAGS,
-#endif
 	.fops = &zoran_fops,
 	.release = &zoran_vdev_release,
 	.minor = -1