Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/cmarinas/linux-aarch64

Pull ARM64 updates from Catalin Marinas:
 "Main features:
   - KVM and Xen ports to AArch64
   - Hugetlbfs and transparent huge pages support for arm64
   - Applied Micro X-Gene Kconfig entry and dts file
   - Cache flushing improvements

  For arm64 huge pages support, there are x86 changes moving part of
  arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits)
  arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board
  arm64: Add defines for APM ARMv8 implementation
  arm64: Enable APM X-Gene SOC family in the defconfig
  arm64: Add Kconfig option for APM X-Gene SOC family
  arm64/Makefile: provide vdso_install target
  ARM64: mm: THP support.
  ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
  ARM64: mm: HugeTLB support.
  ARM64: mm: Move PTE_PROT_NONE bit.
  ARM64: mm: Make PAGE_NONE pages read only and no-execute.
  ARM64: mm: Restore memblock limit when map_mem finished.
  mm: thp: Correct the HPAGE_PMD_ORDER check.
  x86: mm: Remove general hugetlb code from x86.
  mm: hugetlb: Copy general hugetlb code from x86 to mm.
  x86: mm: Remove x86 version of huge_pmd_share.
  mm: hugetlb: Copy huge_pmd_share from x86 to mm.
  arm64: KVM: document kernel object mappings in HYP
  arm64: KVM: MAINTAINERS update
  arm64: KVM: userspace API documentation
  arm64: KVM: enable initialization of a 32bit vcpu
  ...

Documentation/arm64/memory.txt

@@ -73,3 +73,10 @@ Translation table lookup with 64KB pages:
  |                 |    +--------------------------> [41:29] L2 index (only 38:29 used)
  |                 +-------------------------------> [47:42] L1 index (not used)
  +-------------------------------------------------> [63] TTBR0/1
+
+When using KVM, the hypervisor maps kernel pages in EL2, at a fixed
+offset from the kernel VA (top 24bits of the kernel VA set to zero):
+
+Start			End			Size		Use
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		kernel objects mapped in HYP

Documentation/virtual/kvm/api.txt

@@ -280,7 +280,7 @@ kvm_run' (see below).
 4.11 KVM_GET_REGS
 
 Capability: basic
-Architectures: all except ARM
+Architectures: all except ARM, arm64
 Type: vcpu ioctl
 Parameters: struct kvm_regs (out)
 Returns: 0 on success, -1 on error
@@ -301,7 +301,7 @@ struct kvm_regs {
 4.12 KVM_SET_REGS
 
 Capability: basic
-Architectures: all except ARM
+Architectures: all except ARM, arm64
 Type: vcpu ioctl
 Parameters: struct kvm_regs (in)
 Returns: 0 on success, -1 on error
@@ -587,22 +587,22 @@ struct kvm_fpu {
 4.24 KVM_CREATE_IRQCHIP
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64, ARM
+Architectures: x86, ia64, ARM, arm64
 Type: vm ioctl
 Parameters: none
 Returns: 0 on success, -1 on error
 
 Creates an interrupt controller model in the kernel.  On x86, creates a virtual
 ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
 local APIC.  IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
-only go to the IOAPIC.  On ia64, a IOSAPIC is created. On ARM, a GIC is
+only go to the IOAPIC.  On ia64, a IOSAPIC is created. On ARM/arm64, a GIC is
 created.
 
 
 4.25 KVM_IRQ_LINE
 
 Capability: KVM_CAP_IRQCHIP
-Architectures: x86, ia64, arm
+Architectures: x86, ia64, arm, arm64
 Type: vm ioctl
 Parameters: struct kvm_irq_level
 Returns: 0 on success, -1 on error
@@ -612,9 +612,10 @@ On some architectures it is required that an interrupt controller model has
 been previously created with KVM_CREATE_IRQCHIP.  Note that edge-triggered
 interrupts require the level to be set to 1 and then back to 0.
 
-ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip
-(GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for
-specific cpus.  The irq field is interpreted like this:
+ARM/arm64 can signal an interrupt either at the CPU level, or at the
+in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
+use PPIs designated for specific cpus.  The irq field is interpreted
+like this:
 
   bits:  | 31 ... 24 | 23  ... 16 | 15    ...    0 |
   field: | irq_type  | vcpu_index |     irq_id     |
@@ -1831,6 +1832,22 @@ ARM 32-bit VFP control registers have the following id bit patterns:
 ARM 64-bit FP registers have the following id bit patterns:
   0x4030 0000 0012 0 <regno:12>
 
+
+arm64 registers are mapped using the lower 32 bits. The upper 16 of
+that is the register group type, or coprocessor number:
+
+arm64 core/FP-SIMD registers have the following id bit patterns. Note
+that the size of the access is variable, as the kvm_regs structure
+contains elements ranging from 32 to 128 bits. The index is a 32bit
+value in the kvm_regs structure seen as a 32bit array.
+  0x60x0 0000 0010 <index into the kvm_regs struct:16>
+
+arm64 CCSIDR registers are demultiplexed by CSSELR value:
+  0x6020 0000 0011 00 <csselr:8>
+
+arm64 system registers have the following id bit patterns:
+  0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3>
+
 4.69 KVM_GET_ONE_REG
 
 Capability: KVM_CAP_ONE_REG
@@ -2264,7 +2281,7 @@ current state.  "addr" is ignored.
 4.77 KVM_ARM_VCPU_INIT
 
 Capability: basic
-Architectures: arm
+Architectures: arm, arm64
 Type: vcpu ioctl
 Parameters: struct struct kvm_vcpu_init (in)
 Returns: 0 on success; -1 on error
@@ -2283,12 +2300,14 @@ should be created before this ioctl is invoked.
 Possible features:
 	- KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state.
 	  Depends on KVM_CAP_ARM_PSCI.
+	- KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
+	  Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
 
 
 4.78 KVM_GET_REG_LIST
 
 Capability: basic
-Architectures: arm
+Architectures: arm, arm64
 Type: vcpu ioctl
 Parameters: struct kvm_reg_list (in/out)
 Returns: 0 on success; -1 on error
@@ -2308,7 +2327,7 @@ KVM_GET_ONE_REG/KVM_SET_ONE_REG calls.
 4.80 KVM_ARM_SET_DEVICE_ADDR
 
 Capability: KVM_CAP_ARM_SET_DEVICE_ADDR
-Architectures: arm
+Architectures: arm, arm64
 Type: vm ioctl
 Parameters: struct kvm_arm_device_address (in)
 Returns: 0 on success, -1 on error
@@ -2329,18 +2348,19 @@ can access emulated or directly exposed devices, which the host kernel needs
 to know about. The id field is an architecture specific identifier for a
 specific device.
 
-ARM divides the id field into two parts, a device id and an address type id
-specific to the individual device.
+ARM/arm64 divides the id field into two parts, a device id and an
+address type id specific to the individual device.
 
   bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
   field: |        0x00000000      |     device id   |  addr type id  |
 
-ARM currently only require this when using the in-kernel GIC support for the
-hardware VGIC features, using KVM_ARM_DEVICE_VGIC_V2 as the device id.  When
-setting the base address for the guest's mapping of the VGIC virtual CPU
-and distributor interface, the ioctl must be called after calling
-KVM_CREATE_IRQCHIP, but before calling KVM_RUN on any of the VCPUs.  Calling
-this ioctl twice for any of the base addresses will return -EEXIST.
+ARM/arm64 currently only require this when using the in-kernel GIC
+support for the hardware VGIC features, using KVM_ARM_DEVICE_VGIC_V2
+as the device id.  When setting the base address for the guest's
+mapping of the VGIC virtual CPU and distributor interface, the ioctl
+must be called after calling KVM_CREATE_IRQCHIP, but before calling
+KVM_RUN on any of the VCPUs.  Calling this ioctl twice for any of the
+base addresses will return -EEXIST.
 
 4.82 KVM_PPC_RTAS_DEFINE_TOKEN
 

MAINTAINERS

@@ -4739,6 +4739,15 @@ F:	arch/arm/include/uapi/asm/kvm*
 F:	arch/arm/include/asm/kvm*
 F:	arch/arm/kvm/
 
+KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)
+M:	Marc Zyngier <marc.zyngier@arm.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	kvmarm@lists.cs.columbia.edu
+S:	Maintained
+F:	arch/arm64/include/uapi/asm/kvm*
+F:	arch/arm64/include/asm/kvm*
+F:	arch/arm64/kvm/
+
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://kernel.org/pub/linux/utils/kernel/kexec/
@@ -9135,6 +9144,13 @@ S:	Supported
 F:	arch/arm/xen/
 F:	arch/arm/include/asm/xen/
 
+XEN HYPERVISOR ARM64
+M:	Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
+S:	Supported
+F:	arch/arm64/xen/
+F:	arch/arm64/include/asm/xen/
+
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)

arch/arm/include/asm/xen/page.h

@@ -1,7 +1,6 @@
 #ifndef _ASM_ARM_XEN_PAGE_H
 #define _ASM_ARM_XEN_PAGE_H
 
-#include <asm/mach/map.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 
@@ -88,6 +87,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 	return __set_phys_to_machine(pfn, mfn);
 }
 
-#define xen_remap(cookie, size) __arm_ioremap((cookie), (size), MT_MEMORY);
+#define xen_remap(cookie, size) ioremap_cached((cookie), (size));
 
 #endif /* _ASM_ARM_XEN_PAGE_H */

arch/arm/kvm/arch_timer.c

@@ -195,6 +195,7 @@ static struct notifier_block kvm_timer_cpu_nb = {
 
 static const struct of_device_id arch_timer_of_match[] = {
 	{ .compatible	= "arm,armv7-timer",	},
+	{ .compatible	= "arm,armv8-timer",	},
 	{},
 };
 

arch/arm64/Kconfig

@@ -7,6 +7,7 @@ config ARM64
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
+	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
@@ -111,6 +112,11 @@ config ARCH_VEXPRESS
 	  This enables support for the ARMv8 software model (Versatile
 	  Express).
 
+config ARCH_XGENE
+	bool "AppliedMicro X-Gene SOC Family"
+	help
+	  This enables support for AppliedMicro X-Gene SOC Family
+
 endmenu
 
 menu "Bus support"
@@ -148,6 +154,8 @@ config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
+	# These have to remain sorted largest to smallest
+	default "8" if ARCH_XGENE
 	default "4"
 
 source kernel/Kconfig.preempt
@@ -180,8 +188,35 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SYS_SUPPORTS_HUGETLBFS
+	def_bool y
+
+config ARCH_WANT_GENERAL_HUGETLB
+	def_bool y
+
+config ARCH_WANT_HUGE_PMD_SHARE
+	def_bool y if !ARM64_64K_PAGES
+
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	def_bool y
+
 source "mm/Kconfig"
 
+config XEN_DOM0
+	def_bool y
+	depends on XEN
+
+config XEN
+	bool "Xen guest support on ARM64 (EXPERIMENTAL)"
+	depends on ARM64 && OF
+	help
+	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
+
+config FORCE_MAX_ZONEORDER
+	int
+	default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
+	default "11"
+
 endmenu
 
 menu "Boot options"

arch/arm64/Makefile

@@ -37,6 +37,8 @@ TEXT_OFFSET := 0x00080000
 export	TEXT_OFFSET GZFLAGS
 
 core-y		+= arch/arm64/kernel/ arch/arm64/mm/
+core-$(CONFIG_KVM) += arch/arm64/kvm/
+core-$(CONFIG_XEN) += arch/arm64/xen/
 libs-y		:= arch/arm64/lib/ $(libs-y)
 libs-y		+= $(LIBGCC)
 
@@ -60,6 +62,10 @@ zinstall install: vmlinux
 dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot)/dts dtbs
 
+PHONY += vdso_install
+vdso_install:
+	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
+
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)

arch/arm64/boot/dts/Makefile

@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
 
 targets += dtbs
 targets += $(dtb-y)

arch/arm64/boot/dts/apm-mustang.dts

@@ -0,0 +1,26 @@
+/*
+ * dts file for AppliedMicro (APM) Mustang Board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm.dtsi"
+
+/ {
+	model = "APM X-Gene Mustang board";
+	compatible = "apm,mustang", "apm,xgene-storm";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
+	};
+};