sh: Get the mach-cayman IRQ support building.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/irq/Makefile

@@ -4,5 +4,6 @@
 obj-y	+= intc.o
 
 obj-$(CONFIG_SUPERH32)			+= imask.o
+obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o
 obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
 obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o

arch/sh64/kernel/irq_intc.c → arch/sh/kernel/cpu/irq/intc-sh5.c

@@ -14,21 +14,14 @@
  * controller.
  *
  */
-
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/bitops.h>       /* this includes also <asm/registers.h */
-                                /* which is required to remap register */
-                                /* names used into __asm__ blocks...   */
-
-#include <asm/hardware.h>
-#include <asm/platform.h>
+#include <linux/bitops.h>
+#include <asm/cpu/irq.h>
 #include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
 
 /*
  * Maybe the generic Peripheral block could move to a more
@@ -192,7 +185,7 @@ int intc_irq_describe(char* p, int irq)
 }
 #endif
 
-void __init init_IRQ(void)
+void __init plat_irq_setup(void)
 {
         unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
 	unsigned long reg;
@@ -251,14 +244,6 @@ void __init init_IRQ(void)
 		}
 	}
 
-#ifdef CONFIG_SH_CAYMAN
-	{
-		extern void init_cayman_irq(void);
-
-		init_cayman_irq();
-	}
-#endif
-
 	/*
 	 * And now let interrupts come in.
 	 * sti() is not enough, we need to

arch/sh/kernel/cpu/sh5/Makefile

@@ -5,7 +5,3 @@ obj-y := entry.o probe.o switchto.o
 
 obj-$(CONFIG_SH_FPU)		+= fpu.o
 obj-$(CONFIG_KALLSYMS)		+= unwind.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH5_101)	+= setup-sh5-101.o
-obj-$(CONFIG_CPU_SUBTYPE_SH5_103)	+= setup-sh5-101.o

arch/sh/mach-cayman/Makefile

@@ -1,11 +1,5 @@
 #
 # Makefile for the Hitachi Cayman specific parts of the kernel
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-obj-y := setup.o irq.o iomap.o
+obj-y := setup.o irq.o
 obj-$(CONFIG_HEARTBEAT)	+= led.o
-

arch/sh/mach-cayman/irq.c

@@ -1,24 +1,26 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/irq_cayman.c
- *
- * SH-5 Cayman Interrupt Support
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
  *
  * This file handles the board specific parts of the Cayman interrupt system
  *
  * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/signal.h>
-#include <asm/cayman.h>
+#include <asm/cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
 
 unsigned long epld_virt;
 

arch/sh/mach-cayman/setup.c

@@ -1,28 +1,19 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/mach-cayman/setup.c
+ * arch/sh/mach-cayman/setup.c
  *
  * SH5 Cayman support
  *
- * This file handles the architecture-dependent parts of initialization
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
  *
- * Copyright David J. Mckay.
- * Needs major work!
- *
- * benedict.gaster@superh.com:	 3rd May 2002
- *    Added support for ramdisk, removing statically linked romfs at the same time.
- *
- * lethal@linux-sh.org:          15th May 2003
- *    Use the generic procfs cpuinfo interface, just return a valid board name.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
-#include <asm/platform.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <asm/cpu/irq.h>
 
 /*
  * Platform Dependent Interrupt Priorities.
@@ -96,42 +87,6 @@
 
 unsigned long smsc_superio_virt;
 
-/*
- * Platform dependent structures: maps and parms block.
- */
-struct resource io_resources[] = {
-	/* To be updated with external devices */
-};
-
-struct resource kram_resources[] = {
-	/* These must be last in the array */
-	{ .name = "Kernel code", .start = 0, .end = 0 },
-	/* These must be last in the array */
-	{ .name = "Kernel data", .start = 0, .end = 0 }
-};
-
-struct resource xram_resources[] = {
-	/* To be updated with external devices */
-};
-
-struct resource rom_resources[] = {
-	/* To be updated with external devices */
-};
-
-struct sh64_platform platform_parms = {
-	.readonly_rootfs =	1,
-	.initial_root_dev =	0x0100,
-	.loader_type =		1,
-	.io_res_p =		io_resources,
-	.io_res_count =		ARRAY_SIZE(io_resources),
-	.kram_res_p =		kram_resources,
-	.kram_res_count =	ARRAY_SIZE(kram_resources),
-	.xram_res_p =		xram_resources,
-	.xram_res_count =	ARRAY_SIZE(xram_resources),
-	.rom_res_p =		rom_resources,
-	.rom_res_count =	ARRAY_SIZE(rom_resources),
-};
-
 int platform_int_priority[NR_INTC_IRQS] = {
 	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
 	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
@@ -210,30 +165,23 @@ static int __init smsc_superio_setup(void)
 
 	return 0;
 }
-
-/* This is grotty, but, because kernel is always referenced on the link line
- * before any devices, this is safe.
- */
 __initcall(smsc_superio_setup);
 
-void __init platform_setup(void)
-{
-	/* Cayman platform leaves the decision to head.S, for now */
-	platform_parms.fpu_flags = fpu_in_use;
-}
-
-void __init platform_monitor(void)
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
 {
-	/* Nothing yet .. */
-}
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
 
-void __init platform_reserve(void)
-{
-	/* Nothing yet .. */
+	return (void __iomem *)port;
 }
 
-const char *get_system_type(void)
-{
-	return "Hitachi Cayman";
-}
+extern void init_cayman_irq(void);
 
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_nr_irqs		= 64,
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};

include/asm-sh/cpu-sh5/irq.h

@@ -92,9 +92,6 @@
 #define NR_EXT_IRQS	0
 #endif
 
-#define NR_IRQS		(NR_INTC_IRQS+NR_EXT_IRQS)
-
-
 /* Default IRQs, fixed */
 #define TIMER_IRQ	IRQ_TUNI0
 #define RTC_IRQ		IRQ_CUI
@@ -116,29 +113,6 @@
 
 extern int intc_evt_to_irq[(0xE20/0x20)+1];
 int intc_irq_describe(char* p, int irq);
-
-#define irq_canonicalize(irq)	(irq)
-
-#ifdef CONFIG_SH_CAYMAN
-int cayman_irq_demux(int evt);
-int cayman_irq_describe(char* p, int irq);
-#define irq_demux(x) cayman_irq_demux(x)
-#define irq_describe(p, x) cayman_irq_describe(p, x)
-#else
-#define irq_demux(x) (intc_evt_to_irq[x])
-#define irq_describe(p, x) intc_irq_describe(p, x)
-#endif
-
-/*
- * Function for "on chip support modules".
- */
-
-/*
- * SH-5 supports Priority based interrupts only.
- * Interrupt priorities are defined at platform level.
- */
-#define set_ipr_data(a, b, c, d)
-#define make_ipr_irq(a)
-#define make_imask_irq(a)
+extern int platform_int_priority[NR_INTC_IRQS];
 
 #endif /* __ASM_SH64_IRQ_H */