Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless into for-davem

drivers/net/wireless/ath/ath9k/hif_usb.c

@@ -1295,7 +1295,9 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 
 	usb_set_intfdata(interface, NULL);
 
-	if (!unplugged && (hif_dev->flags & HIF_USB_START))
+	/* If firmware was loaded we should drop it
+	 * go back to first stage bootloader. */
+	if (!unplugged && (hif_dev->flags & HIF_USB_READY))
 		ath9k_hif_usb_reboot(udev);
 
 	kfree(hif_dev);

drivers/net/wireless/ath/ath9k/htc_drv_init.c

@@ -861,6 +861,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
 	if (error != 0)
 		goto err_rx;
 
+	ath9k_hw_disable(priv->ah);
 #ifdef CONFIG_MAC80211_LEDS
 	/* must be initialized before ieee80211_register_hw */
 	priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw,

drivers/net/wireless/ath/wil6210/debugfs.c

@@ -145,7 +145,7 @@ static void wil_print_ring(struct seq_file *s, const char *prefix,
 				   le16_to_cpu(hdr.type), hdr.flags);
 			if (len <= MAX_MBOXITEM_SIZE) {
 				int n = 0;
-				unsigned char printbuf[16 * 3 + 2];
+				char printbuf[16 * 3 + 2];
 				unsigned char databuf[MAX_MBOXITEM_SIZE];
 				void __iomem *src = wmi_buffer(wil, d.addr) +
 					sizeof(struct wil6210_mbox_hdr);
@@ -416,7 +416,7 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data)
 		seq_printf(s, "  SKB = %p\n", skb);
 
 		if (skb) {
-			unsigned char printbuf[16 * 3 + 2];
+			char printbuf[16 * 3 + 2];
 			int i = 0;
 			int len = le16_to_cpu(d->dma.length);
 			void *p = skb->data;

drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c

@@ -242,7 +242,7 @@ void brcmf_txflowblock_if(struct brcmf_if *ifp,
 {
 	unsigned long flags;
 
-	if (!ifp)
+	if (!ifp || !ifp->ndev)
 		return;
 
 	brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n",

drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c

@@ -1744,13 +1744,14 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 	ulong flags;
 	int fifo = BRCMF_FWS_FIFO_BCMC;
 	bool multicast = is_multicast_ether_addr(eh->h_dest);
+	bool pae = eh->h_proto == htons(ETH_P_PAE);
 
 	/* determine the priority */
 	if (!skb->priority)
 		skb->priority = cfg80211_classify8021d(skb);
 
 	drvr->tx_multicast += !!multicast;
-	if (ntohs(eh->h_proto) == ETH_P_PAE)
+	if (pae)
 		atomic_inc(&ifp->pend_8021x_cnt);
 
 	if (!brcmf_fws_fc_active(fws)) {
@@ -1781,6 +1782,11 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb)
 		brcmf_fws_schedule_deq(fws);
 	} else {
 		brcmf_err("drop skb: no hanger slot\n");
+		if (pae) {
+			atomic_dec(&ifp->pend_8021x_cnt);
+			if (waitqueue_active(&ifp->pend_8021x_wait))
+				wake_up(&ifp->pend_8021x_wait);
+		}
 		brcmu_pkt_buf_free_skb(skb);
 	}
 	brcmf_fws_unlock(drvr, flags);

drivers/net/wireless/cw1200/txrx.c

@@ -1165,7 +1165,7 @@ void cw1200_rx_cb(struct cw1200_common *priv,
 		if (cw1200_handle_action_rx(priv, skb))
 			return;
 	} else if (ieee80211_is_beacon(frame->frame_control) &&
-		   !arg->status &&
+		   !arg->status && priv->vif &&
 		   !memcmp(ieee80211_get_SA(frame), priv->vif->bss_conf.bssid,
 			   ETH_ALEN)) {
 		const u8 *tim_ie;

drivers/net/wireless/iwlwifi/dvm/main.c

@@ -758,7 +758,7 @@ int iwl_alive_start(struct iwl_priv *priv)
 					 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
 		if (ret)
 			return ret;
-	} else {
+	} else if (priv->lib->bt_params) {
 		/*
 		 * default is 2-wire BT coexexistence support
 		 */

drivers/net/wireless/iwlwifi/mvm/debugfs.c

@@ -988,7 +988,11 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	char buf[100];
 
-	if (!dbgfs_dir)
+	/*
+	 * Check if debugfs directory already exist before creating it.
+	 * This may happen when, for example, resetting hw or suspend-resume
+	 */
+	if (!dbgfs_dir || mvmvif->dbgfs_dir)
 		return;
 
 	mvmvif->dbgfs_dir = debugfs_create_dir("iwlmvm", dbgfs_dir);

drivers/net/wireless/iwlwifi/mvm/mac80211.c

@@ -257,7 +257,11 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	if (ret)
 		return ret;
 
-	return ieee80211_register_hw(mvm->hw);
+	ret = ieee80211_register_hw(mvm->hw);
+	if (ret)
+		iwl_mvm_leds_exit(mvm);
+
+	return ret;
 }
 
 static void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
@@ -385,6 +389,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm)
 	ieee80211_wake_queues(mvm->hw);
 
 	mvm->vif_count = 0;
+	mvm->rx_ba_sessions = 0;
 }
 
 static int iwl_mvm_mac_start(struct ieee80211_hw *hw)
@@ -1006,6 +1011,21 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
 	mutex_lock(&mvm->mutex);
 	if (old_state == IEEE80211_STA_NOTEXIST &&
 	    new_state == IEEE80211_STA_NONE) {
+		/*
+		 * Firmware bug - it'll crash if the beacon interval is less
+		 * than 16. We can't avoid connecting at all, so refuse the
+		 * station state change, this will cause mac80211 to abandon
+		 * attempts to connect to this AP, and eventually wpa_s will
+		 * blacklist the AP...
+		 */
+		if (vif->type == NL80211_IFTYPE_STATION &&
+		    vif->bss_conf.beacon_int < 16) {
+			IWL_ERR(mvm,
+				"AP %pM beacon interval is %d, refusing due to firmware bug!\n",
+				sta->addr, vif->bss_conf.beacon_int);
+			ret = -EINVAL;
+			goto out_unlock;
+		}
 		ret = iwl_mvm_add_sta(mvm, vif, sta);
 	} else if (old_state == IEEE80211_STA_NONE &&
 		   new_state == IEEE80211_STA_AUTH) {
@@ -1038,6 +1058,7 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw,
 	} else {
 		ret = -EIO;
 	}
+ out_unlock:
 	mutex_unlock(&mvm->mutex);
 
 	return ret;

drivers/net/wireless/iwlwifi/mvm/mvm.h

@@ -419,6 +419,7 @@ struct iwl_mvm {
 	struct work_struct sta_drained_wk;
 	unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)];
 	atomic_t pending_frames[IWL_MVM_STATION_COUNT];
+	u8 rx_ba_sessions;
 
 	/* configured by mac80211 */
 	u32 rts_threshold;

drivers/net/wireless/iwlwifi/mvm/scan.c

@@ -137,8 +137,8 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd,
 {
 	int fw_idx, req_idx;
 
-	fw_idx = 0;
-	for (req_idx = req->n_ssids - 1; req_idx > 0; req_idx--) {
+	for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx > 0;
+	     req_idx--, fw_idx++) {
 		cmd->direct_scan[fw_idx].id = WLAN_EID_SSID;
 		cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len;
 		memcpy(cmd->direct_scan[fw_idx].ssid,
@@ -153,7 +153,9 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd,
  * just to notify that this scan is active and not passive.
  * In order to notify the FW of the number of SSIDs we wish to scan (including
  * the zero-length one), we need to set the corresponding bits in chan->type,
- * one for each SSID, and set the active bit (first).
+ * one for each SSID, and set the active bit (first). The first SSID is already
+ * included in the probe template, so we need to set only req->n_ssids - 1 bits
+ * in addition to the first bit.
  */
 static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids)
 {
@@ -179,7 +181,7 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
 	__le32 chan_type_value;
 
 	if (req->n_ssids > 0)
-		chan_type_value = cpu_to_le32(BIT(req->n_ssids + 1) - 1);
+		chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1);
 	else
 		chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE;
 

drivers/net/wireless/iwlwifi/mvm/sta.c

@@ -608,6 +608,8 @@ int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *bsta)
 	return ret;
 }
 
+#define IWL_MAX_RX_BA_SESSIONS 16
+
 int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		       int tid, u16 ssn, bool start)
 {
@@ -618,11 +620,20 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 
 	lockdep_assert_held(&mvm->mutex);
 
+	if (start && mvm->rx_ba_sessions >= IWL_MAX_RX_BA_SESSIONS) {
+		IWL_WARN(mvm, "Not enough RX BA SESSIONS\n");
+		return -ENOSPC;
+	}
+
 	cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color);
 	cmd.sta_id = mvm_sta->sta_id;
 	cmd.add_modify = STA_MODE_MODIFY;
-	cmd.add_immediate_ba_tid = (u8) tid;
-	cmd.add_immediate_ba_ssn = cpu_to_le16(ssn);
+	if (start) {
+		cmd.add_immediate_ba_tid = (u8) tid;
+		cmd.add_immediate_ba_ssn = cpu_to_le16(ssn);
+	} else {
+		cmd.remove_immediate_ba_tid = (u8) tid;
+	}
 	cmd.modify_mask = start ? STA_MODIFY_ADD_BA_TID :
 				  STA_MODIFY_REMOVE_BA_TID;
 
@@ -648,6 +659,14 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		break;
 	}
 
+	if (!ret) {
+		if (start)
+			mvm->rx_ba_sessions++;
+		else if (mvm->rx_ba_sessions > 0)
+			/* check that restart flow didn't zero the counter */
+			mvm->rx_ba_sessions--;
+	}
+
 	return ret;
 }
 

drivers/net/wireless/mwifiex/init.c

@@ -693,7 +693,7 @@ int mwifiex_dnld_fw(struct mwifiex_adapter *adapter,
 		if (!ret) {
 			dev_notice(adapter->dev,
 				   "WLAN FW already running! Skip FW dnld\n");
-			goto done;
+			return 0;
 		}
 
 		poll_num = MAX_FIRMWARE_POLL_TRIES;
@@ -719,14 +719,8 @@ int mwifiex_dnld_fw(struct mwifiex_adapter *adapter,
 poll_fw:
 	/* Check if the firmware is downloaded successfully or not */
 	ret = adapter->if_ops.check_fw_status(adapter, poll_num);
-	if (ret) {
+	if (ret)
 		dev_err(adapter->dev, "FW failed to be active in time\n");
-		return -1;
-	}
-done:
-	/* re-enable host interrupt for mwifiex after fw dnld is successful */
-	if (adapter->if_ops.enable_int)
-		adapter->if_ops.enable_int(adapter);
 
 	return ret;
 }

drivers/net/wireless/mwifiex/main.c

@@ -427,6 +427,10 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 				"Cal data request_firmware() failed\n");
 	}
 
+	/* enable host interrupt after fw dnld is successful */
+	if (adapter->if_ops.enable_int)
+		adapter->if_ops.enable_int(adapter);
+
 	adapter->init_wait_q_woken = false;
 	ret = mwifiex_init_fw(adapter);
 	if (ret == -1) {
@@ -478,6 +482,8 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 	mwifiex_del_virtual_intf(adapter->wiphy, priv->wdev);
 	rtnl_unlock();
 err_init_fw:
+	if (adapter->if_ops.disable_int)
+		adapter->if_ops.disable_int(adapter);
 	pr_debug("info: %s: unregister device\n", __func__);
 	adapter->if_ops.unregister_dev(adapter);
 done:
@@ -855,7 +861,7 @@ mwifiex_add_card(void *card, struct semaphore *sem,
 	INIT_WORK(&adapter->main_work, mwifiex_main_work_queue);
 
 	/* Register the device. Fill up the private data structure with relevant
-	   information from the card and request for the required IRQ. */
+	   information from the card. */
 	if (adapter->if_ops.register_dev(adapter)) {
 		pr_err("%s: failed to register mwifiex device\n", __func__);
 		goto err_registerdev;
@@ -919,6 +925,11 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem)
 	if (!adapter)
 		goto exit_remove;
 
+	/* We can no longer handle interrupts once we start doing the teardown
+	 * below. */
+	if (adapter->if_ops.disable_int)
+		adapter->if_ops.disable_int(adapter);
+
 	adapter->surprise_removed = true;
 
 	/* Stop data */

drivers/net/wireless/mwifiex/main.h

@@ -601,6 +601,7 @@ struct mwifiex_if_ops {
 	int (*register_dev) (struct mwifiex_adapter *);
 	void (*unregister_dev) (struct mwifiex_adapter *);
 	int (*enable_int) (struct mwifiex_adapter *);
+	void (*disable_int) (struct mwifiex_adapter *);
 	int (*process_int_status) (struct mwifiex_adapter *);
 	int (*host_to_card) (struct mwifiex_adapter *, u8, struct sk_buff *,
 			     struct mwifiex_tx_param *);