drivers/ata/: Spelling fixes

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>

drivers/ata/ata_piix.c

@@ -837,7 +837,7 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	if (is_slave) {
 		/* clear TIME1|IE1|PPE1|DTE1 */
 		master_data &= 0xff0f;
-		/* Enable SITRE (seperate slave timing register) */
+		/* Enable SITRE (separate slave timing register) */
 		master_data |= 0x4000;
 		/* enable PPE1, IE1 and TIME1 as needed */
 		master_data |= (control << 4);

drivers/ata/libata-core.c

@@ -3097,7 +3097,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
 /**
  *	ata_do_set_mode - Program timings and issue SET FEATURES - XFER
  *	@link: link on which timings will be programmed
- *	@r_failed_dev: out paramter for failed device
+ *	@r_failed_dev: out parameter for failed device
  *
  *	Standard implementation of the function used to tune and set
  *	ATA device disk transfer mode (PIO3, UDMA6, etc.).  If

drivers/ata/pata_at32.c

@@ -324,7 +324,7 @@ static int __init pata_at32_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	/* Setup struct containing private infomation */
+	/* Setup struct containing private information */
 	info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;

drivers/ata/pata_efar.c

@@ -135,7 +135,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0x0F << shift;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;

drivers/ata/pata_it8213.c

@@ -128,7 +128,7 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		idetm_data &= 0xCC0F;
 		idetm_data |= (control << 4);
 
-		/* Slave timing in seperate register */
+		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;

drivers/ata/pata_sis.c

@@ -345,7 +345,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higer bits are dependant on the device */
+		   the higher bits are dependant on the device */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {
@@ -385,7 +385,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
-		   the higer bits are dependant on the device, bit 15 udma */
+		   the higher bits are dependant on the device, bit 15 udma */
 		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
 	} else {