Merge 4.1-rc7 into usb-next

This resolves a merge issue in musb_core.c and we want the fixes that
were in Linus's tree in this branch as well for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -162,7 +162,7 @@ Description:	Discover CPUs in the same CPU frequency coordination domain
 What:		/sys/devices/system/cpu/cpu*/cache/index3/cache_disable_{0,1}
 Date:		August 2008
 KernelVersion:	2.6.27
-Contact:	discuss@x86-64.org
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Disable L3 cache indices
 
 		These files exist in every CPU's cache/index3 directory. Each

Documentation/devicetree/bindings/clock/silabs,si5351.txt

@@ -17,7 +17,8 @@ Required properties:
 - #clock-cells: from common clock binding; shall be set to 1.
 - clocks: from common clock binding; list of parent clock
   handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only.
+  si5351c only. Corresponding clock input names are "xtal" and
+  "clkin" respectively.
 - #address-cells: shall be set to 1.
 - #size-cells: shall be set to 0.
 
@@ -71,6 +72,7 @@ i2c-master-node {
 
 		/* connect xtal input to 25MHz reference */
 		clocks = <&ref25>;
+		clock-names = "xtal";
 
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;

Documentation/devicetree/bindings/net/cdns-emac.txt

@@ -3,7 +3,8 @@
 Required properties:
 - compatible: Should be "cdns,[<chip>-]{emac}"
   Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  or the generic form: "cdns,emac".
+  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
+  Or the generic form: "cdns,emac".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain macb interrupt
 - phy-mode: see ethernet.txt file in the same directory.

Documentation/hwmon/tmp401

@@ -20,7 +20,7 @@ Supported chips:
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
   * Texas Instruments TMP435
     Prefix: 'tmp435'
-    Addresses scanned: I2C 0x37, 0x48 - 0x4f
+    Addresses scanned: I2C 0x48 - 0x4f
     Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
 
 Authors:

Documentation/target/tcmu-design.txt

@@ -15,8 +15,7 @@ Contents:
   a) Discovering and configuring TCMU uio devices
   b) Waiting for events on the device(s)
   c) Managing the command ring
-3) Command filtering and pass_level
-4) A final note
+3) A final note
 
 
 TCM Userspace Design
@@ -324,7 +323,7 @@ int handle_device_events(int fd, void *map)
   /* Process events from cmd ring until we catch up with cmd_head */
   while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) {
 
-    if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) {
+    if (tcmu_hdr_get_op(ent->hdr.len_op) == TCMU_OP_CMD) {
       uint8_t *cdb = (void *)mb + ent->req.cdb_off;
       bool success = true;
 
@@ -339,8 +338,12 @@ int handle_device_events(int fd, void *map)
         ent->rsp.scsi_status = SCSI_CHECK_CONDITION;
       }
     }
+    else if (tcmu_hdr_get_op(ent->hdr.len_op) != TCMU_OP_PAD) {
+      /* Tell the kernel we didn't handle unknown opcodes */
+      ent->hdr.uflags |= TCMU_UFLAG_UNKNOWN_OP;
+    }
     else {
-      /* Do nothing for PAD entries */
+      /* Do nothing for PAD entries except update cmd_tail */
     }
 
     /* update cmd_tail */
@@ -360,28 +363,6 @@ int handle_device_events(int fd, void *map)
 }
 
 
-Command filtering and pass_level
---------------------------------
-
-TCMU supports a "pass_level" option with valid values of 0 or 1.  When
-the value is 0 (the default), nearly all SCSI commands received for
-the device are passed through to the handler. This allows maximum
-flexibility but increases the amount of code required by the handler,
-to support all mandatory SCSI commands. If pass_level is set to 1,
-then only IO-related commands are presented, and the rest are handled
-by LIO's in-kernel command emulation. The commands presented at level
-1 include all versions of:
-
-READ
-WRITE
-WRITE_VERIFY
-XDWRITEREAD
-WRITE_SAME
-COMPARE_AND_WRITE
-SYNCHRONIZE_CACHE
-UNMAP
-
-
 A final note
 ------------
 

Documentation/virtual/kvm/mmu.txt

@@ -169,6 +169,10 @@ Shadow pages contain the following information:
     Contains the value of cr4.smep && !cr0.wp for which the page is valid
     (pages for which this is true are different from other pages; see the
     treatment of cr0.wp=0 below).
+  role.smap_andnot_wp:
+    Contains the value of cr4.smap && !cr0.wp for which the page is valid
+    (pages for which this is true are different from other pages; see the
+    treatment of cr0.wp=0 below).
   gfn:
     Either the guest page table containing the translations shadowed by this
     page, or the base page frame for linear translations.  See role.direct.
@@ -344,10 +348,16 @@ on fault type:
 
 (user write faults generate a #PF)
 
-In the first case there is an additional complication if CR4.SMEP is
-enabled: since we've turned the page into a kernel page, the kernel may now
-execute it.  We handle this by also setting spte.nx.  If we get a user
-fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back.
+In the first case there are two additional complications:
+- if CR4.SMEP is enabled: since we've turned the page into a kernel page,
+  the kernel may now execute it.  We handle this by also setting spte.nx.
+  If we get a user fetch or read fault, we'll change spte.u=1 and
+  spte.nx=gpte.nx back.
+- if CR4.SMAP is disabled: since the page has been changed to a kernel
+  page, it can not be reused when CR4.SMAP is enabled. We set
+  CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,
+  here we do not care the case that CR4.SMAP is enabled since KVM will
+  directly inject #PF to guest due to failed permission check.
 
 To prevent an spte that was converted into a kernel page with cr0.wp=0
 from being written by the kernel after cr0.wp has changed to 1, we make

MAINTAINERS

@@ -51,9 +51,9 @@ trivial patch so apply some common sense.
 	or does something very odd once a month document it.
 
 	PLEASE remember that submissions must be made under the terms
-	of the OSDL certificate of contribution and should include a
-	Signed-off-by: line.  The current version of this "Developer's
-	Certificate of Origin" (DCO) is listed in the file
+	of the Linux Foundation certificate of contribution and should
+	include a Signed-off-by: line.  The current version of this
+	"Developer's Certificate of Origin" (DCO) is listed in the file
 	Documentation/SubmittingPatches.
 
 6.	Make sure you have the right to send any changes you make. If you
@@ -2427,7 +2427,6 @@ L:	linux-security-module@vger.kernel.org
 S:	Supported
 F:	include/linux/capability.h
 F:	include/uapi/linux/capability.h
-F:	security/capability.c
 F:	security/commoncap.c
 F:	kernel/capability.c
 
@@ -3825,10 +3824,11 @@ M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
 
-EMULEX LPFC FC SCSI DRIVER
-M:	James Smart <james.smart@emulex.com>
+EMULEX/AVAGO LPFC FC/FCOE SCSI DRIVER
+M:	James Smart <james.smart@avagotech.com>
+M:	Dick Kennedy <dick.kennedy@avagotech.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://sourceforge.net/projects/lpfcxxxx
+W:	http://www.avagotech.com
 S:	Supported
 F:	drivers/scsi/lpfc/
 
@@ -4536,7 +4536,7 @@ M:	Jean Delvare <jdelvare@suse.de>
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T:	quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
@@ -7575,6 +7575,7 @@ F:	drivers/pci/host/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSIS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
+M:	Pratyush Anand <pratyush.anand@gmail.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	drivers/pci/host/*designware*
@@ -7588,8 +7589,9 @@ F:	Documentation/devicetree/bindings/pci/host-generic-pci.txt
 F:	drivers/pci/host/pci-host-generic.c
 
 PCIE DRIVER FOR ST SPEAR13XX
+M:	Pratyush Anand <pratyush.anand@gmail.com>
 L:	linux-pci@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	drivers/pci/host/*spear*
 
 PCMCIA SUBSYSTEM
@@ -8829,9 +8831,11 @@ F:	drivers/misc/phantom.c
 F:	include/uapi/linux/phantom.h
 
 SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
-M:	Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
+M:	Jayamohan Kallickal <jayamohan.kallickal@avagotech.com>
+M:	Minh Tran <minh.tran@avagotech.com>
+M:	John Soni Jose <sony.john-n@avagotech.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.emulex.com
+W:	http://www.avagotech.com
 S:	Supported
 F:	drivers/scsi/be2iscsi/
 
@@ -10592,8 +10596,7 @@ F:	drivers/virtio/virtio_input.c
 F:	include/uapi/linux/virtio_input.h
 
 VIA RHINE NETWORK DRIVER
-M:	Roger Luethi <rl@hellgate.ch>
-S:	Maintained
+S:	Orphan
 F:	drivers/net/ethernet/via/via-rhine.c
 
 VIA SD/MMC CARD CONTROLLER DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/alpha/boot/Makefile

@@ -14,6 +14,9 @@ targets		:= vmlinux.gz vmlinux \
 		   tools/bootpzh bootloader bootpheader bootpzheader 
 OBJSTRIP	:= $(obj)/tools/objstrip
 
+HOSTCFLAGS	:= -Wall -I$(objtree)/usr/include
+BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj)
+
 # SRM bootable image.  Copy to offset 512 of a partition.
 $(obj)/bootimage: $(addprefix $(obj)/tools/,mkbb lxboot bootlx) $(obj)/vmlinux.nh
 	( cat $(obj)/tools/lxboot $(obj)/tools/bootlx $(obj)/vmlinux.nh ) > $@ 
@@ -96,13 +99,14 @@ $(obj)/tools/bootph: $(obj)/bootpheader $(OBJSTRIP) FORCE
 $(obj)/tools/bootpzh: $(obj)/bootpzheader $(OBJSTRIP) FORCE
 	$(call if_changed,objstrip)
 
-LDFLAGS_bootloader   := -static -uvsprintf -T  #-N -relax
-LDFLAGS_bootpheader  := -static -uvsprintf -T  #-N -relax
-LDFLAGS_bootpzheader := -static -uvsprintf -T  #-N -relax
+LDFLAGS_bootloader   := -static -T # -N -relax
+LDFLAGS_bootloader   := -static -T # -N -relax
+LDFLAGS_bootpheader  := -static -T # -N -relax
+LDFLAGS_bootpzheader := -static -T # -N -relax
 
-OBJ_bootlx   := $(obj)/head.o $(obj)/main.o
-OBJ_bootph   := $(obj)/head.o $(obj)/bootp.o
-OBJ_bootpzh  := $(obj)/head.o $(obj)/bootpz.o $(obj)/misc.o
+OBJ_bootlx   := $(obj)/head.o $(obj)/stdio.o $(obj)/main.o
+OBJ_bootph   := $(obj)/head.o $(obj)/stdio.o $(obj)/bootp.o
+OBJ_bootpzh  := $(obj)/head.o $(obj)/stdio.o $(obj)/bootpz.o $(obj)/misc.o
 
 $(obj)/bootloader: $(obj)/bootloader.lds $(OBJ_bootlx) $(LIBS_Y) FORCE
 	$(call if_changed,ld)

arch/alpha/boot/main.c

@@ -19,7 +19,6 @@
 
 #include "ksize.h"
 
-extern int vsprintf(char *, const char *, va_list);
 extern unsigned long switch_to_osf_pal(unsigned long nr,
 	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
 	unsigned long *vptb);