---

yaml
---
r: 119963
b: refs/heads/master
c: 59da1f8
h: refs/heads/master
i:
  119961: 923b78b
  119959: f4fe300
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: a06d568f7c5e40e34ea64881842deb8f4382babf
+refs/heads/master: 59da1f87b276c593b852766c2fdcad62835970f7

trunk/Documentation/00-INDEX

@@ -42,14 +42,8 @@ IRQ.txt
 	- description of what an IRQ is.
 ManagementStyle
 	- how to (attempt to) manage kernel hackers.
-MSI-HOWTO.txt
-	- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
 RCU/
 	- directory with info on RCU (read-copy update).
-README.DAC960
-	- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
-README.cycladesZ
-	- info on Cyclades-Z firmware loading.
 SAK.txt
 	- info on Secure Attention Keys.
 SM501.txt
@@ -86,20 +80,16 @@ blackfin/
 	- directory with documentation for the Blackfin arch.
 block/
 	- info on the Block I/O (BIO) layer.
+blockdev/
+	- info on block devices & drivers
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
-cciss.txt
-	- info, major/minor #'s for Compaq's SMART Array Controllers.
 cdrom/
 	- directory with information on the CD-ROM drivers that Linux has.
-computone.txt
-	- info on Computone Intelliport II/Plus Multiport Serial Driver.
 connector/
 	- docs on the netlink based userspace<->kernel space communication mod.
 console/
 	- documentation on Linux console drivers.
-cpqarray.txt
-	- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
 cpu-freq/
 	- info on CPU frequency and voltage scaling.
 cpu-hotplug.txt
@@ -126,8 +116,6 @@ device-mapper/
 	- directory with info on Device Mapper.
 devices.txt
 	- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
-digiepca.txt
-	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 dontdiff
 	- file containing a list of files that should never be diff'ed.
 driver-model/
@@ -152,14 +140,10 @@ filesystems/
 	- info on the vfs and the various filesystems that Linux supports.
 firmware_class/
 	- request_firmware() hotplug interface info.
-floppy.txt
-	- notes and driver options for the floppy disk driver.
 frv/
 	- Fujitsu FR-V Linux documentation.
 gpio.txt
 	- overview of GPIO (General Purpose Input/Output) access conventions.
-hayes-esp.txt
-	- info on using the Hayes ESP serial driver.
 highuid.txt
 	- notes on the change from 16 bit to 32 bit user/group IDs.
 timers/
@@ -186,8 +170,6 @@ io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/
 	- directory with documents describing various IOCTL calls.
-ioctl-number.txt
-	- how to implement and register device/driver ioctl calls.
 iostats.txt
 	- info on I/O statistics Linux kernel provides.
 irqflags-tracing.txt
@@ -250,14 +232,10 @@ mips/
 	- directory with info about Linux on MIPS architecture.
 mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
-moxa-smartio
-	- file with info on installing/using Moxa multiport serial driver.
 mutex-design.txt
 	- info on the generic mutex subsystem.
 namespaces/
 	- directory with various information about namespaces
-nbd.txt
-	- info on a TCP implementation of a network block device.
 netlabel/
 	- directory with information on the NetLabel subsystem.
 networking/
@@ -270,8 +248,6 @@ numastat.txt
 	- info on how to read Numa policy hit/miss statistics in sysfs.
 oops-tracing.txt
 	- how to decode those nasty internal kernel error dump messages.
-paride.txt
-	- information about the parallel port IDE subsystem.
 parisc/
 	- directory with info on using Linux on PA-RISC architecture.
 parport.txt
@@ -294,18 +270,12 @@ printk-formats.txt
 	- how to get printk format specifiers right
 prio_tree.txt
 	- info on radix-priority-search-tree use for indexing vmas.
-ramdisk.txt
-	- short guide on how to set up and use the RAM disk.
 rbtree.txt
 	- info on what red-black trees are and what they are for.
-riscom8.txt
-	- notes on using the RISCom/8 multi-port serial driver.
 robust-futex-ABI.txt
 	- documentation of the robust futex ABI.
 robust-futexes.txt
 	- a description of what robust futexes are.
-rocket.txt
-	- info on the Comtrol RocketPort multiport serial driver.
 rt-mutex-design.txt
 	- description of the RealTime mutex implementation design.
 rt-mutex.txt
@@ -334,8 +304,6 @@ sparc/
 	- directory with info on using Linux on Sparc architecture.
 sparse.txt
 	- info on how to obtain and use the sparse tool for typechecking.
-specialix.txt
-	- info on hardware/driver for specialix IO8+ multiport serial card.
 spi/
 	- overview of Linux kernel Serial Peripheral Interface (SPI) support.
 spinlocks.txt
@@ -344,14 +312,10 @@ stable_api_nonsense.txt
 	- info on why the kernel does not have a stable in-kernel api or abi.
 stable_kernel_rules.txt
 	- rules and procedures for the -stable kernel releases.
-stallion.txt
-	- info on using the Stallion multiport serial driver.
 svga.txt
 	- short guide on selecting video modes at boot via VGA BIOS.
 sysfs-rules.txt
 	- How not to use sysfs.
-sx.txt
-	- info on the Specialix SX/SI multiport serial driver.
 sysctl/
 	- directory with info on the /proc/sys/* files.
 sysrq.txt
@@ -360,8 +324,6 @@ telephony/
 	- directory with info on telephony (e.g. voice over IP) support.
 time_interpolators.txt
 	- info on time interpolators.
-tty.txt
-	- guide to the locking policies of the tty layer.
 uml/
 	- directory with information about User Mode Linux.
 unicode.txt

trunk/Documentation/DMA-API.txt

@@ -316,12 +316,10 @@ reduce current DMA mapping usage or delay and try again later).
 	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
 		int nents, int direction)
 
-Maps a scatter gather list from the block layer.
-
 Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
 
 Please note that the sg cannot be mapped again if it has been mapped once.
 The mapping process is allowed to destroy information in the sg.

trunk/Documentation/PCI/00-INDEX

@@ -1,5 +1,7 @@
 00-INDEX
 	- this file
+MSI-HOWTO.txt
+	- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
 PCI-DMA-mapping.txt
 	- info for PCI drivers using DMA portably across all platforms
 PCIEBUS-HOWTO.txt

trunk/Documentation/arm/mem_alignment

@@ -24,7 +24,7 @@ real bad - it changes the behaviour of all unaligned instructions in user
 space, and might cause programs to fail unexpectedly.
 
 To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment.  The number is made up from various bits:
+/proc/cpu/alignment.  The number is made up from various bits:
 
 bit		behavior when set
 ---		-----------------

trunk/Documentation/blockdev/00-INDEX

@@ -0,0 +1,16 @@
+00-INDEX
+	- this file
+README.DAC960
+	- info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux.
+cciss.txt
+	- info, major/minor #'s for Compaq's SMART Array Controllers.
+cpqarray.txt
+	- info on using Compaq's SMART2 Intelligent Disk Array Controllers.
+floppy.txt
+	- notes and driver options for the floppy disk driver.
+nbd.txt
+	- info on a TCP implementation of a network block device.
+paride.txt
+	- information about the parallel port IDE subsystem.
+ramdisk.txt
+	- short guide on how to set up and use the RAM disk.

trunk/Documentation/cpu-freq/user-guide.txt

@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

trunk/Documentation/filesystems/ocfs2.txt

@@ -28,10 +28,7 @@ Manish Singh  <manish.singh@oracle.com>
 Caveats
 =======
 Features which OCFS2 does not support yet:
-	- extended attributes
 	- quotas
-	- cluster aware flock
-	- cluster aware lockf
 	- Directory change notification (F_NOTIFY)
 	- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
 	- POSIX ACLs

trunk/Documentation/filesystems/proc.txt

@@ -44,6 +44,7 @@ Table of Contents
   2.14	/proc/<pid>/io - Display the IO accounting fields
   2.15	/proc/<pid>/coredump_filter - Core dump filtering settings
   2.16	/proc/<pid>/mountinfo - Information about mounts
+  2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
 
 ------------------------------------------------------------------------------
 Preface
@@ -2483,4 +2484,30 @@ For more information on mount propagation see:
 
   Documentation/filesystems/sharedsubtree.txt
 
+2.17	/proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for  max_user_watches  is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
 ------------------------------------------------------------------------------
+

trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

trunk/Documentation/input/input-programming.txt

@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

trunk/Documentation/ioctl/00-INDEX

@@ -0,0 +1,10 @@
+00-INDEX
+	- this file
+cdrom.txt
+	- summary of CDROM ioctl calls
+hdio.txt
+	- summary of HDIO_ ioctl calls
+ioctl-decoding.txt
+	- how to decode the bits of an IOCTL code
+ioctl-number.txt
+	- how to implement and register device/driver ioctl calls