[SCSI] lpfc 8.3.19: Added support for ELS RRQ command

Added support for ELS RRQ command

- Add new routine lpfc_set_rrq_active() to track XRI qualifier state.
- Add new module parameter lpfc_enable_rrq to control RRQ operation.
- Add logic to ELS RRQ completion handler and xri qualifier timeout
  to clear XRI qualifier state.
- Use OX_ID from XRI_ABORTED_CQE for RRQ payload.
- Tie abort and XRI_ABORTED_CQE andler to RRQ generation.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/lpfc/lpfc.h

@@ -486,7 +486,7 @@ struct lpfc_hba {
 	int (*lpfc_new_scsi_buf)
 		(struct lpfc_vport *, int);
 	struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
-		(struct lpfc_hba *);
+		(struct lpfc_hba *, struct lpfc_nodelist *);
 	int (*lpfc_scsi_prep_dma_buf)
 		(struct lpfc_hba *, struct lpfc_scsi_buf *);
 	void (*lpfc_scsi_unprep_dma_buf)
@@ -574,6 +574,7 @@ struct lpfc_hba {
 #define HBA_FIP_SUPPORT		0x800 /* FIP support in HBA */
 #define HBA_AER_ENABLED		0x1000 /* AER enabled with HBA */
 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
+#define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
 	struct lpfc_dmabuf slim2p;
 
@@ -623,6 +624,7 @@ struct lpfc_hba {
 	/* HBA Config Parameters */
 	uint32_t cfg_ack0;
 	uint32_t cfg_enable_npiv;
+	uint32_t cfg_enable_rrq;
 	uint32_t cfg_topology;
 	uint32_t cfg_link_speed;
 	uint32_t cfg_cr_delay;
@@ -733,6 +735,7 @@ struct lpfc_hba {
 	uint32_t total_scsi_bufs;
 	struct list_head lpfc_iocb_list;
 	uint32_t total_iocbq_bufs;
+	struct list_head active_rrq_list;
 	spinlock_t hbalock;
 
 	/* pci_mem_pools */
@@ -745,6 +748,7 @@ struct lpfc_hba {
 
 	mempool_t *mbox_mem_pool;
 	mempool_t *nlp_mem_pool;
+	mempool_t *rrq_pool;
 
 	struct fc_host_statistics link_stats;
 	enum intr_type_t intr_type;
@@ -801,6 +805,7 @@ struct lpfc_hba {
 	unsigned long skipped_hb;
 	struct timer_list hb_tmofunc;
 	uint8_t hb_outstanding;
+	struct timer_list rrq_tmr;
 	enum hba_temp_state over_temp_state;
 	/* ndlp reference management */
 	spinlock_t ndlp_lock;

drivers/scsi/lpfc/lpfc_attr.c

@@ -1977,6 +1977,13 @@ lpfc_param_show(enable_npiv);
 lpfc_param_init(enable_npiv, 1, 0, 1);
 static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL);
 
+int lpfc_enable_rrq;
+module_param(lpfc_enable_rrq, int, 0);
+MODULE_PARM_DESC(lpfc_enable_rrq, "Enable RRQ functionality");
+lpfc_param_show(enable_rrq);
+lpfc_param_init(enable_rrq, 0, 0, 1);
+static DEVICE_ATTR(lpfc_enable_rrq, S_IRUGO, lpfc_enable_rrq_show, NULL);
+
 /*
 # lpfc_suppress_link_up:  Bring link up at initialization
 #            0x0  = bring link up (issue MBX_INIT_LINK)
@@ -3394,6 +3401,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_fdmi_on,
 	&dev_attr_lpfc_max_luns,
 	&dev_attr_lpfc_enable_npiv,
+	&dev_attr_lpfc_enable_rrq,
 	&dev_attr_nport_evt_cnt,
 	&dev_attr_board_mode,
 	&dev_attr_max_vpi,
@@ -4610,6 +4618,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_link_speed_init(phba, lpfc_link_speed);
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
+	lpfc_enable_rrq_init(phba, lpfc_enable_rrq);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
 	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
 	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);

drivers/scsi/lpfc/lpfc_crtn.h

@@ -416,5 +416,13 @@ struct lpfc_iocbq *lpfc_sli_ringtx_get(struct lpfc_hba *,
 int __lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 	struct lpfc_iocbq *, uint32_t);
 uint32_t lpfc_drain_txq(struct lpfc_hba *);
-
-
+void lpfc_clr_rrq_active(struct lpfc_hba *, uint16_t, struct lpfc_node_rrq *);
+int lpfc_test_rrq_active(struct lpfc_hba *, struct lpfc_nodelist *, uint16_t);
+void lpfc_handle_rrq_active(struct lpfc_hba *);
+int lpfc_send_rrq(struct lpfc_hba *, struct lpfc_node_rrq *);
+int lpfc_set_rrq_active(struct lpfc_hba *, struct lpfc_nodelist *,
+	uint16_t, uint16_t, uint16_t);
+void lpfc_cleanup_wt_rrqs(struct lpfc_hba *);
+void lpfc_cleanup_vports_rrqs(struct lpfc_vport *);
+struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t,
+	uint32_t);

drivers/scsi/lpfc/lpfc_disc.h

@@ -68,6 +68,12 @@ struct lpfc_fast_path_event {
 	} un;
 };
 
+#define LPFC_SLI4_MAX_XRI	1024	/* Used to make the ndlp's xri_bitmap */
+#define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG)
+struct lpfc_node_rrqs {
+	unsigned long xri_bitmap[XRI_BITMAP_ULONGS];
+};
+
 struct lpfc_nodelist {
 	struct list_head nlp_listp;
 	struct lpfc_name nlp_portname;
@@ -110,8 +116,19 @@ struct lpfc_nodelist {
 	atomic_t cmd_pending;
 	uint32_t cmd_qdepth;
 	unsigned long last_change_time;
+	struct lpfc_node_rrqs active_rrqs;
 	struct lpfc_scsicmd_bkt *lat_data;	/* Latency data */
 };
+struct lpfc_node_rrq {
+	struct list_head list;
+	uint16_t xritag;
+	uint16_t send_rrq;
+	uint16_t rxid;
+	uint32_t         nlp_DID;		/* FC D_ID of entry */
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	unsigned long rrq_stop_time;
+};
 
 /* Defines for nlp_flag (uint32) */
 #define NLP_IGNR_REG_CMPL  0x00000001 /* Rcvd rscn before we cmpl reg login */