---

yaml
---
r: 310579
b: refs/heads/master
c: 2d5c7cd
h: refs/heads/master
i:
  310577: 30f4f34
  310575: 58acb5f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5736603bef2383b6bb07f88596ccc8c387d91121
+refs/heads/master: 2d5c7cd35f1addb812e0b1709b3c727f1a58ca9c

trunk/.mailmap

@@ -113,3 +113,5 @@ Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
+Gustavo Padovan <gustavo@las.ic.unicamp.br>
+Gustavo Padovan <padovan@profusion.mobi>

trunk/Documentation/ABI/testing/sysfs-block-rssd

@@ -6,13 +6,21 @@ Description:    This is a read-only file. Dumps below driver information and
                 hardware registers.
                     - S ACTive
                     - Command Issue
-                    - Allocated
                     - Completed
                     - PORT IRQ STAT
                     - HOST IRQ STAT
+                    - Allocated
+                    - Commands in Q
 
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:   This is a read-only file. Indicates the status of the device.
+Description:    This is a read-only file. Indicates the status of the device.
+
+What:           /sys/block/rssd*/flags
+Date:           May 2012
+KernelVersion:  3.5
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Dumps the flags in port and driver
+                data structure

trunk/Documentation/ABI/testing/sysfs-bus-fcoe

@@ -0,0 +1,77 @@
+What:		/sys/bus/fcoe/ctlr_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE Controller' instances on the fcoe bus
+Attributes:
+
+	fcf_dev_loss_tmo: Device loss timeout peroid (see below). Changing
+			  this value will change the dev_loss_tmo for all
+			  FCFs discovered by this controller.
+
+	lesb_link_fail:   Link Error Status Block (LESB) link failure count.
+
+	lesb_vlink_fail:  Link Error Status Block (LESB) virtual link
+			  failure count.
+
+	lesb_miss_fka:    Link Error Status Block (LESB) missed FCoE
+			  Initialization Protocol (FIP) Keep-Alives (FKA).
+
+	lesb_symb_err:    Link Error Status Block (LESB) symbolic error count.
+
+	lesb_err_block:   Link Error Status Block (LESB) block error count.
+
+	lesb_fcs_error:   Link Error Status Block (LESB) Fibre Channel
+			  Serivces error count.
+
+Notes: ctlr_X (global increment starting at 0)
+
+What:		/sys/bus/fcoe/fcf_X
+Date:		March 2012
+KernelVersion:	TBD
+Contact:	Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
+Description:	'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
+		Forwarder, which is a FCoE switch that can accept FCoE
+		(Ethernet) packets, unpack them, and forward the embedded
+		Fibre Channel frames into a FC fabric. It can also take
+		outbound FC frames and pack them in Ethernet packets to
+		be sent to their destination on the Ethernet segment.
+Attributes:
+
+	fabric_name: Identifies the fabric that the FCF services.
+
+	switch_name: Identifies the FCF.
+
+	priority:    The switch's priority amongst other FCFs on the same
+		     fabric.
+
+	selected:    1 indicates that the switch has been selected for use;
+		     0 indicates that the swich will not be used.
+
+	fc_map:      The Fibre Channel MAP
+
+	vfid:	     The Virtual Fabric ID
+
+	mac:         The FCF's MAC address
+
+	fka_peroid:  The FIP Keep-Alive peroid
+
+	fabric_state: The internal kernel state
+		      "Unknown" - Initialization value
+		      "Disconnected" - No link to the FCF/fabric
+		      "Connected" - Host is connected to the FCF
+		      "Deleted" - FCF is being removed from the system
+
+	dev_loss_tmo: The device loss timeout peroid for this FCF.
+
+Notes: A device loss infrastructre similar to the FC Transport's
+       is present in fcoe_sysfs. It is nice to have so that a
+       link flapping adapter doesn't continually advance the count
+       used to identify the discovered FCF. FCFs will exist in a
+       "Disconnected" state until either the timer expires and the
+       FCF becomes "Deleted" or the FCF is rediscovered and becomes
+       "Connected."
+
+
+Users: The first user of this interface will be the fcoeadm application,
+       which is commonly packaged in the fcoe-utils package.

trunk/Documentation/ABI/testing/sysfs-bus-i2c-devices-lm3533

@@ -0,0 +1,15 @@
+What:		/sys/bus/i2c/devices/.../output_hvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling backlight device for high-voltage current
+		sink HVLED[n] (n = 1, 2) (0, 1).
+
+What:		/sys/bus/i2c/devices/.../output_lvled[n]
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the controlling led device for low-voltage current sink
+		LVLED[n] (n = 1..5) (0..3).

trunk/Documentation/ABI/testing/sysfs-bus-rbd

@@ -65,11 +65,11 @@ snap_*
 Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
 -------------------------------------------------------------
 
-id
+snap_id
 
 	The rados internal snapshot id assigned for this snapshot
 
-size
+snap_size
 
 	The size of the image when this snapshot was taken.
 

trunk/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533

@@ -0,0 +1,48 @@
+What:		/sys/class/backlight/<backlight>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the ALS output channel used as input in
+		ALS-current-control mode (0, 1), where
+
+		0 - out_current0 (backlight 0)
+		1 - out_current1 (backlight 1)
+
+What:		/sys/class/backlight/<backlight>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/backlight/<backlight>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this backlight (0, 1).
+
+What:		/sys/class/backlight/<backlight>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/backlight/<backlight>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled

trunk/Documentation/ABI/testing/sysfs-class-led-driver-lm3533

@@ -0,0 +1,65 @@
+What:		/sys/class/leds/<led>/als_channel
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the ALS output channel to use as input in
+		ALS-current-control mode (1, 2), where
+
+		1 - out_current1
+		2 - out_current2
+
+What:		/sys/class/leds/<led>/als_en
+Date:		May 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Enable ALS-current-control mode (0, 1).
+
+What:		/sys/class/leds/<led>/falltime
+What:		/sys/class/leds/<led>/risetime
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the pattern generator fall and rise times (0..7), where
+
+		0 - 2048 us
+		1 - 262 ms
+		2 - 524 ms
+		3 - 1.049 s
+		4 - 2.097 s
+		5 - 4.194 s
+		6 - 8.389 s
+		7 - 16.78 s
+
+What:		/sys/class/leds/<led>/id
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Get the id of this led (0..3).
+
+What:		/sys/class/leds/<led>/linear
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the brightness-mapping mode (0, 1), where
+
+		0 - exponential mode
+		1 - linear mode
+
+What:		/sys/class/leds/<led>/pwm
+Date:		April 2012
+KernelVersion:	3.5
+Contact:	Johan Hovold <jhovold@gmail.com>
+Description:
+		Set the PWM-input control mask (5 bits), where
+
+		bit 5 - PWM-input enabled in Zone 4
+		bit 4 - PWM-input enabled in Zone 3
+		bit 3 - PWM-input enabled in Zone 2
+		bit 2 - PWM-input enabled in Zone 1
+		bit 1 - PWM-input enabled in Zone 0
+		bit 0 - PWM-input enabled

trunk/Documentation/ABI/testing/sysfs-class-mtd

@@ -123,3 +123,54 @@ Description:
 		half page, or a quarter page).
 
 		In the case of ECC NOR, it is the ECC block size.
+
+What:		/sys/class/mtd/mtdX/ecc_strength
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Maximum number of bit errors that the device is capable of
+		correcting within each region covering an ecc step.  This will
+		always be a non-negative integer.  Note that some devices will
+		have multiple ecc steps within each writesize region.
+
+		In the case of devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bitflip_threshold
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		This allows the user to examine and adjust the criteria by which
+		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
+		bit errors that were corrected on any single region comprising
+		an ecc step (as reported by the driver) equals or exceeds this
+		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
+		returned.  Higher layers (e.g., UBI) use this return code as an
+		indication that an erase block may be degrading and should be
+		scrutinized as a candidate for being marked as bad.
+
+		The initial value may be specified by the flash device driver.
+		If not, then the default value is ecc_strength.
+
+		The introduction of this feature brings a subtle change to the
+		meaning of the -EUCLEAN return code.  Previously, it was
+		interpreted to mean simply "one or more bit errors were
+		corrected".  Its new interpretation can be phrased as "a
+		dangerously high number of bit errors were corrected on one or
+		more regions comprising an ecc step".  The precise definition of
+		"dangerously high" can be adjusted by the user with
+		bitflip_threshold.  Users are discouraged from doing this,
+		however, unless they know what they are doing and have intimate
+		knowledge of the properties of their device.  Broadly speaking,
+		bitflip_threshold should be low enough to detect genuine erase
+		block degradation, but high enough to avoid the consequences of
+		a persistent return value of -EUCLEAN on devices where sticky
+		bitflips occur.  Note that if bitflip_threshold exceeds
+		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
+		returned, absent a hard error.
+
+		This is generally applicable only to NAND flash devices with ECC
+		capability.  It is ignored on devices lacking ECC capability;
+		i.e., devices for which ecc_strength is zero.

trunk/Documentation/CodingStyle

@@ -671,8 +671,9 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
-the API documentation for further information about them.
+kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and
+vzalloc().  Please refer to the API documentation for further information
+about them.
 
 The preferred form for passing a size of a struct is the following:
 
@@ -686,6 +687,17 @@ Casting the return value which is a void pointer is redundant. The conversion
 from void pointer to any other pointer type is guaranteed by the C programming
 language.
 
+The preferred form for allocating an array is the following:
+
+	p = kmalloc_array(n, sizeof(...), ...);
+
+The preferred form for allocating a zeroed array is the following:
+
+	p = kcalloc(n, sizeof(...), ...);
+
+Both forms check for overflow on the allocation size n * sizeof(...),
+and return NULL if that occurred.
+
 
 		Chapter 15: The inline disease
 

trunk/Documentation/DocBook/mtdnand.tmpl

@@ -1119,8 +1119,6 @@ in this page</entry>
 		These constants are defined in nand.h. They are ored together to describe
 		the chip functionality.
      		<programlisting>
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR	0x00000001
 /* Buswitdh is 16 bit */
 #define NAND_BUSWIDTH_16	0x00000002
 /* Device supports partial programming without padding */