---

yaml --- r: 86575 b: refs/heads/master c: b84f08d h: refs/heads/master i: 86573: 9e2a5e3 86571: 68ce76f 86567: 098f1c5 86559: 7367023 v: v3
git-mirror · Feb 29, 2008 · 1a99435 · 1a99435
1 parent efb6cd2
commit 1a99435
Show file tree

Hide file tree

Showing 254 changed files with 2,897 additions and 4,711 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 99642e211a789df34347c3f10f0301462837f0c5
+refs/heads/master: b84f08d49188a18d965fab8463c9cb679785eb39
diff --git a/trunk/Documentation/debugging-via-ohci1394.txt b/trunk/Documentation/debugging-via-ohci1394.txt
@@ -36,15 +36,14 @@ available (notebooks) or too slow for extensive debug information (like ACPI).
 Drivers
 -------
 
-The ohci1394 driver in drivers/ieee1394 initializes the OHCI-1394 controllers
-to a working state and enables physical DMA by default for all remote nodes.
-This can be turned off by ohci1394's module parameter phys_dma=0.
-
-The alternative firewire-ohci driver in drivers/firewire uses filtered physical
-DMA, hence is not yet suitable for remote debugging.
-
-Because ohci1394 depends on the PCI enumeration to be completed, an
-initialization routine which runs pretty early (long before console_init()
+The OHCI-1394 drivers in drivers/firewire and drivers/ieee1394 initialize
+the OHCI-1394 controllers to a working state and can be used to enable
+physical DMA. By default you only have to load the driver, and physical
+DMA access will be granted to all remote nodes, but it can be turned off
+when using the ohci1394 driver.
+
+Because these drivers depend on the PCI enumeration to be completed, an
+initialization routine which can runs pretty early (long before console_init(),
 which makes the printk buffer appear on the console can be called) was written.
 
 To activate it, enable CONFIG_PROVIDE_OHCI1394_DMA_INIT (Kernel hacking menu:

diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -172,16 +172,6 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
-What:	ide-tape driver
-When:	July 2008
-Files:	drivers/ide/ide-tape.c
-Why:	This driver might not have any users anymore and maintaining it for no
-	reason is an effort no one wants to make.
-Who:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>, Borislav Petkov
-	<petkovbb@googlemail.com>
-
----------------------------
-
 What: libata spindown skipping and warning
 When: Dec 2008
 Why:  Some halt(8) implementations synchronize caches for and spin

diff --git a/trunk/Documentation/ide.txt b/trunk/Documentation/ide.txt
@@ -258,6 +258,8 @@ Summary of ide driver parameters for kernel command line
 			  As for VLB, it is safest to not specify it.
 			  Bigger values are safer than smaller ones.
 
+ "idex=noprobe"		: do not attempt to access/use this interface
+
  "idex=base"		: probe for an interface at the addr specified,
 			  where "base" is usually 0x1f0 or 0x170
 			  and "ctl" is assumed to be "base"+0x206
@@ -305,6 +307,53 @@ Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb"
 kernel paremeter to enable probing for VLB version of the chipset (PCI ones
 are detected automatically).
 
+================================================================================
+
+IDE ATAPI streaming tape driver
+-------------------------------
+
+This driver is a part of the Linux ide driver and works in co-operation
+with linux/drivers/block/ide.c.
+
+The driver, in co-operation with ide.c, basically traverses the
+request-list for the block device interface. The character device
+interface, on the other hand, creates new requests, adds them
+to the request-list of the block device, and waits for their completion.
+
+Pipelined operation mode is now supported on both reads and writes.
+
+The block device major and minor numbers are determined from the
+tape's relative position in the ide interfaces, as explained in ide.c.
+
+The character device interface consists of the following devices:
+
+ ht0		major 37, minor 0	first  IDE tape, rewind on close.
+ ht1		major 37, minor 1	second IDE tape, rewind on close.
+ ...
+ nht0		major 37, minor 128	first  IDE tape, no rewind on close.
+ nht1		major 37, minor 129	second IDE tape, no rewind on close.
+ ...
+
+Run /dev/MAKEDEV to create the above entries.
+
+The general magnetic tape commands compatible interface, as defined by
+include/linux/mtio.h, is accessible through the character device.
+
+General ide driver configuration options, such as the interrupt-unmask
+flag, can be configured by issuing an ioctl to the block device interface,
+as any other ide device.
+
+Our own ide-tape ioctl's can be issued to either the block device or
+the character device interface.
+
+Maximal throughput with minimal bus load will usually be achieved in the
+following scenario:
+
+	1.	ide-tape is operating in the pipelined operation mode.
+	2.	No buffering is performed by the user backup program.
+
+
+
 ================================================================================
 
 Some Terminology

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -767,14 +767,14 @@ S:	Maintained
 
 BLACKFIN ARCHITECTURE
 P:	Bryan Wu
-M:	cooloney@kernel.org
+M:	bryan.wu@analog.com
 L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:	http://blackfin.uclinux.org
 S:	Supported
 
 BLACKFIN EMAC DRIVER
 P:	Bryan Wu
-M:	cooloney@kernel.org
+M:	bryan.wu@analog.com
 L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
 W:	http://blackfin.uclinux.org
 S:	Supported
@@ -982,12 +982,6 @@ M:	mchan@broadcom.com
 L:	netdev@vger.kernel.org
 S:	Supported
 
-BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P:	Eliezer Tamir
-M:	eliezert@broadcom.com
-L:	netdev@vger.kernel.org
-S:	Supported
-
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 P:	Michael Chan
 M:	mchan@broadcom.com
@@ -2750,8 +2744,6 @@ S:	Maintained
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 P:	Faisal Latif
 M:	flatif@neteffect.com
-P:	Nishi Gupta
-M:	ngupta@neteffect.com
 P:	Glenn Streiff
 M:	gstreiff@neteffect.com
 L:	general@lists.openfabrics.org
@@ -3892,13 +3884,10 @@ M:	trivial@kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
-TULIP NETWORK DRIVERS
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
-P:	Kyle McMartin
-M:	kyle@parisc-linux.org
-L:	netdev@vger.kernel.org
-S:	Maintained
+TULIP NETWORK DRIVER
+L:	tulip-users@lists.sourceforge.net
+W:	http://sourceforge.net/projects/tulip/
+S:	Orphan
 
 TUN/TAP driver
 P:	Maxim Krasnyansky

diff --git a/trunk/arch/avr32/boards/atstk1000/atstk1004.c b/trunk/arch/avr32/boards/atstk1000/atstk1004.c
@@ -129,7 +129,7 @@ static int __init atstk1004_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
 	at32_add_device_mci(0);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,

diff --git a/trunk/arch/avr32/kernel/process.c b/trunk/arch/avr32/kernel/process.c
@@ -11,7 +11,6 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
-#include <linux/tick.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
@@ -31,10 +30,8 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
 		while (!need_resched())
 			cpu_idle_sleep();
-		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -348,7 +345,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	p->thread.cpu_context.ksp = (unsigned long)childregs;
 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
 
-	clear_tsk_thread_flag(p, TIF_DEBUG);
 	if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
 		ocd_enable(p);
 

diff --git a/trunk/arch/avr32/mm/fault.c b/trunk/arch/avr32/mm/fault.c
@@ -189,8 +189,6 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 
 	page = sysreg_read(PTBR);
 	printk(KERN_ALERT "ptbr = %08lx", page);
-	if (address >= TASK_SIZE)
-		page = (unsigned long)swapper_pg_dir;
 	if (page) {
 		page = ((unsigned long *)page)[address >> 22];
 		printk(" pgd = %08lx", page);

diff --git a/trunk/arch/blackfin/Makefile b/trunk/arch/blackfin/Makefile
@@ -98,11 +98,8 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 #	them changed.  We use .mach to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-       show_mach_symlink = :
- quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
-silent_show_mach_symlink = :
 include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@$($(quiet)show_mach_symlink)
+	@echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
 ifneq ($(KBUILD_SRC),)
 	$(Q)mkdir -p include/asm-$(ARCH)
 	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach

diff --git a/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.22.14
+# Thu Nov 29 17:32:47 2007
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -115,10 +116,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Processor and Board Settings
 #
 # CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
 # CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
 CONFIG_BF527=y
 # CONFIG_BF531 is not set
 # CONFIG_BF532 is not set
@@ -308,7 +306,6 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
 CONFIG_L1_MAX_PIECE=16
-# CONFIG_MPU is not set
 
 #
 # Asynchonous Memory Configuration
@@ -357,7 +354,6 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking
@@ -500,6 +496,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
 # CONFIG_MTD_ABSENT is not set
@@ -509,6 +506,9 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_BF5xx=m
+CONFIG_BFIN_FLASH_SIZE=0x400000
+CONFIG_EBIU_FLASH_BASE=0x20000000
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -684,6 +684,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_BF53X_PFBUTTONS is not set
 # CONFIG_TWI_KEYPAD is not set
 
 #
@@ -701,12 +702,12 @@ CONFIG_INPUT_MISC=y
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
 # CONFIG_AD5304 is not set
+# CONFIG_BF5xx_TEA5764 is not set
+# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -771,6 +772,7 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_GPIO is not set

diff --git a/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -322,9 +322,10 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -696,6 +697,7 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set

diff --git a/trunk/arch/blackfin/configs/BF533-STAMP_defconfig b/trunk/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -323,9 +323,10 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x80
 
 #
 # CPU Frequency scaling
@@ -713,6 +714,7 @@ CONFIG_SERIAL_BFIN_DMA=y
 # CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
 # CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set

diff --git a/trunk/arch/blackfin/configs/BF537-STAMP_defconfig b/trunk/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -330,9 +330,10 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
+CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
+# CONFIG_PM_WAKEUP_GPIO_API is not set
+CONFIG_PM_WAKEUP_SIC_IWR=0x8
 
 #
 # CPU Frequency scaling
@@ -1012,7 +1013,6 @@ CONFIG_SND_BFIN_AD73311_SE=4
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=m
 CONFIG_SND_BF5XX_SOC=m
-CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set

diff --git a/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -396,7 +396,6 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # CPU Frequency scaling
@@ -1076,7 +1075,6 @@ CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BF5XX_SOC=y
-CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set

diff --git a/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig b/trunk/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -367,7 +367,6 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Networking